A two-step leaching method in combination of acid and ethylene diaminetetraacetic acid disodium （EDTA-Na2） was applied to extract metals such as Cd, Cu, Fe, Pb and Zn from a zinc smelting slag. The results show that...A two-step leaching method in combination of acid and ethylene diaminetetraacetic acid disodium （EDTA-Na2） was applied to extract metals such as Cd, Cu, Fe, Pb and Zn from a zinc smelting slag. The results show that the extraction rates of Cd, Cu, Fe and Zn in slag reach 88.3%, 54.1%, 69.6% and 54.7%, respectively, while the extraction rate of Pb is only 0.05% leached with 1.25 mol/L sulfuric acid under the conditions of the ratio of slag to liquid of 100 g/L, 65 ℃ and 120 r/min for 2 h. However, Pb extraction rate from 1.25 mol/L sulfuric acid leached residue reaches as high as 66.5% by using 0.1 mol/L EDTA-Na2 solution. The results indicate that two-step sequential extraction procedure combining 1.25 mol/L sulfuric acid and 0.1 mol/L EDTA-Na2 solution can extensively extract Cd, Cu, Fe, Pb and Zn from zinc smelting slag.展开更多
An optimized selective sequential extraction(SSE)procedure was developed to assess the arsenic(As)partitioning in copper slag.The potential As species in copper slag are partitioned into the readily soluble As,dissolv...An optimized selective sequential extraction(SSE)procedure was developed to assess the arsenic(As)partitioning in copper slag.The potential As species in copper slag are partitioned into the readily soluble As,dissolvable arsenates,sparingly soluble arsenates,As residing in sulfides,arsenopyrite and metal As,as well as As incorporated into glassy silicates.The inductively coupled plasma atomic emission spectrometry(ICP-AES),scanning electronic microscopy(SEM),transmission electron microscope(TEM),X-ray diffractometry(XRD)and Fourier transform infrared spectroscopy(FTIR)were used to characterize the leachates and residues produced from the operation scheme.The selectivity and recovery of extractants were evaluated through single-phase extraction procedures.Partitioning data of As in slag samples show good agreement with the reported works and the total As recovery of each operation is over 90%.This suggests that the optimized SEE scheme can be reliably employed for As partitioning in As-bearing byproducts from copper smelting.展开更多
基金Project(2011SK3262) supported by Science and Technology Program of Hunan Province,China
文摘A two-step leaching method in combination of acid and ethylene diaminetetraacetic acid disodium （EDTA-Na2） was applied to extract metals such as Cd, Cu, Fe, Pb and Zn from a zinc smelting slag. The results show that the extraction rates of Cd, Cu, Fe and Zn in slag reach 88.3%, 54.1%, 69.6% and 54.7%, respectively, while the extraction rate of Pb is only 0.05% leached with 1.25 mol/L sulfuric acid under the conditions of the ratio of slag to liquid of 100 g/L, 65 ℃ and 120 r/min for 2 h. However, Pb extraction rate from 1.25 mol/L sulfuric acid leached residue reaches as high as 66.5% by using 0.1 mol/L EDTA-Na2 solution. The results indicate that two-step sequential extraction procedure combining 1.25 mol/L sulfuric acid and 0.1 mol/L EDTA-Na2 solution can extensively extract Cd, Cu, Fe, Pb and Zn from zinc smelting slag.
基金Projects(51874257,51374185,51801183)supported by the National Natural Science Foundation of China。
文摘An optimized selective sequential extraction(SSE)procedure was developed to assess the arsenic(As)partitioning in copper slag.The potential As species in copper slag are partitioned into the readily soluble As,dissolvable arsenates,sparingly soluble arsenates,As residing in sulfides,arsenopyrite and metal As,as well as As incorporated into glassy silicates.The inductively coupled plasma atomic emission spectrometry(ICP-AES),scanning electronic microscopy(SEM),transmission electron microscope(TEM),X-ray diffractometry(XRD)and Fourier transform infrared spectroscopy(FTIR)were used to characterize the leachates and residues produced from the operation scheme.The selectivity and recovery of extractants were evaluated through single-phase extraction procedures.Partitioning data of As in slag samples show good agreement with the reported works and the total As recovery of each operation is over 90%.This suggests that the optimized SEE scheme can be reliably employed for As partitioning in As-bearing byproducts from copper smelting.
