The pavement performance of epoxy resin modified asphalt mixtures was investigated by the Marshall test, the indirect tensile test, the rutting test, the three-pointed bending test and the composite beam fatigue test....The pavement performance of epoxy resin modified asphalt mixtures was investigated by the Marshall test, the indirect tensile test, the rutting test, the three-pointed bending test and the composite beam fatigue test. In comparison with the performance of epoxy resin modified asphalt mixtures, the performance of stone matrix asphalt mixtures （SMA10） was also investigated. The rutting test and composite beam fatigue test results show that the epoxy resin modified asphalt mixtures can improve permanent deformation and fatigue characteristics. They also show lower temperature susceptibility and greater resistance to moisture damage compared to the SMA10. Findings from the research indicate that the epoxy resin modified asphalt mixture provides an optional material for the pavement of long-span steel bridges in China due to profound performance and economic advantages.展开更多
Based on the analysis of the main failures discovered in pavement on steel deck plate and the demanding service condition of the pavement on steel deck, high-temperature rutting test, low-temperature bending test and ...Based on the analysis of the main failures discovered in pavement on steel deck plate and the demanding service condition of the pavement on steel deck, high-temperature rutting test, low-temperature bending test and controlled stress flexural fatigue test are used to study the performance of asphalt mixtures modified by epoxy resin including high-temperature stability, low-temperature cracking-resistance, and fatigue cracking-resistance, which are served to evaluate the modification effect of epoxy resin of different contents. With the addition of epoxy resin, all the three performances are improved greatly. However, when the amount of epoxy resin added is over a certain value, the modification effect will be stable with no extra benefit detected. Finally, in terms of the properties of the three respects, 20%, 30%, 30% are given separately as the proposal adding contents.展开更多
This paper focuses on the 2-median location improvement problem on tree networks and the problem is to modify the weights of edges at the minimum cost such that the overall sum of the weighted distance of the vertices...This paper focuses on the 2-median location improvement problem on tree networks and the problem is to modify the weights of edges at the minimum cost such that the overall sum of the weighted distance of the vertices to the respective closest one of two prescribed vertices in the modified network is upper bounded by a given value.l1 norm and l∞norm are used to measure the total modification cost. These two problems have a strong practical application background and important theoretical research value. It is shown that such problems can be transformed into a series of sum-type and bottleneck-type continuous knapsack problems respectively.Based on the property of the optimal solution two O n2 algorithms for solving the two problems are proposed where n is the number of vertices on the tree.展开更多
Mesocarbon microbeads （MCMB） were prepared from coal tar pitch modified by phenolic resin and from the same pitch modified by phenolic resin and hexamethylenetetramine at 440℃ for lh. By investigating the morpholog...Mesocarbon microbeads （MCMB） were prepared from coal tar pitch modified by phenolic resin and from the same pitch modified by phenolic resin and hexamethylenetetramine at 440℃ for lh. By investigating the morphology of mesophase spheres and the structure of the MCMB carbonized at 1000℃ for lh using scanning electron microscope （SEM） and XRD, it was found that phenolic resin accelerated the formation and coalescence of mesophase spheres. Some of the obtained MCMB were hi- or tri-spheres with the distorted microtextural carbon layers. Hexamethylenetetramine in the pitch modified by phenolic resin accelerated the condensation of phenolic resin and consequently expedited the combination of mesophase spheres, which was proved by the formation of some tetra-spheres. Owing to the cross-linkage of the additives, MCMB with complex structure were obtained.展开更多
A novel thermosetting resin system for superabrasives based on novolak and bismaleimide （BMI） was developed. The novolak resin was allylated and then copolymerized with BMI. The structure of allyl novolak and reacti...A novel thermosetting resin system for superabrasives based on novolak and bismaleimide （BMI） was developed. The novolak resin was allylated and then copolymerized with BMI. The structure of allyl novolak and reaction mechanism were analyzed by FFIR. Thermal and mechanical properties were characterized by using com- prehensive thermal analyzer （DSC-TG） and strength tester, respectively. The results showed that high molecular weight of novolak was advantageous for heat-resistance, but was unfavorable for the bending strength. High allyl content improved the heat-resistance but lowered the bending strength. When the molecular weight of novolak was 450 and allyl content was 50%, the best resin system with good heat-resistance and bending strength was obtained. It was suitable for the manufacturing of superabrasive tools.展开更多
A field investigation was conducted to assess the breakdown of azadirachtin A in a tropical coastal savanna soil amended with neem leaves （NL） combined with poultry manure （PM） or cow dung （CD） using gas chromat...A field investigation was conducted to assess the breakdown of azadirachtin A in a tropical coastal savanna soil amended with neem leaves （NL） combined with poultry manure （PM） or cow dung （CD） using gas chromatography. Samples in polythene bags 15 cm long and 4.8 cm in diameter were randomly placed to a depth of 14 cm in the soil, and azadirachtin A concentration was assessed on days 0, 14, 28, 42, 56, 70, and 84. Azadirachtin A degradation in the soil followed first-order reaction kinetics with different half-lives obtained for varying combinations of the amendments. Higher neem amendment levels of 100 g gave shorter half-lives of azadirachtin A than the lower levels of 50 g. Within the 50 g NL group the additions of the poultry manure and the cow dung gave significantly shorter （P 〈0.05） half-lives of azadirachtin A than the sole neem amendment, whereas in the 100 g NL group only additions of 10 g CD and 10 g PM were significantly less （P 〈 0.05） than the sole neem amendment. Different changes resulting from the kind and quantity of animal manure added were observed in the half-lives of azadirachtin A. The 100 g NL group had significantly higher （P 〈0.05） moisture content, which, coupled with the likely differeaces in microbial biomass, could be the major factor responsible for variations in the half-llfe of the compound. Therefore, the quantity of the neem leaves applied and the addition of animal manure affected the breakdown of azadirachtin A in the soil amended with neem leaves.展开更多
The modified petroleum resin emulsion prepared from the C9petroleum resin was modified with maleic anhydride.The effects of maleic rosin and maleic anhydride addition level,the modification time and the alkali liquor ...The modified petroleum resin emulsion prepared from the C9petroleum resin was modified with maleic anhydride.The effects of maleic rosin and maleic anhydride addition level,the modification time and the alkali liquor on the properties of the emulsion were discussed.The results showed that the optimum process conditions covered:a maleic anhydride mass fraction of 1.5%,a maleic rosin mass fraction of 10%,a KOH mass fraction of 1%,a petroleum resin modification temperature of 200℃,a petroleum resin modification duration of 3 h,and a modified petroleum resin emulsion/wax emulsion mixing ratio of 1:1.The particle size of modified petroleum resin emulsion prepared under these conditions was equal to 104.166μm.展开更多
基金The National Natural Science Foundation of China(No50578038)the PhDPrograms Foundation of Ministry of Education of China (No20050286008)
文摘The pavement performance of epoxy resin modified asphalt mixtures was investigated by the Marshall test, the indirect tensile test, the rutting test, the three-pointed bending test and the composite beam fatigue test. In comparison with the performance of epoxy resin modified asphalt mixtures, the performance of stone matrix asphalt mixtures （SMA10） was also investigated. The rutting test and composite beam fatigue test results show that the epoxy resin modified asphalt mixtures can improve permanent deformation and fatigue characteristics. They also show lower temperature susceptibility and greater resistance to moisture damage compared to the SMA10. Findings from the research indicate that the epoxy resin modified asphalt mixture provides an optional material for the pavement of long-span steel bridges in China due to profound performance and economic advantages.
文摘Based on the analysis of the main failures discovered in pavement on steel deck plate and the demanding service condition of the pavement on steel deck, high-temperature rutting test, low-temperature bending test and controlled stress flexural fatigue test are used to study the performance of asphalt mixtures modified by epoxy resin including high-temperature stability, low-temperature cracking-resistance, and fatigue cracking-resistance, which are served to evaluate the modification effect of epoxy resin of different contents. With the addition of epoxy resin, all the three performances are improved greatly. However, when the amount of epoxy resin added is over a certain value, the modification effect will be stable with no extra benefit detected. Finally, in terms of the properties of the three respects, 20%, 30%, 30% are given separately as the proposal adding contents.
基金The National Natural Science Foundation of China(No.10801031)
文摘This paper focuses on the 2-median location improvement problem on tree networks and the problem is to modify the weights of edges at the minimum cost such that the overall sum of the weighted distance of the vertices to the respective closest one of two prescribed vertices in the modified network is upper bounded by a given value.l1 norm and l∞norm are used to measure the total modification cost. These two problems have a strong practical application background and important theoretical research value. It is shown that such problems can be transformed into a series of sum-type and bottleneck-type continuous knapsack problems respectively.Based on the property of the optimal solution two O n2 algorithms for solving the two problems are proposed where n is the number of vertices on the tree.
基金Supported by the National Natural Science Foundation of China (No.50172034).
文摘Mesocarbon microbeads （MCMB） were prepared from coal tar pitch modified by phenolic resin and from the same pitch modified by phenolic resin and hexamethylenetetramine at 440℃ for lh. By investigating the morphology of mesophase spheres and the structure of the MCMB carbonized at 1000℃ for lh using scanning electron microscope （SEM） and XRD, it was found that phenolic resin accelerated the formation and coalescence of mesophase spheres. Some of the obtained MCMB were hi- or tri-spheres with the distorted microtextural carbon layers. Hexamethylenetetramine in the pitch modified by phenolic resin accelerated the condensation of phenolic resin and consequently expedited the combination of mesophase spheres, which was proved by the formation of some tetra-spheres. Owing to the cross-linkage of the additives, MCMB with complex structure were obtained.
文摘A novel thermosetting resin system for superabrasives based on novolak and bismaleimide （BMI） was developed. The novolak resin was allylated and then copolymerized with BMI. The structure of allyl novolak and reaction mechanism were analyzed by FFIR. Thermal and mechanical properties were characterized by using com- prehensive thermal analyzer （DSC-TG） and strength tester, respectively. The results showed that high molecular weight of novolak was advantageous for heat-resistance, but was unfavorable for the bending strength. High allyl content improved the heat-resistance but lowered the bending strength. When the molecular weight of novolak was 450 and allyl content was 50%, the best resin system with good heat-resistance and bending strength was obtained. It was suitable for the manufacturing of superabrasive tools.
基金Project supported by the Centre for School and Community Science and Technology Studies (SACOST), University of Education, Winneba, Ghana.
文摘A field investigation was conducted to assess the breakdown of azadirachtin A in a tropical coastal savanna soil amended with neem leaves （NL） combined with poultry manure （PM） or cow dung （CD） using gas chromatography. Samples in polythene bags 15 cm long and 4.8 cm in diameter were randomly placed to a depth of 14 cm in the soil, and azadirachtin A concentration was assessed on days 0, 14, 28, 42, 56, 70, and 84. Azadirachtin A degradation in the soil followed first-order reaction kinetics with different half-lives obtained for varying combinations of the amendments. Higher neem amendment levels of 100 g gave shorter half-lives of azadirachtin A than the lower levels of 50 g. Within the 50 g NL group the additions of the poultry manure and the cow dung gave significantly shorter （P 〈0.05） half-lives of azadirachtin A than the sole neem amendment, whereas in the 100 g NL group only additions of 10 g CD and 10 g PM were significantly less （P 〈 0.05） than the sole neem amendment. Different changes resulting from the kind and quantity of animal manure added were observed in the half-lives of azadirachtin A. The 100 g NL group had significantly higher （P 〈0.05） moisture content, which, coupled with the likely differeaces in microbial biomass, could be the major factor responsible for variations in the half-llfe of the compound. Therefore, the quantity of the neem leaves applied and the addition of animal manure affected the breakdown of azadirachtin A in the soil amended with neem leaves.
文摘The modified petroleum resin emulsion prepared from the C9petroleum resin was modified with maleic anhydride.The effects of maleic rosin and maleic anhydride addition level,the modification time and the alkali liquor on the properties of the emulsion were discussed.The results showed that the optimum process conditions covered:a maleic anhydride mass fraction of 1.5%,a maleic rosin mass fraction of 10%,a KOH mass fraction of 1%,a petroleum resin modification temperature of 200℃,a petroleum resin modification duration of 3 h,and a modified petroleum resin emulsion/wax emulsion mixing ratio of 1:1.The particle size of modified petroleum resin emulsion prepared under these conditions was equal to 104.166μm.
