Polyepoxysuccinic acid （PESA）, as an environmental benign biodegradable chelant, was used to remove heavy metals from the sewage sludge of Shanghai Taopu Wastewater Treatment Plant. The extraction of cadmium （Cd） ...Polyepoxysuccinic acid （PESA）, as an environmental benign biodegradable chelant, was used to remove heavy metals from the sewage sludge of Shanghai Taopu Wastewater Treatment Plant. The extraction of cadmium （Cd） from sewage sludge using aqueous solution of PESA was studied. It was found that PESA was capable of extracting Cd from the sludge, and the extraction efficiency was dependent on both pH and the concentration of the chelating reagent. The extraction efficiency decreased gradually with increasing of pH, whereas the dependency on pH decreased as the concentration of PESA increased. In the case of the high PESA to total metal ratio, e.g., 10：1, the extraction efficiency reached above 70% within the pH range from 1 to 7. The highest extraction efficiency obtained in tbe experiment was 78%. By comparing the contents of the heavy metals in sewage sludge before and after the extraction, it was found that the extracted Cd came mainly from the four fractions： acid-soluble, reducible, oxidizable, and water-soluble fractions.展开更多
The kinetics of reductive leaching of manganese from a low-grade manganese oxide ore were studied using cellulose as reductant in dilute sulfuric acid medium.It was found that when the stirring speed was higher than 2...The kinetics of reductive leaching of manganese from a low-grade manganese oxide ore were studied using cellulose as reductant in dilute sulfuric acid medium.It was found that when the stirring speed was higher than 200 r/min,the effect of gas film diffusion on manganese extraction efficiency could be neglected,and the kinetic behavior was investigated under the condition of elimination of external diffusion influence on the leaching process.Effects of leaching temperature,mass ratio of cellulose and ore,and the sulfuric acid concentration on manganese extraction efficiency were discussed.The kinetic data were analyzed based on the shrinking core model,which indicated that the leaching process was dominated by both ash layer diffusion and chemical reaction at the initial stage,with the progress of leaching reaction,the rate-controlling step switched to the ash layer diffusion.It was also concluded that the sulfuric acid concentration had the most significant influence on the leaching rate,the reaction orders with respect to the sulfuric acid concentration were 2.102 in the first 60 min,and 3.642 in the later 90 min,while the reaction orders for mass ratio of cellulose and ore were 0.660 and 0.724,respectively.An Arrhenius relationship was used to relate the temperature to the rate of leaching,from which apparent activation energies were calculated to be 46.487 kJ/mol and 62.290 kJ/mol at the two stages,respectively.Finally,the overall leaching rate equations for the manganese dissolution reaction with cellulose in sulphuric acid solution were developed.The morphological changes and mineralogical forms of the ore before and after the chemical treatment were discussed with the support of SEM and XRD analyses.展开更多
In this work, enhancement of the light extraction efficiency of a 590 nm AIGaInP light-emitting diodes （LED） with a reflective top electrode （RTE） was investigated. A distributed Bragg reflector （DBR）, consistin...In this work, enhancement of the light extraction efficiency of a 590 nm AIGaInP light-emitting diodes （LED） with a reflective top electrode （RTE） was investigated. A distributed Bragg reflector （DBR）, consisting of AIAs/AIGaAs pairs, grown on an AlGaInP structure was used as a reflector for a reflective top electrode. It was found that a higher output power was observed from the AIGalnP LED with a RTE than from a conventional one. In addition, it was noted that the improvement in the output power depends strongly on the reflectivity of the reflector and that it exhibits a more effective performance with low injection currents. The increase in the optical output power was attributed to the enhanced extraction efficiency caused by a reduction of light absorbed from the emission region to top electrode through the RTE.展开更多
基金Project supported by the National High Technology Research and Development Program (863 Program) of China(No.2006AA06Z384)the National Natural Science Foundation of China (No. 50478103)
文摘Polyepoxysuccinic acid （PESA）, as an environmental benign biodegradable chelant, was used to remove heavy metals from the sewage sludge of Shanghai Taopu Wastewater Treatment Plant. The extraction of cadmium （Cd） from sewage sludge using aqueous solution of PESA was studied. It was found that PESA was capable of extracting Cd from the sludge, and the extraction efficiency was dependent on both pH and the concentration of the chelating reagent. The extraction efficiency decreased gradually with increasing of pH, whereas the dependency on pH decreased as the concentration of PESA increased. In the case of the high PESA to total metal ratio, e.g., 10：1, the extraction efficiency reached above 70% within the pH range from 1 to 7. The highest extraction efficiency obtained in tbe experiment was 78%. By comparing the contents of the heavy metals in sewage sludge before and after the extraction, it was found that the extracted Cd came mainly from the four fractions： acid-soluble, reducible, oxidizable, and water-soluble fractions.
基金Project(2010FJ1011)supported by the Major Project of Science and Technology of Hunan Province,China
文摘The kinetics of reductive leaching of manganese from a low-grade manganese oxide ore were studied using cellulose as reductant in dilute sulfuric acid medium.It was found that when the stirring speed was higher than 200 r/min,the effect of gas film diffusion on manganese extraction efficiency could be neglected,and the kinetic behavior was investigated under the condition of elimination of external diffusion influence on the leaching process.Effects of leaching temperature,mass ratio of cellulose and ore,and the sulfuric acid concentration on manganese extraction efficiency were discussed.The kinetic data were analyzed based on the shrinking core model,which indicated that the leaching process was dominated by both ash layer diffusion and chemical reaction at the initial stage,with the progress of leaching reaction,the rate-controlling step switched to the ash layer diffusion.It was also concluded that the sulfuric acid concentration had the most significant influence on the leaching rate,the reaction orders with respect to the sulfuric acid concentration were 2.102 in the first 60 min,and 3.642 in the later 90 min,while the reaction orders for mass ratio of cellulose and ore were 0.660 and 0.724,respectively.An Arrhenius relationship was used to relate the temperature to the rate of leaching,from which apparent activation energies were calculated to be 46.487 kJ/mol and 62.290 kJ/mol at the two stages,respectively.Finally,the overall leaching rate equations for the manganese dissolution reaction with cellulose in sulphuric acid solution were developed.The morphological changes and mineralogical forms of the ore before and after the chemical treatment were discussed with the support of SEM and XRD analyses.
文摘In this work, enhancement of the light extraction efficiency of a 590 nm AIGaInP light-emitting diodes （LED） with a reflective top electrode （RTE） was investigated. A distributed Bragg reflector （DBR）, consisting of AIAs/AIGaAs pairs, grown on an AlGaInP structure was used as a reflector for a reflective top electrode. It was found that a higher output power was observed from the AIGalnP LED with a RTE than from a conventional one. In addition, it was noted that the improvement in the output power depends strongly on the reflectivity of the reflector and that it exhibits a more effective performance with low injection currents. The increase in the optical output power was attributed to the enhanced extraction efficiency caused by a reduction of light absorbed from the emission region to top electrode through the RTE.
