This paper presents a general analytical model of flexible isolation system for application to the installation of high-speed machines and lightweight structures. Piezoelectric stack actuators are employed in the mode...This paper presents a general analytical model of flexible isolation system for application to the installation of high-speed machines and lightweight structures. Piezoelectric stack actuators are employed in the model to achieve vibration control of flexible structures, and dynamic characteristics are also investigated. Mobility technique is used to derive the governing equations of the system. The power flow transmitted into the foundation is solved and considered as a cost function to achieve optimal control of vibration isolation. Some numerical simulations revealed that the analytical model is effective as piezoelectric stack actuators can achieve substantial vibration attenuation by selecting proper value of the input voltage.展开更多
Molybdenum ditelluride （MoTe2） has been demonstrated great potential in electronic and optoelectronic applications. However, the reported effective hole mobility remains far below its theoretical value. Herein, taki...Molybdenum ditelluride （MoTe2） has been demonstrated great potential in electronic and optoelectronic applications. However, the reported effective hole mobility remains far below its theoretical value. Herein, taking advantage of high-κ screening effect, we have fabricated back-gated MoTe2 transistors on an Al2O3 high-κ dielectric and systematically investigated the electronic and optoelectronic proper- ties. A high current on/off ratio exceeding 106 is achieved in the Al2O3-based MoTe2 transistors, and the hole mobility is demonstrated to be 150 cm2 V^-1 s^-1, compared to 0.2-20 cm^2 V^-1 s^-1 ever obtained from back-gated MoTe2 transistors in the literatures. Moreover, a considerable hole concentration of 1.2 × 10^13 cm 2 is attained in our Al2O3-based MoTe2 transistors owing to the strong gate control capa- bility, leading to a high on-state hole current of 6.1 μA μm^-1. After optimization, our Al2O3-based MoTe2 phototransistor exhibits outstanding photodetective performance, with a high responsivity of 543 AW^-1 and a high photogain of 1,662 at 405 nm light illumination, which are boosted around 419 times compared to the referential SiO2-based control devices. The mechanisms of photoconductivity in the Al2O3-based MoTe2 phototransistors have been analyzed in detail, and the photogating effect is considered to play an important role. This work may provide useful insight to improve carrier mobility in two-dimensional layered semiconductors and open opportunities to facilitate the development of high-performance photodetectors in the future.展开更多
基金Project (No. 2004035223) supported by the Postdoctoral ScienceFoundation of China
文摘This paper presents a general analytical model of flexible isolation system for application to the installation of high-speed machines and lightweight structures. Piezoelectric stack actuators are employed in the model to achieve vibration control of flexible structures, and dynamic characteristics are also investigated. Mobility technique is used to derive the governing equations of the system. The power flow transmitted into the foundation is solved and considered as a cost function to achieve optimal control of vibration isolation. Some numerical simulations revealed that the analytical model is effective as piezoelectric stack actuators can achieve substantial vibration attenuation by selecting proper value of the input voltage.
基金supported by the National Key Research and Development Program of China(2016YFA0302300,016YFA0200400)the National Science and Technology Major Project of China(2016ZX02301001)+1 种基金the National Natural Science Foundation of China(61306105)the Tsinghua University Initiative Scientific Research Program
文摘Molybdenum ditelluride （MoTe2） has been demonstrated great potential in electronic and optoelectronic applications. However, the reported effective hole mobility remains far below its theoretical value. Herein, taking advantage of high-κ screening effect, we have fabricated back-gated MoTe2 transistors on an Al2O3 high-κ dielectric and systematically investigated the electronic and optoelectronic proper- ties. A high current on/off ratio exceeding 106 is achieved in the Al2O3-based MoTe2 transistors, and the hole mobility is demonstrated to be 150 cm2 V^-1 s^-1, compared to 0.2-20 cm^2 V^-1 s^-1 ever obtained from back-gated MoTe2 transistors in the literatures. Moreover, a considerable hole concentration of 1.2 × 10^13 cm 2 is attained in our Al2O3-based MoTe2 transistors owing to the strong gate control capa- bility, leading to a high on-state hole current of 6.1 μA μm^-1. After optimization, our Al2O3-based MoTe2 phototransistor exhibits outstanding photodetective performance, with a high responsivity of 543 AW^-1 and a high photogain of 1,662 at 405 nm light illumination, which are boosted around 419 times compared to the referential SiO2-based control devices. The mechanisms of photoconductivity in the Al2O3-based MoTe2 phototransistors have been analyzed in detail, and the photogating effect is considered to play an important role. This work may provide useful insight to improve carrier mobility in two-dimensional layered semiconductors and open opportunities to facilitate the development of high-performance photodetectors in the future.
