ROJ-Elf型储纬器控制系统分析及故障诊断

设计开发ROJ-Elf型储纬器主控板的故障诊断程序。对基于MCS-51单片机的主控制板进行了电路测绘,针对主控板难以修复的问题,开发了相应的故障诊断程序。该程序固化在一片EPROM芯片中,通过取代主控制板中EPROM芯片即可实现对主控板中所有芯片的测试,实现主控板的故障诊断。实际运行结果表明,该方法具有故障诊断快速,便于使用等优点。

基于故障原因-征兆矩阵的故障诊断专家系统

采用故障原因-征兆矩阵实现了多征兆与多故障原因之间复杂关系的表征,提出了一种以故障原因-征兆矩阵为筛选对象的矩阵筛选法;同时,提出了一种应用此筛选法对故障系统进行初步诊断、用几何距离判别法进行精确诊断的故障诊断方法;并对基于此故障诊断方法的故障诊断专家系统的设计进行了研究。

基于电压-时间型故障诊断控制器的电缆环网柜供电模式

通过对基于电压-时间型故障诊断控制器的电缆环网柜的供电方案及控制过程分析,提出配网改造的一种经济、可靠、有效、简单的供电方案模式。

基于“能量—故障”诊断模式的转子断条故障在线监测

为了克服转子断条故障特征分量易受基频分量影响的困难 ,采用了一种基于“能量—故障”的诊断模式 ,利用小波理论对电动机定子电流采样信号进行特征频率提取 ,求出对应的能量分布 ,建立了表征转子断条故障的特征向量 ,用模式识别的方法实现了转子断条故障的快速在线监测与诊断。

星型网络的几种故障诊断度研究

针对星型网络的故障诊断问题,利用集合论、图论等方法对星型网络的结构特性进行研究,给出了星型互连网络在PMC故障模式下的几种诊断度,包括:一步故障诊断度,t1/t1-诊断度,局部故障诊断度。对于一个n维星型网络(n≥3),其一步故障诊断度、t1/t1-诊断度策略和局部故障诊断度分别为n-1,2n-4和n-1,这些诊断度的提出,对星型互连网络的可靠性和容错性的研究具有重要的意义。

APPLICATION OF MULTI-SENSOR DATA FUSION BASED ON FUZZY NEURAL NETWORK IN ROTA TING MECHANICAL FAILURE DIAGNOSIS

At present, multi-se nsor fusion is widely used in object recognition and classification, since this technique can efficiently improve the accuracy and the ability of fault toleranc e. This paper describes a multi-sensor fusion system, which is model-based and used for rotating mechanical failure diagnosis. In the data fusion process, the fuzzy neural network is selected and used for the data fusion at report level. By comparing the experimental results of fault diagnoses based on fusion data wi th that on original separate data,it is shown that the former is more accurate than the latter.

高压电磁式互感器故障特征与判据

随着高压电磁式互感器可靠性研究的发展与深化．互感器故障现象与故障机理显得越来越复杂和不确定．现用系统论的观点和方法概括了互感器故障的特征，总结了现有故障判据，进而提出了故障的模糊矩阵判据，为故障诊断的计算机化和实时化提供了基础．

REALIZATION OF OBJECT-ORIENTED RULE-TYPE EXPERT SYSTEM TEMPLATE

Expert systems (ESs) are being increasingly applied to the fault diagnosis of engines. Based on the idea of ES template (EST), an object-oriented rule-type EST is emphatically studied on such aspects as the object-oriented knowledge representation, the heuristic inference engine with an improved depth-first search (DFS) and the graphical user interface. A diagnositic ES instance for debris on magnetic chip detectors (MCDs) is then created with the EST. The spot running shows that the rule-type EST enhances the abilities of knowledge representation and heuristic inference, and breaks a new way for the rapid construction and implementation of ES.

Industrial LAN for Vibration Monitoring and Fault Diagnosis of Turbo-Generator

The unique of using industrial LAN based on field bus to construct the system of vibration monitoring and fault diagnosis is introduced. The LAN topology, client/server architecture, database and designing of application software for vibration monitoring and fault diagnosis are involved. How to apply industrial LAN to the vibration monitoring and fault diagnosis of turbo generator is discussed, and a scheme of how to construct the industrial LAN for vibration monitoring and fault diagnosis of turbo generator is presented.

AN INTERNET-BASED REMOTE MONITORING SYSTEM FOR AUTOMOBILE TESTING SYSTEMS

Modern automobile testing systems are complexly computerized measure and control systems, and used in automobile vehicle design centers and assembly plants. Their performance is critical but difficult to be monitored efficiently and in real time. This paper introduces an Internet based remote monitoring system for automobile testing systems, and the design and the implementation using Web database and Socket techniques.

Fault Diagnosis in Chemical Process Based on Self-organizing Map Integrated with Fisher Discriminant Analysis

Fault diagnosis and monitoring are very important for complex chemical process. There are numerous methods that have been studied in this field, in which the effective visualization method is still challenging. In order to get a better visualization effect, a novel fault diagnosis method which combines self-organizing map (SOM) with Fisher discriminant analysis (FDA) is proposed. FDA can reduce the dimension of the data in terms of maximizing the separability of the classes. After feature extraction by FDA, SOM can distinguish the different states on the output map clearly and it can also be employed to monitor abnormal states. Tennessee Eastman (TE) process is employed to illustrate the fault diagnosis and monitoring performance of the proposed method. The result shows that the SOM integrated with FDA method is efficient and capable for real-time monitoring and fault diagnosis in complex chemical process.

A multi-scale convolutional auto-encoder and its application in fault diagnosis of rolling bearings

Aiming at the difficulty of fault identification caused by manual extraction of fault features of rotating machinery,a one-dimensional multi-scale convolutional auto-encoder fault diagnosis model is proposed,based on the standard convolutional auto-encoder.In this model,the parallel convolutional and deconvolutional kernels of different scales are used to extract the features from the input signal and reconstruct the input signal;then the feature map extracted by multi-scale convolutional kernels is used as the input of the classifier;and finally the parameters of the whole model are fine-tuned using labeled data.Experiments on one set of simulation fault data and two sets of rolling bearing fault data are conducted to validate the proposed method.The results show that the model can achieve 99.75%,99.3%and 100%diagnostic accuracy,respectively.In addition,the diagnostic accuracy and reconstruction error of the one-dimensional multi-scale convolutional auto-encoder are compared with traditional machine learning,convolutional neural networks and a traditional convolutional auto-encoder.The final results show that the proposed model has a better recognition effect for rolling bearing fault data.

A method combining refined composite multiscale fuzzy entropy with PSO-SVM for roller bearing fault diagnosis

Combining refined composite multiscale fuzzy entropy(RCMFE)and support vector machine(SVM)with particle swarm optimization(PSO)for diagnosing roller bearing faults is proposed in this paper.Compared with refined composite multiscale sample entropy(RCMSE)and multiscale fuzzy entropy(MFE),the smoothness of RCMFE is superior to that of those models.The corresponding comparison of smoothness and analysis of validity through decomposition accuracy are considered in the numerical experiments by considering the white and 1/f noise signals.Then RCMFE,RCMSE and MFE are developed to affect extraction by using different roller bearing vibration signals.Then the extracted RCMFE,RCMSE and MFE eigenvectors are regarded as the input of the PSO-SVM to diagnose the roller bearing fault.Finally,the results show that the smoothness of RCMFE is superior to that of RCMSE and MFE.Meanwhile,the fault classification accuracy is higher than that of RCMSE and MFE.

A new approach for on-line open-circuit fault diagnosis of inverters based on current trajectory

Security and reliability of inverter are an indispensable part in power electronic system. Faults of inverter are usually caused by switch elements’ operating fault. Taking the inverter with hysteresis current control as the research object, a universal open-circuit fault location method which can be applied to multiple control strategies is proposed in the paper. If the switch open-circuit fault happens in inverter, the output phase current will inevitably change, which can be used as a characteristic for diagnosis, combined with the comparison of phase-current direction before and after the fault occurrence, to diagnose and locate the open-circuit fault in a half cycle. Moreover, this method requires neither system control signals nor sensor. The validity, reliability and limitation of the fault location method in the paper are verified and analyzed through dSPACE-based experiment platform.

Fault Diagnosis for Batch Processes by Improved Multi-model Fisher Discriminant Analysis

Since there are not enough fault data in historical data sets, it is very difficult to diagnose faults for batch processes. In addition, a complete batch trajectory can be obtained till the end of its operation. In order to overcome the need for estimated or filled up future unmeasured values in the online fault diagnosis, sufficiently utilize the finite information of faults, and enhance the diagnostic performance, an improved multi-model Fisher discriminant analysis is represented. The trait of the proposed method is that the training data sets are made of the current measured information and the past major discriminant information, and not only the current information or the whole batch data. An industrial typical multi-stage streptomycin fermentation process is used to test the performance of fault diagnosis of the proposed method.

Particle swarm optimization based RVM classifier for non-linear circuit fault diagnosis

A relevance vector machine (RVM) based fault diagnosis method was presented for non-linear circuits. In order to simplify RVM classifier, parameters selection based on particle swarm optimization (PSO) and preprocessing technique based on the kurtosis and entropy of signals were used. Firstly, sinusoidal inputs with different frequencies were applied to the circuit under test (CUT). Then, the resulting frequency responses were sampled to generate features. The frequency response was sampled to compute its kurtosis and entropy, which can show the information capacity of signal. By analyzing the output signals, the proposed method can detect and identify faulty components in circuits. The results indicate that the fault classes can be classified correctly for at least 99% of the test data in example circuit. And the proposed method can diagnose hard and soft faults.

Multi-view feature fusion for rolling bearing fault diagnosis using random forest and autoencoder

To improve the accuracy and robustness of rolling bearing fault diagnosis under complex conditions, a novel method based on multi-view feature fusion is proposed. Firstly, multi-view features from perspectives of the time domain, frequency domain and time-frequency domain are extracted through the Fourier transform, Hilbert transform and empirical mode decomposition (EMD).Then, the random forest model (RF) is applied to select features which are highly correlated with the bearing operating state. Subsequently, the selected features are fused via the autoencoder (AE) to further reduce the redundancy. Finally, the effectiveness of the fused features is evaluated by the support vector machine (SVM). The experimental results indicate that the proposed method based on the multi-view feature fusion can effectively reflect the difference in the state of the rolling bearing, and improve the accuracy of fault diagnosis.

A novel sparse filtering approach based on time-frequency feature extraction and softmax regression for intelligent fault diagnosis under different speeds

Modern agricultural mechanization has put forward higher requirements for the intelligent defect diagnosis.However,the fault features are usually learned and classified under all speeds without considering the effects of speed fluctuation.To overcome this deficiency,a novel intelligent defect detection framework based on time-frequency transformation is presented in this work.In the framework,the samples under one speed are employed for training sparse filtering model,and the remaining samples under different speeds are adopted for testing the effectiveness.Our proposed approach contains two stages:1)the time-frequency domain signals are acquired from the mechanical raw vibration data by the short time Fourier transform algorithm,and then the defect features are extracted from time-frequency domain signals by sparse filtering algorithm;2)different defect types are classified by the softmax regression using the defect features.The proposed approach can be employed to mine available fault characteristics adaptively and is an effective intelligent method for fault detection of agricultural equipment.The fault detection performances confirm that our approach not only owns strong ability for fault classification under different speeds,but also obtains higher identification accuracy than the other methods.

Weak-fault diagnosis using state-transition-algorithm-based adaptive stochastic-resonance method

In the early fault period of high-speed train systems, the interested characteristic signals are relatively weak and easily submerged in heavy noise. In order to solve this problem, a state-transition-algorithm (STA)-based adaptive stochastic resonance (SR) method is proposed, which provides an alternative solution to the problem that the traditional SR has fixed parameters or optimizes only a single parameter and ignores the interaction between parameters. To be specific, the frequency-shifted and re-scaling are firstly used to pre-process an actual large signal to meet the requirement of the adiabatic approximate small parameter. And then, the signal-to-noise ratio is used as the optimization target, and the STA-based adaptive SR is used to synchronously optimize the system parameters. Finally, the optimal extraction and frequency recovery of a weak characteristic signal from a broken rotor bar fault are realized. The proposed method is compared with the existing methods by the early broken rotor bar experiments of traction motor. Experiment results show that the proposed method is better than the other methods in extracting weak signals, and the validity of this method is verified.

Fault diagnosis method for switch control circuit based on SVM-AdaBoost

In order to realize the fault diagnosis of the control circuit of all-electronic computer interlocking system(ACIS)for railway signals,taking a five-wire switch electronic control module as an research object,we propose a method of selecting the sample set of the basic classifier by roulette method and realizing fault diagnosis by using SVM-AdaBoost.The experimental results show that the proportion of basic classifier samples affects classification accuracy,which reaches the highest when the proportion is 85%.When selecting the sample set of basic classifier by roulette method,the fault diagnosis accuracy is generally higher than that of the maximum weight priority method.When the optimal proportion 85%is taken,the accuracy is highest up to 96.3%.More importantly,this way can better adapt to the critical data and improve the anti-interference ability of the algorithm,and therefore it provides a basis for fault diagnosis of ACIS.