Two new techniques for efficiency-optimization control(EOC) of induction motor drives were proposed. The first method combined Loss Model and "golden section technique", which was faster than the available m...Two new techniques for efficiency-optimization control(EOC) of induction motor drives were proposed. The first method combined Loss Model and "golden section technique", which was faster than the available methods. Secondly, the low-frequency ripple torque due to decrease of rotor flux was compensated in a feedforward manner. If load torque or speed command changed, the efficiency search algorithm would be abandoned and the rated flux would be established to get the best transient response. The close agreement between the simulation and the experimental results confirmed the validity and usefulness of the proposed techniques.展开更多
PIM-SM(Protocol Independent Multicast-Sparse Mode) is a main multicast routing pro-tocol in the IPv6(Internet Protocol version 6).It can use either a shared tree or a shortest path tree to deliver data packets,consequ...PIM-SM(Protocol Independent Multicast-Sparse Mode) is a main multicast routing pro-tocol in the IPv6(Internet Protocol version 6).It can use either a shared tree or a shortest path tree to deliver data packets,consequently the multicast IP lookup engine requires,in some cases,two searches to get a correct lookup result according to its multicast forwarding rule,and it may result in a new requirement of doubling the lookup speed of the lookup engine.The ordinary method to satisfy this requirement in TCAM(Ternary Content Addressable Memory) based lookup engines is to exploit parallelism among multiple TCAMs.However,traditional parallel methods always induce more re-sources and higher design difficulty.We propose in this paper a novel approach to solve this problem.By arranging multicast forwarding table in class sequence in TCAM and making full use of the intrinsic characteristic of the TCAM,our approach can get the right lookup result with just one search and a single TCAM,while keeping the hardware of lookup engine unchanged.Experimental results have shown that the approach make it possible to satisfy forwarding IPv6 multicast packets at the full link rate of 20 Gb/s with just one TCAM with the current TCAM chip.展开更多
文摘Two new techniques for efficiency-optimization control(EOC) of induction motor drives were proposed. The first method combined Loss Model and "golden section technique", which was faster than the available methods. Secondly, the low-frequency ripple torque due to decrease of rotor flux was compensated in a feedforward manner. If load torque or speed command changed, the efficiency search algorithm would be abandoned and the rated flux would be established to get the best transient response. The close agreement between the simulation and the experimental results confirmed the validity and usefulness of the proposed techniques.
基金Supported by the National High-Tech Research and De-velopment Plan of China (No. 2007AA01Z2a1)the Na-tional Grand Fundamental Research 973 Program of China (No. 2007CB307102)
文摘PIM-SM(Protocol Independent Multicast-Sparse Mode) is a main multicast routing pro-tocol in the IPv6(Internet Protocol version 6).It can use either a shared tree or a shortest path tree to deliver data packets,consequently the multicast IP lookup engine requires,in some cases,two searches to get a correct lookup result according to its multicast forwarding rule,and it may result in a new requirement of doubling the lookup speed of the lookup engine.The ordinary method to satisfy this requirement in TCAM(Ternary Content Addressable Memory) based lookup engines is to exploit parallelism among multiple TCAMs.However,traditional parallel methods always induce more re-sources and higher design difficulty.We propose in this paper a novel approach to solve this problem.By arranging multicast forwarding table in class sequence in TCAM and making full use of the intrinsic characteristic of the TCAM,our approach can get the right lookup result with just one search and a single TCAM,while keeping the hardware of lookup engine unchanged.Experimental results have shown that the approach make it possible to satisfy forwarding IPv6 multicast packets at the full link rate of 20 Gb/s with just one TCAM with the current TCAM chip.
