After gas drainage, the outburst seam is dry and, consequently, during subsequent mechanized mining, unwanted dust production is extensive. Because the hard dustfall typically has a small particle size it contains a h...After gas drainage, the outburst seam is dry and, consequently, during subsequent mechanized mining, unwanted dust production is extensive. Because the hard dustfall typically has a small particle size it contains a high percentage of respirable dust. Considering these factors, this paper improved the efficiency of dustfall by reducing the surface tension of the liquid used as a wetting agent, then configuring five kinds of wetting agents by adopting various doses and types of surfactants, neutral inorganic salts and chemical additives, etc. After purchasing DA-85 and SRJ-1 wetting agent, the surface tension and critical micelle concentration of seven kinds of wetting agents were measured using the capillary rise method. Wetting agent A was confirmed to have the best comprehensive effect. The experiments were optimized by measuring and comparatively analyzing contact angles of pure water, SRJ-1 wetting agent and wetting agent A on the surface of different coal samples using a contact angle measurement instrument (HARKE- SPCA). By comparative analysis, dust-proof effects of seam, dynamic pressure water infusion and high- pressure spray in the tunneling face at the Daning coal mine using pure water, wetting agent SRJ-1 and A, it was determined that after using wetting agent A, the average dust concentration in the place of the mining machine driver, 10 m and 110 m away from the tunneling front is approximately 300 rag/ m^3, 240 mg/m^3 and 100 mg/m^3, respectively, This practice increased the dust-proof efficiency dramati- cally and achieved a good comprehensive dust-proof effect.展开更多
In the study of the application effectiveness of deep-hole controlled pre-splittingblasting technology,it was found through laboratory micro test and field study on a mine insouth China that under the technology,coal ...In the study of the application effectiveness of deep-hole controlled pre-splittingblasting technology,it was found through laboratory micro test and field study on a mine insouth China that under the technology,coal masses produce many irreversible cracks.Afterblasting,the nearer the distance from blasting hole,the larger the BET surface areaand volume ratio of the infiltration pore are;they increased by 11.47%and 5.73%,respectively.The coefficient of air permeability is increased 4 times.After 3 months,the gasdrainage rate was increased by 66%.In the first 15 days,the cumulative pumped gas was1.93 times of blasting before.The average absolute gas emission decreased by 63.46%.Experimental results show that deep-hole controlled pre-splitting blasting not only preventscoal and gas outburst,but also gives good economic results.展开更多
The advantages and disadvantages of various outburst prevention measures inheading face were analyzed.The mechanism of outburst prevention about hydraulic extrusionmeasure was studied, the technological parameters wer...The advantages and disadvantages of various outburst prevention measures inheading face were analyzed.The mechanism of outburst prevention about hydraulic extrusionmeasure was studied, the technological parameters were introduced, and the effectof outburst prevention was investigated.The in-situ experimental results show that thehydraulic extrusion measures are applied in serious outburst mine, not only the stress ofstimulate outburst is eliminated effectively but also the gas in coal seam is released efficiently,the measures get obvious effect on coal and gas outburst prevention, and theroadway driving speed is increased by 1.5 times, implementing a safe and rapid excavation.展开更多
基金partly supported by the National Natural Science Foundation of China (No.51404263)the National Natural Science Foundation of Jiangsu Province (No.BK20130203)+3 种基金the Coal Mine Joint Funds of the National Natural Science Foundation of China (No.51134023)the State Key Laboratory Cultivation Base for Gas Geology and Gas Control (No.WS2013A05)the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)the independent study for State Key Laboratory of Coal Resources and Safe Mining,China University of Mining and Technology (No.SKLCRSM09X04)
文摘After gas drainage, the outburst seam is dry and, consequently, during subsequent mechanized mining, unwanted dust production is extensive. Because the hard dustfall typically has a small particle size it contains a high percentage of respirable dust. Considering these factors, this paper improved the efficiency of dustfall by reducing the surface tension of the liquid used as a wetting agent, then configuring five kinds of wetting agents by adopting various doses and types of surfactants, neutral inorganic salts and chemical additives, etc. After purchasing DA-85 and SRJ-1 wetting agent, the surface tension and critical micelle concentration of seven kinds of wetting agents were measured using the capillary rise method. Wetting agent A was confirmed to have the best comprehensive effect. The experiments were optimized by measuring and comparatively analyzing contact angles of pure water, SRJ-1 wetting agent and wetting agent A on the surface of different coal samples using a contact angle measurement instrument (HARKE- SPCA). By comparative analysis, dust-proof effects of seam, dynamic pressure water infusion and high- pressure spray in the tunneling face at the Daning coal mine using pure water, wetting agent SRJ-1 and A, it was determined that after using wetting agent A, the average dust concentration in the place of the mining machine driver, 10 m and 110 m away from the tunneling front is approximately 300 rag/ m^3, 240 mg/m^3 and 100 mg/m^3, respectively, This practice increased the dust-proof efficiency dramati- cally and achieved a good comprehensive dust-proof effect.
基金Supported by Project from National Natural Science Foundation of China(50674111)the National key Technology R&D Program in 10th Five Years Plan of China
文摘In the study of the application effectiveness of deep-hole controlled pre-splittingblasting technology,it was found through laboratory micro test and field study on a mine insouth China that under the technology,coal masses produce many irreversible cracks.Afterblasting,the nearer the distance from blasting hole,the larger the BET surface areaand volume ratio of the infiltration pore are;they increased by 11.47%and 5.73%,respectively.The coefficient of air permeability is increased 4 times.After 3 months,the gasdrainage rate was increased by 66%.In the first 15 days,the cumulative pumped gas was1.93 times of blasting before.The average absolute gas emission decreased by 63.46%.Experimental results show that deep-hole controlled pre-splitting blasting not only preventscoal and gas outburst,but also gives good economic results.
文摘The advantages and disadvantages of various outburst prevention measures inheading face were analyzed.The mechanism of outburst prevention about hydraulic extrusionmeasure was studied, the technological parameters were introduced, and the effectof outburst prevention was investigated.The in-situ experimental results show that thehydraulic extrusion measures are applied in serious outburst mine, not only the stress ofstimulate outburst is eliminated effectively but also the gas in coal seam is released efficiently,the measures get obvious effect on coal and gas outburst prevention, and theroadway driving speed is increased by 1.5 times, implementing a safe and rapid excavation.