钢丝热镀锌全集成自动化控制系统设计

针对钢丝热镀锌的生产工艺要求,提出利用西门子PLC和触摸屏对钢丝热镀锌的生产工艺进行全集成自动化改造,实现对退火炉和镀锌炉的温度控制和氧气含量检测,收线机组的速度及计米统计控制,并利用触摸屏和上位机Win CC组态实现人机交互控制。实践证明该系统运行稳定,能够保证控制系统正常运行。

Distributed Power Control Based on Linear Quadratic Optimal Controller for Cognitive Radio Network

We propose a distributed closedloop power control scheme for a cognitive radio network(CRN) based on our developed state space model of the CRN. The whole power control process is separated into outer control loop and inner control loop in order to solve different problem. In outer loop, the interference temperature(IT) constraint is transformed to a performance index minimized by a state feedback controller to obtain an appropriate target signal to interference plus noise ratio(SINR) of secondary user(SU). For ideal channel model and random time-varying channel model, our designed controller is a linear quadratic regulator(LQR) and a linear quadratic Gaussian(LQG) regulator respectively. While in inner loop, SU controls its transmit power to make the instantaneous SINR track the corresponding target and ensure the IT constraint under the limited threshold. The closed-loop stability of the CRN is proved and the performance of proposed control scheme is presented by computer simulations, which shows that this scheme can effectively guarantee both the requirement of SINR and IT constraint for all SUs.

Bilevel linear programming model of charging for effluent based on price control

For the optimum price problem of charging for effluent, this paper analyzes the optimal Pigovian Tax and the serious information asymmetry problem existing in the application process of optimal Pigovian Tax, which is predominant in theory. Then the bilevel system optimizing decision-making theory is applied to give bilevel linear programming decision-making model of charging for effluent, in which the government (environmental protection agency) acts as the upper level decision-making unit and the polluting enterprises act as the lower level decision-making unit. To some extent, the model avoids the serious information asymmetry between the government and the polluting enterprises on charging for effluent.

Research on CMOS Mm-Wave Circuits and Systems for Wireless Communications

This paper lenges in the design of discusses some chal- millimeter-wave （mln- wave） circuits and systems for 5th generation （5G） wireless systems in CMOS process. The properties of some passive and active devices such as inductors, capacitors, transmission lines, translbrmers and transistors in mm-wave frequency band are discussed. Self-healing technique dealing with PVT variation, res- onant mode switching technique to enhance frequency tuning range of voltage controlled oscillator （VCO） and dual mode technique for power amplifier （PA） efficiency enhancement are introduced. At last, A fully-integrated 60 GHz 5 Gb/s QPSK transceiver with the transmit/receive （T/R） switch in 65nm CMOS process is introduced. The measured error vector magnitude （EVM） of the TX is -21.9 dB while the bit error rate （BER） of the RX with a -52 dBm sine-wave input is below 8e-7 when transmitting/receiving 5 Gb/s data. The transceiver is powered by 1.0 V and 1.2 V supply （except the phase-frequency detector and charge-pump in the frequency synthesizer which are powered by 2.5 V supply） and con- sumes 135 mW in TX mode and 176 mW in RX mode.

Course-keeping control of underactuated hovercraft

The course-keeping control of underactuated hovercraft with two aft propellers was considered. The control of the heading error and cross-track error was accomplished by the yaw torque merely in this case. The hovercraft dynamic model is nonlinear and underactuated. At first the Controllability of course-keeping control for hovercraft was proved, then a course-keeping control law was derived that keeps hovercraft heading constant as well as minimizes the lateral movement of hovercraft. The proposed law guarantees heading error and sway error all converge to zero exponentially. Simulation tests were carried out to illustrate the effectiveness of the proposed control law. For further research, the disturbance influence would be considered in the dynamic equations.

Industrial Equipment Troubleshooting with Imaging Technique Improved Gamma-Ray Absorption Scans

Gamma scanning is one of the most common nuclear techniques on troubleshooting industrial equipments like distillation columns and reactors. With a very simple concept, the technique is easy to implement. Searching for a competitive edge the industry has been long developing solutions to achieve better results. On the last decades, significant development has been done with the advent of new equipments, electronics, portable computers and software. Continuous scanning and wireless detection systems are examples of successful field solutions, while new software aid on reporting and data presentation. However the type and quality of the results itself has not dramatically changed since its beginning. A scan profile is simple to understand, although the process to build it can be very complex as it requires a specific blend of knowledge and abilities. Process engineering, chemical engineering, internal hydraulic project, nuclear engineering and field abilities are pre requisites for of any scan specialist. Correct data gathering, interpretation and reporting are abilities often difficult to match or requires a long time of training. The industry faces a similar difficult on the customer side, as it is always necessary to train end users to understand a report and how to use its best. This paper describes our effort on developing a new approach on the gamma scan test using image reconstruction techniques that would result on a graphic image rather than a XY plot. Direct and easier to understand, a report with graphic images would be also be accessible to a wider audience, not limited to the customers experienced with gamma scan interpretation.

Convergence Analysis and Its Application in the Fixed Point Formulation of Medium Access in Wireless Network

In the Internet of things, it is of critical importance to fully utilize the potential capacity of the network with efficient medium access control （MAC） mechanisms. In this paper, we study the convergence property of the fixed point formulation of distributed coordination function （DCF）, which is widely used for medium access control in wireless networks. We first Kind that the fixed point could be repelling, which means that it is impossible for an MAC system to converge at its fixed point. Next, we show the existence of periodic points to prove that the fixed point function will oscillate between two periodic points when the fixed point is repelling. We also find that the average of the two periodic points is a close approximation of the fixed point. Based on the findings, we propose an algorithm to compute the fixed point efficiently. Simulation results verify the accuracy and efficiency of our algorithm compared with the previous fixed point computing method.

Analysis of transmitter-side control methods in wireless EV charging systems

The wireless electric vehicle(EV) charging system is highly safe and flexible. To reduce the weight and cost of EVs, the wireless charging system, which simplifies the structure inside an EV and utilizes the transmitter-side control method, has become popular. This study investigates the transmitter-side control methods in a wireless EV charging system. First, a universal wireless charging system is introduced, and the function of its transfer power is derived. It is observed that the transfer power can be controlled by regulating either the phase-shift angle or the DC-link voltage. Further, the influence of the control variables is studied using numerical analysis. Additionally, the corresponding control methods, namely the phase-shift angle and the DC-link voltage control, are compared by calculation and simulation. It is found that:(1) the system efficiency is low with the phase-shift control method because of the converter switching loss;(2) the dynamic response is slow with the DC-link voltage control method because of the large inertia of the inductor and capacitor;(3) both the control methods have limitations in their adjustable power range. Therefore, a combined control method is proposed, with the advantages of high system efficiency, fast dynamic response, and wide adjustable power range. Finally, experiments are performed to verify the validity of the theoretical analysis and the effectiveness of the proposed method. This study provides a detailed and comprehensive analysis of the transmitter-side control methods in the wireless charging system, considering the sensitivity of parameters, converter losses, system efficiency,and dynamic performance, with the dead-time effect taken into consideration. Moreover, the proposed control method can be used to realize the optimal combination of the phase-shift angle and the DC-link voltage with good dynamic performance, and it is useful for the optimal operation of the wireless charging system.