In this paper, a numerical study of flow in the turbulence boundary layer with adverse and pressure gradients （APGs） is conducted by using Reynolds-averaged Navier-Stokes （RANS） equations. This research chooses si...In this paper, a numerical study of flow in the turbulence boundary layer with adverse and pressure gradients （APGs） is conducted by using Reynolds-averaged Navier-Stokes （RANS） equations. This research chooses six typical turbulence models, which are critical to the computing precision, and to evaluating the issue of APGs. Local frictional resistance coefficient is compared between numerical and experimental results. The same comparisons of dimensionless averaged velocity profiles are also performed. It is found that results generated by Wilcox （2006） k-co are most close to the experimental data. Meanwhile, turbulent quantities such as turbulent kinetic energy and Reynolds-stress are also studied.展开更多
A new kind of friction-reducing and repairing additive containing nano-scale copper and rare earth compounds were prepared by means of synthesis and compounding methods. The performance of the said additive was invest...A new kind of friction-reducing and repairing additive containing nano-scale copper and rare earth compounds were prepared by means of synthesis and compounding methods. The performance of the said additive was investigated by engine bench test, and was compared to the performance of similar domestic and imported additives. The deterioration of lube oils containing additives over different time intervals was studied by means of plasma spectrometry and mass spectrometry, and the effect of additive package on engine power was also studied. Test results have revealed that the synthetic additive package can provide good anti-wear performance to the tribo-pairs. In particular, after 300 hour application of the said additive package the connection rod shaft and copper sleeve showed 'zero wear' to achieve the in situ dynamic repairing of tribo-pairs. Application of the said synthetic additive can effectively improve the engine power performance and extend the engine service life.展开更多
High speed power chucks are important function units in high speed turning.The gripping force loss is the primary factor limiting the rotational speed of high-speed power chucks.This paper proposes a piecewise model c...High speed power chucks are important function units in high speed turning.The gripping force loss is the primary factor limiting the rotational speed of high-speed power chucks.This paper proposes a piecewise model considering the difference of wedge transmission's radial deformation between low-speed stage and medium-to-high-speed stage,the friction forces of chuck transmission,and the compressibility of hydraulic oil in rotary hydraulic cylinders.A corrected model of gripping force loss is also established for power chucks with asymmetric stiffness.The model is verified by experiment results.It is helpful to use the piecewise model to explain the experimental phenomenon that the overall loss coefficient of gripping force increases with the rotational speed increasing at medium and high speed stages.Besides,the loss coefficients of gripping force at each stage during speeding up and the critical rotational speed between two adjacent stages are discussed.For wedge power chucks with small wedge angel(α<20°) and ordinary lubrication(μ0>0.06),the local loss coefficient of gripping force at the low speed stage is about 70% of that at the medium to high speed stage.For wedge power chucks with larger wedge angel(α>20°) or low friction coefficient(μ0<0.06),the wedge transmissions cannot self-lock at high speed stage,and the gripping force loss at the high speed stage is related to the hydraulic lock and hydraulic oil in the rotary hydraulic cylinder;the local loss coefficients of gripping force at the third stage is about 1.75 to 2.13 times that at the second stage.This work is helpful to understand the mechanism of the gripping force loss thoroughly and to optimize power chucks.展开更多
基金Foundation item： Supported by the National Natural Science Foundation of China （Nos.51309040, 51379033, 51209027, 51309025）, Open Research Fund of State Key Laboratory of Ocean Engineering （Shanghai Jiao Tong University） （Grant No.1402）, and Fundamental Research Fund for the Central Universities （DMU3132015089）.
文摘In this paper, a numerical study of flow in the turbulence boundary layer with adverse and pressure gradients （APGs） is conducted by using Reynolds-averaged Navier-Stokes （RANS） equations. This research chooses six typical turbulence models, which are critical to the computing precision, and to evaluating the issue of APGs. Local frictional resistance coefficient is compared between numerical and experimental results. The same comparisons of dimensionless averaged velocity profiles are also performed. It is found that results generated by Wilcox （2006） k-co are most close to the experimental data. Meanwhile, turbulent quantities such as turbulent kinetic energy and Reynolds-stress are also studied.
文摘A new kind of friction-reducing and repairing additive containing nano-scale copper and rare earth compounds were prepared by means of synthesis and compounding methods. The performance of the said additive was investigated by engine bench test, and was compared to the performance of similar domestic and imported additives. The deterioration of lube oils containing additives over different time intervals was studied by means of plasma spectrometry and mass spectrometry, and the effect of additive package on engine power was also studied. Test results have revealed that the synthetic additive package can provide good anti-wear performance to the tribo-pairs. In particular, after 300 hour application of the said additive package the connection rod shaft and copper sleeve showed 'zero wear' to achieve the in situ dynamic repairing of tribo-pairs. Application of the said synthetic additive can effectively improve the engine power performance and extend the engine service life.
基金supported by the National Natural Science Foundation of China (Grant No. 50875234)the National Science and Technology Support Program of China (Grant No. 2006BAF01B09-7)
文摘High speed power chucks are important function units in high speed turning.The gripping force loss is the primary factor limiting the rotational speed of high-speed power chucks.This paper proposes a piecewise model considering the difference of wedge transmission's radial deformation between low-speed stage and medium-to-high-speed stage,the friction forces of chuck transmission,and the compressibility of hydraulic oil in rotary hydraulic cylinders.A corrected model of gripping force loss is also established for power chucks with asymmetric stiffness.The model is verified by experiment results.It is helpful to use the piecewise model to explain the experimental phenomenon that the overall loss coefficient of gripping force increases with the rotational speed increasing at medium and high speed stages.Besides,the loss coefficients of gripping force at each stage during speeding up and the critical rotational speed between two adjacent stages are discussed.For wedge power chucks with small wedge angel(α<20°) and ordinary lubrication(μ0>0.06),the local loss coefficient of gripping force at the low speed stage is about 70% of that at the medium to high speed stage.For wedge power chucks with larger wedge angel(α>20°) or low friction coefficient(μ0<0.06),the wedge transmissions cannot self-lock at high speed stage,and the gripping force loss at the high speed stage is related to the hydraulic lock and hydraulic oil in the rotary hydraulic cylinder;the local loss coefficients of gripping force at the third stage is about 1.75 to 2.13 times that at the second stage.This work is helpful to understand the mechanism of the gripping force loss thoroughly and to optimize power chucks.
