收回非法流失于国外之文物的法律方法

我国有大量文物非法流失于海外，我们应重视运用法律方法收回我非法流失于海外的文物。本文简要介绍了五种收回经非法渠道流失的文物的方法．即在外国法院起诉机制、联合国教科文组织公约机制、联合国教科文组织政府间委员会机制、双边协议机制和罗马公约仲裁机制。本文最后指出．在收回经非法渠道流失的文物问题上．单纯依靠相关法律机制有时是不够的。

Recycling of industrial waste and performance of steel slag green concrete

Workability and mechanical properties of steel slag green concrete with different types of steel slag and different dosages of admixtures were investigated. The effectiveness of steel slag powder on suppressing alkali aggregate reaction(AAR) expansion was assessed using the method of ASTM C441 and accelerated test method. Experimental results show that mechanical properties can be improved further due to the synergistic effect and mutual activation when compound mineral admixtures with steel slag powder and blast-furnace slag powder are mixed into concrete. In addition,about 50% decrease in expansion rate of mortar bars with mineral admixtures can be achieved in AAR tests. Mineral admixtures with steel slag powder as partial replacement for Portland cement in concrete is an effective means for controlling expansion due to AAR.

A Retrievable Data Perturbation Method Used in Privacy-Preserving in Cloud Computing

With the increasing popularity of cloud computing,privacy has become one of the key problem in cloud security.When data is outsourced to the cloud,for data owners,they need to ensure the security of their privacy;for cloud service providers,they need some information of the data to provide high QoS services;and for authorized users,they need to access to the true value of data.The existing privacy-preserving methods can't meet all the needs of the three parties at the same time.To address this issue,we propose a retrievable data perturbation method and use it in the privacy-preserving in data outsourcing in cloud computing.Our scheme comes in four steps.Firstly,an improved random generator is proposed to generate an accurate "noise".Next,a perturbation algorithm is introduced to add noise to the original data.By doing this,the privacy information is hidden,but the mean and covariance of data which the service providers may need remain unchanged.Then,a retrieval algorithm is proposed to get the original data back from the perturbed data.Finally,we combine the retrievable perturbation with the access control process to ensure only the authorized users can retrieve the original data.The experiments show that our scheme perturbs date correctly,efficiently,and securely.

Cleaner Production Assessment in Textile Industry

Cleaner Production focuses on environmental improvement with economic benefits. Based on the benefit assessment home and abroad, the assessment method and process in textile industry is discussed, including maneuverable indicator system, mathematics model. According to corresponding principles of Cleaner Production, representative problems are mentioned. With Analytic Hierarchy Process and Fuzzy Mathematics, some enterprise is collected to attain the economic, environmental and social benefit of Cleaner Production. The results show that Cleaner Production improves utilization efficiency of resources, energy sources even waste, and creates conditions of Sustainable Development in textile industry.

From Rubbish to a Large Scale Industry： A Simple Fabrication of Superfiber with Multitasking Applications

In the whole earth, people increased dramatically from generation to generation which had created a large scale of broken environment so that people are facing more various types of garbage. Most of garbages are not useful and as a matter of fact, they are used to be neglected. Furthermore, many efforts have been conducted to change it by many types of recycled methods. Here, a simple technique is proposed with and without using fires to transform the useless natural or man-made rubbish things to be a superfiber as well as thin film with multitasking applications in human daily life. Since most of earth environment is covered by oceans, here the authors show how the ocean related garbage such as the crab skins, broken coral reefs and beach stones were changed to be superfiber and a multitasking device prototype.

Dechlorination of zinc dross by microwave roasting

Traditional treatments of zinc dross have many disadvantages,such as complicated recovering process and serious environmental pollution.In this work,a new process of chlorine removal from zinc dross by microwave was proposed for solving problem of recycling the zinc dross.With better ability of absorbing the microwave than zinc oxide,the main material in zinc dross,chlorides,can be heated and evaporated rapidly during microwave roasting.Various parameters including roasting temperature,duration time and stirring speed were optimized.The microstructure of roasted materials was characterized by X-ray diffraction(XRD) and scanning electron microscope(SEM).The content of the chloride was analyzed by the method of chlorine ion selective electrode.The experiments indicate that the best duration time is 60 min with a stirring speed of 15 r/min during the microwave roasting process.The dechlorination rate reaches peak value of 88% at 700 ℃.The chlorine is removed as HCl gas when water vapor is used as activating agent,which means that it can be recovered into hydrochloride acid.

Unified Model of Purification Units in Hydrogen Networks

Purification processes are widely used in hydrogen networks of refineries to increase hydrogen reuse. In refineries, hydrogen purification techniques include hydrocarbon, hydrogen sulfide and CO removal units. In addition, light hydrocarbon recovery from the hydrogen source streams can also result in hydrogen purification. In order to simplify the superstructure and mathematical model of hydrogen network integration, the models of different purification processes are unified in this paper, including mass balance and the expressions for hydrogen recovery and impurity removal ratios, which are given for all the purification units in refineries. Based on the proposed unified model, a superstructure of hydrogen networks with purification processes is constructed.

Optimal control of cobalt crust seabedmining parameters based on simulated annealing genetic algorithm

Under the condition of the designated collection ratio and the interfused ratio of mullock, to ensure the least energy consumption, the parameters of collecting head （the feed speed, the axes height of collecting head, and the rotate speed） are chosen as the optimized parameters. According to the force on the cutting pick, the collecting size of the cobalt crust and bedrock and the optimized energy consumption of the collecting head, the optimized design model of collecting head is built. Taking two hundred groups seabed microtopography for grand in the range of depth displacement from 4.5 to 5.5 era, then making use of the improved simulated annealing genetic algorithm （SAGA）, the corresponding optimized result can be obtained. At the same time, in order to speed up the controlling of collecting head, the optimization results are analyzed using the regression analysis method, and the conclusion of the second parameter of the seabed microtopography is drawn.

Comparative analysis of methods for concentrating venom from jellyfish Rhopilema esculentum Kishinouye

In this study, several methods were compared for the efficiency to concentrate venom from the tentacles of jellyfish Rhopilema esculentum Kishinouye. The results show that the methods using either freezing-dry or gel absorption to remove water to concentrate venom are not applicable due to the low concentration of the compounds dissolved. Although the recovery efficiency and the total venom obtained using the dialysis dehydration method are high, some proteins can be lost during the concentrating process. Comparing to the lyophilization method, ultrafiltration is a simple way to concentrate the compounds at high percentage but the hemolytic activities of the proteins obtained by ultrafiltration appear to be lower. Our results suggest that overall lyophilization is the best and recommended method to concentrate venom from the tentacles of jellyfish. It shows not only the high recovery efficiency for the venoms but high hemolytic activities as well.

Precise Transceiver-Free Localization in Complex Indoor Environment

Transceiver-free object localization can localize target through using Radio Frequency(RF) technologies without carrying any device, which attracts many researchers' attentions. Most traditional technologies usually first deploy a number of reference nodes which are able to communicate with each other, then select only some wireless links, whose signals are affected the most by the transceiver-free target, to estimate the target position. However, such traditional technologies adopt an ideal model for the target, the other link information and environment interference behavior are not considered comprehensively. In order to overcome this drawback, we propose a method which is able to precisely estimate the transceiver-free target position. It not only can leverage more link information, but also take environmental interference into account. Two algorithms are proposed in our system, one is Best K-Nearest Neighbor(KNN) algorithm, the other is Support Vector Regression(SVR) algorithm. Our experiments are based on Telos B sensor nodes and performed in different complex lab areas which have many different furniture and equipment. The experiment results show that the average localization error is round 1.1m. Compared with traditional methods, the localization accuracy is increased nearly two times.

Evaluation of Greenhouse Gas Emissions from and the Economic Efficiency of the ＂Hita City Biomass Recycle Center＂

Many biomass recycling facilities have been established in Japan, but its environmental efficiencies have been studied little. MIC has stated that these facilities do not work as well as expected. The environmental and economic efficiencies ofa biomass recycling center （representative of other recycling facilities） in Hita city are assessed here. The center was built to decrease the amount of waste needing to be disposed of, and is unusual in that it generates electricity using the methane produced. Electricity produced from biomass sells at a higher price than electricity sold by electricity companies in Japan, and this strongly affects the recycling center operation. The environmental efficiency of the recycling center was assessed using a lifecycle assessment method, and the economic efficiency was assessed from the amounts of greenhouse gases emitted and the running costs. As the result, it was clear that the recycling center emits about 20% of the greenhouse gases that were previously emitted. Treating biomass at the recycling center costs 1,356 yen per ton of biomass throughout the year. In conclusion, the recycling center decreases the environmental footprint of Hita city. The cost of decreasing greenhouse gas emissions is about 1,400 yen per ton of biomass.

Condensing Heat Exchanger

The paper shows a method of designing a heat exchanger recovering heat from the condensation of water vapour contained in flue gases. A heat exchanger condenses water vapour and SO2 （sulphur dioxide） in the presence of inert gases （CO2, CO, N2, O2） contained in flue gases. A mathematical model and a sample design of a heat exchanger were presented. The heat exchange is capable of recovering from a dozen or so to several dozen percent of heat from flue gases escaping into the atmosphere. A second advantage of the heat exchanger is the possibility to reduce the emissions of SO2 considerably. Depending on the parameters, it can be even a sevenfold reduction in the emissions. The main mathematical tool used for designing the condensing heat exchanger is the Colburn-Hougen method. The authors omitted that part of the method which requires iterative calculations. The Mollier diagram was used instead.

Pointwise Convergence of a Nonparametric Estimator of Regression in a Measurable Space Used in Contingent Valuation Method

The Contingent Valuation Method is used to evaluate individual preferences for a change concerning a public non-market resource or property. The objective is to build a nonparametric forecasting model of an individual＇s Willingness To Pay according to geographical location. Within this framework, an estimator （of type Nadaraya-Watson） is proposed for the regression of the variable related to geolocation. The specific characteristics of the location variable lead us to a more general regression model than the traditional models. Results are established for convergence of our estimator.

Effects of pulse flow and leading edge sweep on mixed flow turbines for engine exhaust heat recovery

Recovery of heat energy from internal combustion engine exhaust will achieve significant road transportation CO2 reduction. Turbocharging and turbogenerating are most commonly used technologies to recover engine exhaust heat energy.Engine exhaust pulse flow can significantly affect the turbine performance of turbocharging and turbogenerating systems,and it is necessary to consider the pulse flow effects in turbine design and performance analysis.An investigation was carried out by numerical simulation on the mixed flow turbine pulse flow performance and flow fields.Results showed that the variations of the turbine efficiency and flowfiled under pulsating flow conditions demonstrate significant unsteady effects.The effect of blade leading edge sweep on turbine pulse flow performance was studied.It is shown that increasing of the leading edge sweep angle can improve the turbine average instantaneous efficiency by about 2 percent under pulsating flow conditions.