Coal roadway support is the foundation and strong guarantee of safe coal production. With the FLAC3D numerical simulation, the roadway fulllength anchor support mechanism was studied, and the full-length anchor forcet...Coal roadway support is the foundation and strong guarantee of safe coal production. With the FLAC3D numerical simulation, the roadway fulllength anchor support mechanism was studied, and the full-length anchor forcetransferring mechanism and stressfield distribution formed by roadway surrounding rocks were analyzed, which will provide a scientific basis for a support technology in large-section roadways under complicated geological conditions and lay a foundation for the popularization and application of a full-length anchor support system under special geological conditions.展开更多
Based on the boundary support conditions of overlying high-position,hard and thick strata,a Winkler foundation beam mechanical model was built.Computational expressions for the characteristics and position of the bend...Based on the boundary support conditions of overlying high-position,hard and thick strata,a Winkler foundation beam mechanical model was built.Computational expressions for the characteristics and position of the bending moment for high-position,hard and thick strata were constructed by theoretical analysis,and the initial breaking position of high-position,hard and thick strata was also analyzed.The breaking process and evolution law of mining stress in high-position,hard and thick strata were studied by similar material simulation tests.Studies show that:due to the foundation deformation effect of the lower strata,the initial break position in high-position,hard thick layers is in the middle of goaf;vertical tension fractures first occur under the middle surface,then tilt tension fractures form at both sides and a non-uniform thickness of the fracture structure forms and produces subsidence deformation;behind the coal wall tilt fractures extend and eventually complete the migration.Mining stress produces obvious changes before and after the breakage of the high,hard and thick stratum;high stress concentration forms in front of the coal wall before breakage and fracture stress concentration significantly reduces after migration.Coal seam mining under high-position,hard thick strata can easily induce dynamic phenomena.展开更多
Color information plays a key role in the research fields of object recognition and image retrieval. However, the actual color varies by the conditions of illumination, especially the open natural daylight. Four diffe...Color information plays a key role in the research fields of object recognition and image retrieval. However, the actual color varies by the conditions of illumination, especially the open natural daylight. Four different color constancy schemes are proposed in the paper to minimize the effects of open illumination conditions. (1) The color constancy scheme based on the image statistics is proposed, which includes the color cast detection and removal. (2) The color constancy scheme based on the color temperature curve is proposed, which combines Gaussian model with linear fitting to estimate color temperature curve. (3) The color constancy scheme based on the double exposure theory is proposed, which is able to reproduce a color image under typical illumination. (4) According to the concepts of supervised learning, the supervised color constancy scheme is proposed. The transformation of color values from unknown illumination to typical illumination is solved by improved Support Vector Regression (SVR).展开更多
A model to describe the main features of conjugated polymers with ring structures, such as polythiophene and polypyrrole, is constructed. It is shown that the origin of the symmetry breaking and confinement of a solit...A model to describe the main features of conjugated polymers with ring structures, such as polythiophene and polypyrrole, is constructed. It is shown that the origin of the symmetry breaking and confinement of a soliton and anti-soliton pair is branch hopping in the polymer rings.展开更多
The laminated overburden model(La Model)has been widely used for pillar design and stability analysis.As a boundary element program,the La Model program is sensitive to the boundary condition,which should be considere...The laminated overburden model(La Model)has been widely used for pillar design and stability analysis.As a boundary element program,the La Model program is sensitive to the boundary condition,which should be considered before creating the model.To eliminate the boundary effect in a La Model pillar stability analysis,a suitable boundary buffer zone is needed around the model edge.The radius of influence(R)and the abutment load extent(D)are two major factors that affect the stresses and displacements calculated in LaM odel.To determine the optimum buffer zone extent,a database of case histories was analyzed using the La Model program.Values for R and D were varied until a buffer zone having negligible influence on the pillar stability factor(SF)of the active mining zone(AMZ)was determined.展开更多
The methods combined by test, field monitoring and theoretical analysis were adopted to do the systemic research on the rock mass from micro-structure to macro-deformation, and rheological model of Jinchuan rock mass ...The methods combined by test, field monitoring and theoretical analysis were adopted to do the systemic research on the rock mass from micro-structure to macro-deformation, and rheological model of Jinchuan rock mass was established to discuss the reasonable supporting time. Resuhs show that supporting after suitable stress and displacement release can benefit for the long-term stability of surrounding rock.展开更多
The mission of the test field is to provide technical support to associates. The paper present the development of OE （ocean energy） field in China and outline the new technologies and best practice, resources condit...The mission of the test field is to provide technical support to associates. The paper present the development of OE （ocean energy） field in China and outline the new technologies and best practice, resources conditions, construction targets, generation device testing and standard system. The main purpose is to improve the level of China＇s ocean energy development. The Chinese ocean energy test field, which was started in 2008, involved a development divided in three phases （the overall design, construction, demonstration）. The methodology followed in the individual phases is described, and the standardization of testing wave and tidal current energy devices is introduced. The research revealed the development and the shortage of ocean energy technology in China.展开更多
A k-regular spanning subgraph of graph G is called a k-factor of G. Graph G is called a k-deleted graph if G-e has a k-factor for each edge e. A graph G=(X,Y) with bipartition (X,Y) is called a bipartite graph if ever...A k-regular spanning subgraph of graph G is called a k-factor of G. Graph G is called a k-deleted graph if G-e has a k-factor for each edge e. A graph G=(X,Y) with bipartition (X,Y) is called a bipartite graph if every edge of G has one endpoint in X and the other in Y.It is proved that a bipartite graph G=(X,Y) with X=Y is a k-deleted graph if and only if kS≤r 1+2r 2+...+k(r k+...+r Δ)-ε(S) for all SX. Using this result we give a sufficient neighborhood condition for a bipartite to be a k-deleted graph.展开更多
A method of B-spline transform for signal feature extraction is developed. With the B-spline, the log-signal space is mapped into the vector space. An efficient algorithm based on Support Vector Machine (SVM ) to auto...A method of B-spline transform for signal feature extraction is developed. With the B-spline, the log-signal space is mapped into the vector space. An efficient algorithm based on Support Vector Machine (SVM ) to automatically identify the water-flooded status of oil-saturated stratum is described. The experiments show that this algorithm can improve the performances for the identification and the generalization in the case of a limited set of samples.展开更多
A heat exchanger that arranges flat tubes horizontally has a vertical header that distributes the refrigerant to each tube. When the heat exchanger works as an evaporator, differences in flow conditions at each branch...A heat exchanger that arranges flat tubes horizontally has a vertical header that distributes the refrigerant to each tube. When the heat exchanger works as an evaporator, differences in flow conditions at each branch, such as the ratio and distribution of vapor and liquid, due to the differences in densities and momentums of vapor and liquid in the two-phase flow make equal distribution difficult. This paper describes the distribution characteristics of a four-branch header that has a rectangular cross-section without the internal protrusion of flat tubes in the case of the inflow of the refrigerant R32 from the bottom of the header by using an equipment that can estimate the distribution ratio of the liquid and vapor phase to each branch. This paper also discusses the distribution characteristics on the basis of the flow visualization in the header. The flow visualization shows that a liquid level that contains vapor phase exists in the header and affects the distribution greatly.展开更多
For the engineering geology conditions of bad mine roadway roof and floor lithology in extremely weak cemented strata, the best section shape of the roadway is determined from the study of tunnel surrounding rock disp...For the engineering geology conditions of bad mine roadway roof and floor lithology in extremely weak cemented strata, the best section shape of the roadway is determined from the study of tunnel surrounding rock displacement, plastic zone and stress distribution in rectangular, circle arch and arch wall sections, respectively. Based on the mining depth and thickness of the coal seam, roadway support technology solutions with different buried depth and thickness of coal seam are proposed. Support schemes are amended and optimized in time through monitoring data of the deformation of roadway, roof separation, l-beam bracket, bolt and anchor cable force to ensure the long-term stability and security of the roadway surrounding rock and support structure. The monitoring results show that mine roadway support schemes for different buried depth and section can be adapted to the characteristics of ground pressure and deformation of the surrounding rock in different depth well, effectively control the roadway surrounding rock deformation and the floor heave and guarantee the safety of construction and basic stability of surrounding rock and support structure.展开更多
Groundwater extraction is used to alleviate drought in many habitats. However, widespread drought decreases spring discharge and there is a need to integrate climate change research into resource management and action...Groundwater extraction is used to alleviate drought in many habitats. However, widespread drought decreases spring discharge and there is a need to integrate climate change research into resource management and action. Accurate estimates of groundwater discharge may be valuable in improving decision support systems of hydrogeological resource exploitation. The present study performs a forecast for groundwater discharge in Aquifer?s Cervialto Mountains(southern Italy). A time series starting in 1883 was the basis for longterm predictions. An Ensemble Discharge Prediction(EDis P) was applied, and the progress of the discharge ensemble forecast was inferred with the aid of an Exponential Smoothing(ES) model initialized at different annual times. EDisP-ES hindcast model experiments were tested, and discharge plume-patterns forecast was assessed with horizon placed in the year 2044. A 46-year cycle pattern was identified by comparing simulations and observations, which is essential for the forecasting purpose. ED is P-ES performed an ensemble mean path for the coming decades that indicates a discharge regime within ± 1 standard deviation around the mean value of 4.1 m^3 s^(-1). These fluctuations are comparable with those observed in the period 1961-1980 and further back, with changepoints detectable around the years 2025 and 2035. Temporary drought conditions are expected after the year 2030.展开更多
基金Supported bythe National Natural Science Foundation of China （50904024） the State Key Laboratory Research Fund of Coal Resources and Mine Safety of China University of Mining ＆ Technology （10KF02） the Doctoral Fund of Henan Polytechnic University （B2009-66）
文摘Coal roadway support is the foundation and strong guarantee of safe coal production. With the FLAC3D numerical simulation, the roadway fulllength anchor support mechanism was studied, and the full-length anchor forcetransferring mechanism and stressfield distribution formed by roadway surrounding rocks were analyzed, which will provide a scientific basis for a support technology in large-section roadways under complicated geological conditions and lay a foundation for the popularization and application of a full-length anchor support system under special geological conditions.
基金financially supported by the National Natural Science Foundation of China (No.51374139)the Natural Science Foundation of Shandong Province (No.ZR2013EEM018)the Scientific Research Innovation Team Support Plan of Shandong University of Science and Technology
文摘Based on the boundary support conditions of overlying high-position,hard and thick strata,a Winkler foundation beam mechanical model was built.Computational expressions for the characteristics and position of the bending moment for high-position,hard and thick strata were constructed by theoretical analysis,and the initial breaking position of high-position,hard and thick strata was also analyzed.The breaking process and evolution law of mining stress in high-position,hard and thick strata were studied by similar material simulation tests.Studies show that:due to the foundation deformation effect of the lower strata,the initial break position in high-position,hard thick layers is in the middle of goaf;vertical tension fractures first occur under the middle surface,then tilt tension fractures form at both sides and a non-uniform thickness of the fracture structure forms and produces subsidence deformation;behind the coal wall tilt fractures extend and eventually complete the migration.Mining stress produces obvious changes before and after the breakage of the high,hard and thick stratum;high stress concentration forms in front of the coal wall before breakage and fracture stress concentration significantly reduces after migration.Coal seam mining under high-position,hard thick strata can easily induce dynamic phenomena.
基金Supported by the National Natural Science Foundation of China (No.60431020)the Natural Science Foundation of Beijing (No.3052005)the Ph.D. Foundation of Ministry of Education (No.20040005015)
文摘Color information plays a key role in the research fields of object recognition and image retrieval. However, the actual color varies by the conditions of illumination, especially the open natural daylight. Four different color constancy schemes are proposed in the paper to minimize the effects of open illumination conditions. (1) The color constancy scheme based on the image statistics is proposed, which includes the color cast detection and removal. (2) The color constancy scheme based on the color temperature curve is proposed, which combines Gaussian model with linear fitting to estimate color temperature curve. (3) The color constancy scheme based on the double exposure theory is proposed, which is able to reproduce a color image under typical illumination. (4) According to the concepts of supervised learning, the supervised color constancy scheme is proposed. The transformation of color values from unknown illumination to typical illumination is solved by improved Support Vector Regression (SVR).
基金The project supported by National Natural Science Foundation of China under Grant Nos. 20674010 and 90403110, the Doctoral Foundation of the Education Ministry of China, and the U,S, Army Research 0ffice under Contract W911NF-04-1-0383
文摘A model to describe the main features of conjugated polymers with ring structures, such as polythiophene and polypyrrole, is constructed. It is shown that the origin of the symmetry breaking and confinement of a soliton and anti-soliton pair is branch hopping in the polymer rings.
文摘The laminated overburden model(La Model)has been widely used for pillar design and stability analysis.As a boundary element program,the La Model program is sensitive to the boundary condition,which should be considered before creating the model.To eliminate the boundary effect in a La Model pillar stability analysis,a suitable boundary buffer zone is needed around the model edge.The radius of influence(R)and the abutment load extent(D)are two major factors that affect the stresses and displacements calculated in LaM odel.To determine the optimum buffer zone extent,a database of case histories was analyzed using the La Model program.Values for R and D were varied until a buffer zone having negligible influence on the pillar stability factor(SF)of the active mining zone(AMZ)was determined.
文摘The methods combined by test, field monitoring and theoretical analysis were adopted to do the systemic research on the rock mass from micro-structure to macro-deformation, and rheological model of Jinchuan rock mass was established to discuss the reasonable supporting time. Resuhs show that supporting after suitable stress and displacement release can benefit for the long-term stability of surrounding rock.
文摘The mission of the test field is to provide technical support to associates. The paper present the development of OE （ocean energy） field in China and outline the new technologies and best practice, resources conditions, construction targets, generation device testing and standard system. The main purpose is to improve the level of China＇s ocean energy development. The Chinese ocean energy test field, which was started in 2008, involved a development divided in three phases （the overall design, construction, demonstration）. The methodology followed in the individual phases is described, and the standardization of testing wave and tidal current energy devices is introduced. The research revealed the development and the shortage of ocean energy technology in China.
文摘A k-regular spanning subgraph of graph G is called a k-factor of G. Graph G is called a k-deleted graph if G-e has a k-factor for each edge e. A graph G=(X,Y) with bipartition (X,Y) is called a bipartite graph if every edge of G has one endpoint in X and the other in Y.It is proved that a bipartite graph G=(X,Y) with X=Y is a k-deleted graph if and only if kS≤r 1+2r 2+...+k(r k+...+r Δ)-ε(S) for all SX. Using this result we give a sufficient neighborhood condition for a bipartite to be a k-deleted graph.
基金Supported by the Natural Science Foundation of Heilong- jiang Province (No.F01-20).
文摘A method of B-spline transform for signal feature extraction is developed. With the B-spline, the log-signal space is mapped into the vector space. An efficient algorithm based on Support Vector Machine (SVM ) to automatically identify the water-flooded status of oil-saturated stratum is described. The experiments show that this algorithm can improve the performances for the identification and the generalization in the case of a limited set of samples.
文摘A heat exchanger that arranges flat tubes horizontally has a vertical header that distributes the refrigerant to each tube. When the heat exchanger works as an evaporator, differences in flow conditions at each branch, such as the ratio and distribution of vapor and liquid, due to the differences in densities and momentums of vapor and liquid in the two-phase flow make equal distribution difficult. This paper describes the distribution characteristics of a four-branch header that has a rectangular cross-section without the internal protrusion of flat tubes in the case of the inflow of the refrigerant R32 from the bottom of the header by using an equipment that can estimate the distribution ratio of the liquid and vapor phase to each branch. This paper also discusses the distribution characteristics on the basis of the flow visualization in the header. The flow visualization shows that a liquid level that contains vapor phase exists in the header and affects the distribution greatly.
基金Financial support for this work, provided by the Major Program of the National Natural Science Foundation of China (Nos. 51174196 and 51204168)the Program for New Century Excellent Talents in University by Ministry of Education of China (No. NCET-07-0519)
文摘For the engineering geology conditions of bad mine roadway roof and floor lithology in extremely weak cemented strata, the best section shape of the roadway is determined from the study of tunnel surrounding rock displacement, plastic zone and stress distribution in rectangular, circle arch and arch wall sections, respectively. Based on the mining depth and thickness of the coal seam, roadway support technology solutions with different buried depth and thickness of coal seam are proposed. Support schemes are amended and optimized in time through monitoring data of the deformation of roadway, roof separation, l-beam bracket, bolt and anchor cable force to ensure the long-term stability and security of the roadway surrounding rock and support structure. The monitoring results show that mine roadway support schemes for different buried depth and section can be adapted to the characteristics of ground pressure and deformation of the surrounding rock in different depth well, effectively control the roadway surrounding rock deformation and the floor heave and guarantee the safety of construction and basic stability of surrounding rock and support structure.
文摘Groundwater extraction is used to alleviate drought in many habitats. However, widespread drought decreases spring discharge and there is a need to integrate climate change research into resource management and action. Accurate estimates of groundwater discharge may be valuable in improving decision support systems of hydrogeological resource exploitation. The present study performs a forecast for groundwater discharge in Aquifer?s Cervialto Mountains(southern Italy). A time series starting in 1883 was the basis for longterm predictions. An Ensemble Discharge Prediction(EDis P) was applied, and the progress of the discharge ensemble forecast was inferred with the aid of an Exponential Smoothing(ES) model initialized at different annual times. EDisP-ES hindcast model experiments were tested, and discharge plume-patterns forecast was assessed with horizon placed in the year 2044. A 46-year cycle pattern was identified by comparing simulations and observations, which is essential for the forecasting purpose. ED is P-ES performed an ensemble mean path for the coming decades that indicates a discharge regime within ± 1 standard deviation around the mean value of 4.1 m^3 s^(-1). These fluctuations are comparable with those observed in the period 1961-1980 and further back, with changepoints detectable around the years 2025 and 2035. Temporary drought conditions are expected after the year 2030.
