A new LDMOST structure, named B-LDMOST that has a buried layer under the drain is proposed. The buried layer is not connected to the drift region, so it can optimize the vertical field distribution and increase breakd...A new LDMOST structure, named B-LDMOST that has a buried layer under the drain is proposed. The buried layer is not connected to the drift region, so it can optimize the vertical field distribution and increase breakdown voltage. The analysis and the simulated results show that B-LDMOST can increase breakdown voltage, with almost negligible influence on the other parameters such as on-resistance, switching time, and so on.展开更多
This paper lenges in the design of discusses some chal- millimeter-wave （mln- wave） circuits and systems for 5th generation （5G） wireless systems in CMOS process. The properties of some passive and active devices ...This paper lenges in the design of discusses some chal- millimeter-wave （mln- wave） circuits and systems for 5th generation （5G） wireless systems in CMOS process. The properties of some passive and active devices such as inductors, capacitors, transmission lines, translbrmers and transistors in mm-wave frequency band are discussed. Self-healing technique dealing with PVT variation, res- onant mode switching technique to enhance frequency tuning range of voltage controlled oscillator （VCO） and dual mode technique for power amplifier （PA） efficiency enhancement are introduced. At last, A fully-integrated 60 GHz 5 Gb/s QPSK transceiver with the transmit/receive （T/R） switch in 65nm CMOS process is introduced. The measured error vector magnitude （EVM） of the TX is -21.9 dB while the bit error rate （BER） of the RX with a -52 dBm sine-wave input is below 8e-7 when transmitting/receiving 5 Gb/s data. The transceiver is powered by 1.0 V and 1.2 V supply （except the phase-frequency detector and charge-pump in the frequency synthesizer which are powered by 2.5 V supply） and con- sumes 135 mW in TX mode and 176 mW in RX mode.展开更多
The thin emitter structure was introduced into reversely switched dynistor（RSD） to improve its turn-on characteristics. According to the analysis of turn-on condition, thin emitter structure is capable of reducing t...The thin emitter structure was introduced into reversely switched dynistor（RSD） to improve its turn-on characteristics. According to the analysis of turn-on condition, thin emitter structure is capable of reducing the extraction action for the triggering plasma layer P1 during turn-on process, and satisfying the requirement that triggering electric charge cannot be exhausted and therefore enables RSD to turn on uniformly. The on-state thin emitter RSD was equivalent to an asymmetric pin diode model. The simulation result shows that the forward voltage drop of RSD falls with the decrease of doping dose in p^＋-emitter in a certain range, and when the doping concentration is extremely tow, the decrease of the width of p^＋-emitter can obtain a tow forward voltage drop. Thin emitter RSD chips were made by sintering AI on n-Si. The test result shows that their turn-on process is uniform and the voltage drop is 7.5 V when the peak conversion current is 5 500 A.展开更多
基金Supported by the National Natural Science Foundation of China(No.69776041)
文摘A new LDMOST structure, named B-LDMOST that has a buried layer under the drain is proposed. The buried layer is not connected to the drift region, so it can optimize the vertical field distribution and increase breakdown voltage. The analysis and the simulated results show that B-LDMOST can increase breakdown voltage, with almost negligible influence on the other parameters such as on-resistance, switching time, and so on.
基金supported in part by the National Natural Science Foundation of China under Grant 61331003 and Grant 61222405
文摘This paper lenges in the design of discusses some chal- millimeter-wave （mln- wave） circuits and systems for 5th generation （5G） wireless systems in CMOS process. The properties of some passive and active devices such as inductors, capacitors, transmission lines, translbrmers and transistors in mm-wave frequency band are discussed. Self-healing technique dealing with PVT variation, res- onant mode switching technique to enhance frequency tuning range of voltage controlled oscillator （VCO） and dual mode technique for power amplifier （PA） efficiency enhancement are introduced. At last, A fully-integrated 60 GHz 5 Gb/s QPSK transceiver with the transmit/receive （T/R） switch in 65nm CMOS process is introduced. The measured error vector magnitude （EVM） of the TX is -21.9 dB while the bit error rate （BER） of the RX with a -52 dBm sine-wave input is below 8e-7 when transmitting/receiving 5 Gb/s data. The transceiver is powered by 1.0 V and 1.2 V supply （except the phase-frequency detector and charge-pump in the frequency synthesizer which are powered by 2.5 V supply） and con- sumes 135 mW in TX mode and 176 mW in RX mode.
基金National Natural Science Foundation of China(No.50277016 and 50577028)the Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20050487044)
文摘The thin emitter structure was introduced into reversely switched dynistor（RSD） to improve its turn-on characteristics. According to the analysis of turn-on condition, thin emitter structure is capable of reducing the extraction action for the triggering plasma layer P1 during turn-on process, and satisfying the requirement that triggering electric charge cannot be exhausted and therefore enables RSD to turn on uniformly. The on-state thin emitter RSD was equivalent to an asymmetric pin diode model. The simulation result shows that the forward voltage drop of RSD falls with the decrease of doping dose in p^＋-emitter in a certain range, and when the doping concentration is extremely tow, the decrease of the width of p^＋-emitter can obtain a tow forward voltage drop. Thin emitter RSD chips were made by sintering AI on n-Si. The test result shows that their turn-on process is uniform and the voltage drop is 7.5 V when the peak conversion current is 5 500 A.
