In relay-assisted multi-user system, relay coding is important to enhance the robustness and reliability of cooperative transmission. For better adaptability and efficiency, two joint network and fountain coding(JNFC)...In relay-assisted multi-user system, relay coding is important to enhance the robustness and reliability of cooperative transmission. For better adaptability and efficiency, two joint network and fountain coding(JNFC) schemes are proposed. When the condition of all direct channels is worse, JNFC scheme based on distributed LT(DLT) codes is used. Otherwise, JNFC scheme based on multi-dimensional LT(MD-LT) codes is suited. For both two above-mentioned schemes, the united degree distribution design method for short-length fountain codes is proposed. For the latter scheme, MD-LT codes are proposed for equal error protection(EEP) of each user. Simulation results and analysis show that the united degree distribution need less decoding overhead compared with other degree distribution for short-length fountain codes. And then, all users are protected equally in despite of asymmetric uplinks.展开更多
Even though various wireless Net- work Access Technologies （NATs） with dif- ferent specifications and applications have been developed in the recent years, no single wireless technology alone can satisfy the any- ti...Even though various wireless Net- work Access Technologies （NATs） with dif- ferent specifications and applications have been developed in the recent years, no single wireless technology alone can satisfy the any- time, anywhere, and any service wire- less-access needs of mobile users. A real seamless wireless mobile environment is only realized by considering vertical and horizontal handoffs together. One of the major design issues in heterogeneous wireless networks is the support of Vertical Handoff （VHO）. VHO occurs when a multi-interface enabled mobile terminal changes its Point of Attachment （PoA） from one type of wireless access technology to another, while maintaining an active session. In this paper we present a novel multi-criteria VHO algorithm, which chooses the target NAT based on several factors such as user preferences, system parameters, and traf- tic-types with varying Quality of Service （QoS） requirements. Two modules i.e., VHO Neces- sity Estimation （VHONE） module and target NAT selection module, are designed. Both modules utilize several ＂weighted＂ users＇ and system＇s parameters. To improve the robust- ness of the proposed algorithm, the weighting system is designed based on the concept of fuzzy linguistic variables.展开更多
In this research paper, we research on the automatic pattern abstraction and recognition method for large-scale database system based on natural language processing. In distributed database, through the network connec...In this research paper, we research on the automatic pattern abstraction and recognition method for large-scale database system based on natural language processing. In distributed database, through the network connection between nodes, data across different nodes and even regional distribution are well recognized. In order to reduce data redundancy and model design of the database will usually contain a lot of forms we combine the NLP theory to optimize the traditional method. The experimental analysis and simulation proves the correctness of our method.展开更多
his paper studies the vehicle CAN bus control technology, and analyzes the control system of automobile based on CAN technology. This paper focus on the design of single-chip microcomputer STC89C52 be as the platform ...his paper studies the vehicle CAN bus control technology, and analyzes the control system of automobile based on CAN technology. This paper focus on the design of single-chip microcomputer STC89C52 be as the platform to achieve the design of CAN bus, introduce in detail the structure and working principle of SJA1000 and PCA82C250, and on basis of it, we design the CAN bus interface, and gives the hardware circuit design and software process of SJA1000 initialization, receiving, sending message. The system can give some subsequent reference for CAN bus application.展开更多
To solve the issue of downloading speed and application scenarios limitation of current JTAGLink debugger, this paper presents a new scheme of ARM debugger with the feature of Ethemet interface implemented by pure har...To solve the issue of downloading speed and application scenarios limitation of current JTAGLink debugger, this paper presents a new scheme of ARM debugger with the feature of Ethemet interface implemented by pure hardware logic design. This paper outlines the principle of the scheme, blocks of logic design, and protocols design. The scheme provides higher downloading speed, wider flexibility on application, and improves work efficiency evidently. Key words： JTAGLink Debugger; Ethernet; FPGA; Logic Design展开更多
基金supported in part by a grant from the Ph.D. Programs Foundation of Ministry of Education of China under Grants No. 20094307110004National Natural Science Foundation of China under Grants No.61372098, No.61101074Natural Science Foundation of Hunan Province, China under Grants No.12jj2037
文摘In relay-assisted multi-user system, relay coding is important to enhance the robustness and reliability of cooperative transmission. For better adaptability and efficiency, two joint network and fountain coding(JNFC) schemes are proposed. When the condition of all direct channels is worse, JNFC scheme based on distributed LT(DLT) codes is used. Otherwise, JNFC scheme based on multi-dimensional LT(MD-LT) codes is suited. For both two above-mentioned schemes, the united degree distribution design method for short-length fountain codes is proposed. For the latter scheme, MD-LT codes are proposed for equal error protection(EEP) of each user. Simulation results and analysis show that the united degree distribution need less decoding overhead compared with other degree distribution for short-length fountain codes. And then, all users are protected equally in despite of asymmetric uplinks.
文摘Even though various wireless Net- work Access Technologies （NATs） with dif- ferent specifications and applications have been developed in the recent years, no single wireless technology alone can satisfy the any- time, anywhere, and any service wire- less-access needs of mobile users. A real seamless wireless mobile environment is only realized by considering vertical and horizontal handoffs together. One of the major design issues in heterogeneous wireless networks is the support of Vertical Handoff （VHO）. VHO occurs when a multi-interface enabled mobile terminal changes its Point of Attachment （PoA） from one type of wireless access technology to another, while maintaining an active session. In this paper we present a novel multi-criteria VHO algorithm, which chooses the target NAT based on several factors such as user preferences, system parameters, and traf- tic-types with varying Quality of Service （QoS） requirements. Two modules i.e., VHO Neces- sity Estimation （VHONE） module and target NAT selection module, are designed. Both modules utilize several ＂weighted＂ users＇ and system＇s parameters. To improve the robust- ness of the proposed algorithm, the weighting system is designed based on the concept of fuzzy linguistic variables.
文摘In this research paper, we research on the automatic pattern abstraction and recognition method for large-scale database system based on natural language processing. In distributed database, through the network connection between nodes, data across different nodes and even regional distribution are well recognized. In order to reduce data redundancy and model design of the database will usually contain a lot of forms we combine the NLP theory to optimize the traditional method. The experimental analysis and simulation proves the correctness of our method.
文摘his paper studies the vehicle CAN bus control technology, and analyzes the control system of automobile based on CAN technology. This paper focus on the design of single-chip microcomputer STC89C52 be as the platform to achieve the design of CAN bus, introduce in detail the structure and working principle of SJA1000 and PCA82C250, and on basis of it, we design the CAN bus interface, and gives the hardware circuit design and software process of SJA1000 initialization, receiving, sending message. The system can give some subsequent reference for CAN bus application.
文摘To solve the issue of downloading speed and application scenarios limitation of current JTAGLink debugger, this paper presents a new scheme of ARM debugger with the feature of Ethemet interface implemented by pure hardware logic design. This paper outlines the principle of the scheme, blocks of logic design, and protocols design. The scheme provides higher downloading speed, wider flexibility on application, and improves work efficiency evidently. Key words： JTAGLink Debugger; Ethernet; FPGA; Logic Design
