In order to reduce the friction coefficients and further improve the anti-wear properties of Ni-base alloy coatings reinforced by TiC particles,graphite/TiC/Ni-base alloy（GTN） coatings were prepared on the surface o...In order to reduce the friction coefficients and further improve the anti-wear properties of Ni-base alloy coatings reinforced by TiC particles,graphite/TiC/Ni-base alloy（GTN） coatings were prepared on the surface of 45 carbon steel.The effects of graphite content on the microstructure and tribological properties of the GTN coatings were investigated.The results show that the addition of graphite to the GTN coatings may greatly reduce the friction coefficients and improve their wear resistance.The 6.56GTN and 12.71GTN coatings exhibit excellent integrated properties of anti-friction and wear resistance under low and high loads,respectively.Under a low load,the wear mechanisms of the GTN coatings are mainly multi-plastic deformation with slight abrasive wear and gradually change into mixture of multi-plastic deformation,delamination and micro-cutting wear with the increase of graphite fraction.As the load increases,the main wear mechanisms gradually change from micro-cracks,micro-cutting and adhesive wear to micro-cutting and micro-fracture with the increase of graphite fraction.展开更多
The effect of the design parameter on the clutch engagement process of the hydro-mechanical continuously variable transmission(CVT)was investigated.First,the model of the power train was developed with the software of...The effect of the design parameter on the clutch engagement process of the hydro-mechanical continuously variable transmission(CVT)was investigated.First,the model of the power train was developed with the software of SimulationX,and the clutch shift experiment was used to validate the correctness of the model.Then,the friction coefficient function was fitted with the test data to get the friction coefficient model suitable for this paper.Finally,based on the evaluating index of the friction torque and the friction power,two groups of design parameters(oil pressure and friction coefficient)were simulated and explained the changing regulation theoretically.According to the simulation results,the high oil pressure and friction coefficient can reduce the slipping time.The large oil pressure can increase the peak torque but the effect of friction coefficient on the peak torque is not so significant.The friction power reaches the maximum value at 3.2 s,the peak value increases as the oil pressure and friction coefficient increase.The effect of the oil pressure on the clutch engagement and thermal performance is greater than the friction coefficient.展开更多
文摘In order to reduce the friction coefficients and further improve the anti-wear properties of Ni-base alloy coatings reinforced by TiC particles,graphite/TiC/Ni-base alloy（GTN） coatings were prepared on the surface of 45 carbon steel.The effects of graphite content on the microstructure and tribological properties of the GTN coatings were investigated.The results show that the addition of graphite to the GTN coatings may greatly reduce the friction coefficients and improve their wear resistance.The 6.56GTN and 12.71GTN coatings exhibit excellent integrated properties of anti-friction and wear resistance under low and high loads,respectively.Under a low load,the wear mechanisms of the GTN coatings are mainly multi-plastic deformation with slight abrasive wear and gradually change into mixture of multi-plastic deformation,delamination and micro-cutting wear with the increase of graphite fraction.As the load increases,the main wear mechanisms gradually change from micro-cracks,micro-cutting and adhesive wear to micro-cutting and micro-fracture with the increase of graphite fraction.
基金Project(CX(19)3081)supported by the Agricultural Science and Technology Independent Innovation Fund of Jiangsu Province,ChinaProject(BE2018127)supported by the Key Research and Development Program of Jiangsu Province,China。
文摘The effect of the design parameter on the clutch engagement process of the hydro-mechanical continuously variable transmission(CVT)was investigated.First,the model of the power train was developed with the software of SimulationX,and the clutch shift experiment was used to validate the correctness of the model.Then,the friction coefficient function was fitted with the test data to get the friction coefficient model suitable for this paper.Finally,based on the evaluating index of the friction torque and the friction power,two groups of design parameters(oil pressure and friction coefficient)were simulated and explained the changing regulation theoretically.According to the simulation results,the high oil pressure and friction coefficient can reduce the slipping time.The large oil pressure can increase the peak torque but the effect of friction coefficient on the peak torque is not so significant.The friction power reaches the maximum value at 3.2 s,the peak value increases as the oil pressure and friction coefficient increase.The effect of the oil pressure on the clutch engagement and thermal performance is greater than the friction coefficient.
