One of the challenges for bimetal manufacturing is the joining process.Hence,transient liquid phase(TLP)bonding was performed between 304L stainless steel and Cp-Ti using an Ag-Cu interlayer with a thickness of 75μm ...One of the challenges for bimetal manufacturing is the joining process.Hence,transient liquid phase(TLP)bonding was performed between 304L stainless steel and Cp-Ti using an Ag-Cu interlayer with a thickness of 75μm for bonding time of 20,40,60,and 90 min.The bonding temperature of 860℃ was considered,which is under the β transus temperature of Cp-Ti.During TLP bonding,various intermetallic compounds(IMCs),including Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe),Ti_(2)(Cu,Ag),and Ti_(2)Cu from 304L toward Cp-Ti formed in the joint.Also,on the one side,with the increase in time,further diffusion of elements decreases the blocky IMCs such as Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe)in the 304L diffusion-affected zone(DAZ)and reaction zone,and on the other side,Ti_(2)(Cu,Ag)IMC transformed into fine morphology toward Cp-Ti DAZ.The microhardness test also demonstrated that the(Cr,Fe)_(2)Ti+Ti_(5)Cr_(7)Fe_(17) IMCs in the DAZ on the side of 304L have a hardness value of HV 564,making it the hardest phase.The maximum and minimum shear strength values are equal to 78.84 and 29.0 MPa,respectively.The cleavage pattern dominated fracture surfaces due to the formation of brittle phases in dissimilar joints.展开更多
Field trials on a silt-loamy paddy soil derived from shallow-sea deposit in direct seeding rice fields were conducted in Zhejiang, China, in 1996 to compare N efficiency of controlled release fertilizers (LP fertilize...Field trials on a silt-loamy paddy soil derived from shallow-sea deposit in direct seeding rice fields were conducted in Zhejiang, China, in 1996 to compare N efficiency of controlled release fertilizers (LP fertilizers) with the conventional urea. Six treatments including CK (no N fertilizer), conventional urea and different types of LP fertilizers at different rates were designed for two succeeding crops of early and late rice. A blend of different types of LP fertilizers as a single preplant "co-situs" application released N in a rate and amount synchronizing with uptake pattern of direct seeding rice. A single preplant application of the LP fertilizers could meet the N requirement of rice for the whole growth period without need of topdressing. Using LP fertilizer blends, equivalent grain yields could be maintained even if the N fertilization rates were reduced by 25%～50% compared with the conventional urea. Agronomic efficiency of the LP fertilizers was 13.6%～ 86.4% higher than that of the conventional urea in early rice and 100%～164.1% in late rice, depending on the amounts of the LP fertilizers applied. N fertilizer recovery rate increased from 27.4% for the conventional application of urea to 41.7%～54.l% for the single preplant "co-situs" application of the LP fertilizers. Use of the LP fertilizers was promising if the increase in production costs due to the high LP fertilizer prices could be compensated by increase in yield and N efficiency, reduction in labor costs and improvement in environment.展开更多
The dissimilar joining of CP-copper to 304 stainless steel was performed by gas tungsten arc welding process using different filler materials. The results indicated the formation of defect free joint by using copper f...The dissimilar joining of CP-copper to 304 stainless steel was performed by gas tungsten arc welding process using different filler materials. The results indicated the formation of defect free joint by using copper filler material. But, the presence of some defects like solidification crack and lack of fusion caused decreasing tensile strength of other joints. In the optimum conditions, the tensile strength of the joint was 96% of the weaker material. Also, this joint was bent till to 180° without any macroscopic defects like separation, tearing or fracture. It was concluded that copper is a new and good candidate for gas tungsten arc welding of copper to 304 stainless steel.展开更多
TiAl alloy and 316L stainless steel were vacuum-brazed with Zr−50.0Cu−7.1Ni−7.1Al(at.%)amorphous filler metal.The influence of brazing time and temperature on the interfacial microstructure and shear strength of the r...TiAl alloy and 316L stainless steel were vacuum-brazed with Zr−50.0Cu−7.1Ni−7.1Al(at.%)amorphous filler metal.The influence of brazing time and temperature on the interfacial microstructure and shear strength of the resultant joints was investigated.The brazed seam consisted of three layers,including two diffusion layers and one residual filler metal layer.The typical microstructure of brazed TiAl alloy/316L stainless steel joint was TiAl alloy substrate/α2-(Ti3Al)/AlCuTi/residual filler metal/Cu9Zr11+Fe23Zr6/Laves-Fe2Zr/α-(Fe,Cr)/316L stainless steel substrate.Discontinuous brittle Fe2Zr layer formed near the interface between the residual filler metal layer andα-(Fe,Cr)layer.The maximum shear strength of brazed joints reached 129 MPa when brazed at 1020℃ for 10 min.The diffusion activation energies ofα2-(Ti3Al)andα-(Fe,Cr)phases were−195.769 and−112.420 kJ/mol,respectively,the diffusion constants for these two phases were 3.639×10^(−6) and 7.502×10^(−10)μm^(2)/s,respectively.Cracks initiated at Fe2Zr layer and propagated into the residual filler metal layer during the shear test.The Laves-Fe2Zr phase existing on the fracture surface suggested the brittle fracture mode of the brazed joints.展开更多
[Objective] This study presents a method for mass rearing of Aphidius gifuensis, a dominant endoparasitoid of Myzus persicae on tobacco in Southwest China. [Method] The tobacco cultivar Honghuadajinyuan(Nicotiana taba...[Objective] This study presents a method for mass rearing of Aphidius gifuensis, a dominant endoparasitoid of Myzus persicae on tobacco in Southwest China. [Method] The tobacco cultivar Honghuadajinyuan(Nicotiana tabacum) was used as the host plant and M. persicae was the host insect. In a greenhouse, tobacco seedlings were reared in plastic trays. The seedlings at three-true-leaf stage were inoculated with two to three aphids per plant using aphid source with a parasitism rate of 47% ±3.9%. [Result] By this inoculation method, the aphids and parasites were simultaneously inoculated on host plants. After approximately 25 d of rearing, we were able to produce 82.5±5.17 aphid mummies per tobacco seedling. A total of 445 500 aphid mummies were produced in one greenhouse(36 rearing trays per greenhouse) during an approximately 50-day rearing period. The emergence rate was 93.4% ±2.76%, and 54% of the mummies were females. [Conclusion] The demonstrated technological feasibility of using tobacco seedlings for the mass rearing of A. gifuensis increases the potential for the biological control of M. persicae.展开更多
Material flow and phase transformation were studied at the interface of dissimilar joint between Al 6013 and Mg, produced by stir friction welding （FSW） experiments. Defect-free weld was obtained when aluminum and m...Material flow and phase transformation were studied at the interface of dissimilar joint between Al 6013 and Mg, produced by stir friction welding （FSW） experiments. Defect-free weld was obtained when aluminum and magnesium were placed in the advancing side and retreating side respectively and the tool was placed 1 mm off the weld centerline into the aluminum side. In order to understand the material flow during FSW, steel shots were implanted as indexes into the welding path. After welding, using X-ray images, secondary positions of the steel shots were evaluated. It was revealed that steel shots implanted in advancing side were penetrated from the advancing side into the retreating side, whereas the shots implanted in the retreating side remained in the retreating side, without penetrating into the advancing side. The welded specimens were also heat treated. The effects of heat treatment on the mechanical properties of the welds and the formation of new intermetallic layers were investigated. Two intermetallic compounds, Al3Mg2 and Al12Mg17, were formed sequentially at Al6013/Mg interface.展开更多
For the purpose of improving the defects of the conventional friction welding method, the new friction welding technology has been examined. That is, the aim of the study is producing the joint of dissimilar materials...For the purpose of improving the defects of the conventional friction welding method, the new friction welding technology has been examined. That is, the aim of the study is producing the joint of dissimilar materials evaluated to be difficult for friction welding and non-round shape joints. In this process, after the intermediate material generates the independent friction heat on every side of the specimens, it is removed instantaneously and upset process begins to weld the specimens for a joint. In this study, similar joint of A2017 aluminum alloy and one of S45C steel were examined. On the other hand, thermal elastic-plastic stress analysis by the finite element method was carried out using ANSYS mechanical.展开更多
A research on the topic was conducted at the Experimental Station of Agriculture--Khan Krum during the period 2009-2011. The dynamics of growth and thickening of the cultivars Independence, Nectagrand 2, Aureliogrand,...A research on the topic was conducted at the Experimental Station of Agriculture--Khan Krum during the period 2009-2011. The dynamics of growth and thickening of the cultivars Independence, Nectagrand 2, Aureliogrand, Fantasy, Kassiopeia and Caldessi 2000 grafted on seedling rootstock （Elbert） and clonal GF-677 have been studied in the second year of nursery. The aim of the study was to investigate the growth characteristics of the introduced cultivars of nectarines grafted on traditional seedling rootstock （Elbert） and GF-677. At the beginning of the vegetation period of the seed cultivar rootstock （Elbert） has strong growth and thickening of the stem. The dynamics of growth and thickening of the stem depend on the used rootstock and cultivar. The obtained planting material corresponds to the existing quality standards.展开更多
文摘One of the challenges for bimetal manufacturing is the joining process.Hence,transient liquid phase(TLP)bonding was performed between 304L stainless steel and Cp-Ti using an Ag-Cu interlayer with a thickness of 75μm for bonding time of 20,40,60,and 90 min.The bonding temperature of 860℃ was considered,which is under the β transus temperature of Cp-Ti.During TLP bonding,various intermetallic compounds(IMCs),including Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe),Ti_(2)(Cu,Ag),and Ti_(2)Cu from 304L toward Cp-Ti formed in the joint.Also,on the one side,with the increase in time,further diffusion of elements decreases the blocky IMCs such as Ti_(5)Cr_(7)Fe_(17),(Cr,Fe)_(2)Ti,Ti(Cu,Fe)in the 304L diffusion-affected zone(DAZ)and reaction zone,and on the other side,Ti_(2)(Cu,Ag)IMC transformed into fine morphology toward Cp-Ti DAZ.The microhardness test also demonstrated that the(Cr,Fe)_(2)Ti+Ti_(5)Cr_(7)Fe_(17) IMCs in the DAZ on the side of 304L have a hardness value of HV 564,making it the hardest phase.The maximum and minimum shear strength values are equal to 78.84 and 29.0 MPa,respectively.The cleavage pattern dominated fracture surfaces due to the formation of brittle phases in dissimilar joints.
文摘Field trials on a silt-loamy paddy soil derived from shallow-sea deposit in direct seeding rice fields were conducted in Zhejiang, China, in 1996 to compare N efficiency of controlled release fertilizers (LP fertilizers) with the conventional urea. Six treatments including CK (no N fertilizer), conventional urea and different types of LP fertilizers at different rates were designed for two succeeding crops of early and late rice. A blend of different types of LP fertilizers as a single preplant "co-situs" application released N in a rate and amount synchronizing with uptake pattern of direct seeding rice. A single preplant application of the LP fertilizers could meet the N requirement of rice for the whole growth period without need of topdressing. Using LP fertilizer blends, equivalent grain yields could be maintained even if the N fertilization rates were reduced by 25%～50% compared with the conventional urea. Agronomic efficiency of the LP fertilizers was 13.6%～ 86.4% higher than that of the conventional urea in early rice and 100%～164.1% in late rice, depending on the amounts of the LP fertilizers applied. N fertilizer recovery rate increased from 27.4% for the conventional application of urea to 41.7%～54.l% for the single preplant "co-situs" application of the LP fertilizers. Use of the LP fertilizers was promising if the increase in production costs due to the high LP fertilizer prices could be compensated by increase in yield and N efficiency, reduction in labor costs and improvement in environment.
文摘The dissimilar joining of CP-copper to 304 stainless steel was performed by gas tungsten arc welding process using different filler materials. The results indicated the formation of defect free joint by using copper filler material. But, the presence of some defects like solidification crack and lack of fusion caused decreasing tensile strength of other joints. In the optimum conditions, the tensile strength of the joint was 96% of the weaker material. Also, this joint was bent till to 180° without any macroscopic defects like separation, tearing or fracture. It was concluded that copper is a new and good candidate for gas tungsten arc welding of copper to 304 stainless steel.
基金financially supported by the National Natural Science Foundation of China(No.51674060)Collaborative Innovation Center of Major Machine Manufacturing in Liaoning province,China。
文摘TiAl alloy and 316L stainless steel were vacuum-brazed with Zr−50.0Cu−7.1Ni−7.1Al(at.%)amorphous filler metal.The influence of brazing time and temperature on the interfacial microstructure and shear strength of the resultant joints was investigated.The brazed seam consisted of three layers,including two diffusion layers and one residual filler metal layer.The typical microstructure of brazed TiAl alloy/316L stainless steel joint was TiAl alloy substrate/α2-(Ti3Al)/AlCuTi/residual filler metal/Cu9Zr11+Fe23Zr6/Laves-Fe2Zr/α-(Fe,Cr)/316L stainless steel substrate.Discontinuous brittle Fe2Zr layer formed near the interface between the residual filler metal layer andα-(Fe,Cr)layer.The maximum shear strength of brazed joints reached 129 MPa when brazed at 1020℃ for 10 min.The diffusion activation energies ofα2-(Ti3Al)andα-(Fe,Cr)phases were−195.769 and−112.420 kJ/mol,respectively,the diffusion constants for these two phases were 3.639×10^(−6) and 7.502×10^(−10)μm^(2)/s,respectively.Cracks initiated at Fe2Zr layer and propagated into the residual filler metal layer during the shear test.The Laves-Fe2Zr phase existing on the fracture surface suggested the brittle fracture mode of the brazed joints.
基金Supported by Yunnan Provincial Tobacco Corporation(09YN015,2012YN14)
文摘[Objective] This study presents a method for mass rearing of Aphidius gifuensis, a dominant endoparasitoid of Myzus persicae on tobacco in Southwest China. [Method] The tobacco cultivar Honghuadajinyuan(Nicotiana tabacum) was used as the host plant and M. persicae was the host insect. In a greenhouse, tobacco seedlings were reared in plastic trays. The seedlings at three-true-leaf stage were inoculated with two to three aphids per plant using aphid source with a parasitism rate of 47% ±3.9%. [Result] By this inoculation method, the aphids and parasites were simultaneously inoculated on host plants. After approximately 25 d of rearing, we were able to produce 82.5±5.17 aphid mummies per tobacco seedling. A total of 445 500 aphid mummies were produced in one greenhouse(36 rearing trays per greenhouse) during an approximately 50-day rearing period. The emergence rate was 93.4% ±2.76%, and 54% of the mummies were females. [Conclusion] The demonstrated technological feasibility of using tobacco seedlings for the mass rearing of A. gifuensis increases the potential for the biological control of M. persicae.
文摘Material flow and phase transformation were studied at the interface of dissimilar joint between Al 6013 and Mg, produced by stir friction welding （FSW） experiments. Defect-free weld was obtained when aluminum and magnesium were placed in the advancing side and retreating side respectively and the tool was placed 1 mm off the weld centerline into the aluminum side. In order to understand the material flow during FSW, steel shots were implanted as indexes into the welding path. After welding, using X-ray images, secondary positions of the steel shots were evaluated. It was revealed that steel shots implanted in advancing side were penetrated from the advancing side into the retreating side, whereas the shots implanted in the retreating side remained in the retreating side, without penetrating into the advancing side. The welded specimens were also heat treated. The effects of heat treatment on the mechanical properties of the welds and the formation of new intermetallic layers were investigated. Two intermetallic compounds, Al3Mg2 and Al12Mg17, were formed sequentially at Al6013/Mg interface.
文摘For the purpose of improving the defects of the conventional friction welding method, the new friction welding technology has been examined. That is, the aim of the study is producing the joint of dissimilar materials evaluated to be difficult for friction welding and non-round shape joints. In this process, after the intermediate material generates the independent friction heat on every side of the specimens, it is removed instantaneously and upset process begins to weld the specimens for a joint. In this study, similar joint of A2017 aluminum alloy and one of S45C steel were examined. On the other hand, thermal elastic-plastic stress analysis by the finite element method was carried out using ANSYS mechanical.
文摘A research on the topic was conducted at the Experimental Station of Agriculture--Khan Krum during the period 2009-2011. The dynamics of growth and thickening of the cultivars Independence, Nectagrand 2, Aureliogrand, Fantasy, Kassiopeia and Caldessi 2000 grafted on seedling rootstock （Elbert） and clonal GF-677 have been studied in the second year of nursery. The aim of the study was to investigate the growth characteristics of the introduced cultivars of nectarines grafted on traditional seedling rootstock （Elbert） and GF-677. At the beginning of the vegetation period of the seed cultivar rootstock （Elbert） has strong growth and thickening of the stem. The dynamics of growth and thickening of the stem depend on the used rootstock and cultivar. The obtained planting material corresponds to the existing quality standards.
