Abstract Selection of net with a suitable mesh size is a key concern in the quantitative assessment of zooplankton, which is cru- cial to understand pelagic ecosystem processes. This study compared the copepod collect...Abstract Selection of net with a suitable mesh size is a key concern in the quantitative assessment of zooplankton, which is cru- cial to understand pelagic ecosystem processes. This study compared the copepod collecting efficiency of three commonly used plankton nets, namely, the China standard coarse net (505 gm mesh), the China standard fine net (77 gin), and the WP-2 net (200 μm) The experiment was performed at six stations in the Bohai Sea during the autumn of 2012. The coarse net substantially un- der-sampled small individuals (body widths 〈 672 gm) and led to the lowest species number in each tow, whereas the fine net col- lected all small copepod species but failed to collect rare species. The WP-2 net appeared to be a compromise of the two other nets, collecting both small copepods and rare species. The abundance of copepods collected by the coarse net (126.4±86.5 indm-3) was one to two orders of magnitude lower than that by the WP-2 net (5802.4 ± 2595.4 indm3), and the value of the fine net (11117.0±4563.41 indm-3) was nearly twice that of the WP-2 net. The abundance of large copepods (i.e., adult Calanus sinicus) in the three nets showed no significant differences, but the abundance of small copepods declined with decreasing mesh size. The dif- ference in abundance resulted from the under-sampling of small copepods with body widths 〈 672 μm and 〈 266μm by the coarse and WP-2 nets, respectively.展开更多
Sequential and single extraction procedures were applied to both fresh and dried Sedum Plumbizincicola leaves and stems.The extractants, different from those of soil, sediment or sewage sludge metal fractions, were wa...Sequential and single extraction procedures were applied to both fresh and dried Sedum Plumbizincicola leaves and stems.The extractants, different from those of soil, sediment or sewage sludge metal fractions, were water, 80%(v/v) ethanol, 1 mol/L Na Cl,2% HAc and 0.6 mol/L HCl. Zn, Cd and Cu in the extracts and samples were measured by flame atomic adsorption spectrometry. In sequential extraction procedures, water soluble form and ethanol soluble form are the main fractions for Zn, while water soluble form and Na Cl soluble form for Cd, and comparatively uniform distribution for Cu with the residue form most and HCl soluble form second. Single extraction procedures are used to compare the extraction efficiencies of the five reagents to screen appropriate extractants and operating conditions for liquid extraction to deal with large amount of harvested metal-contained biomass, which will pose a threat to the environment if treated improperly. The sequences of extraction efficiencies are HCl>Na Cl≈HAc>Water≈Ethanol for Zn and HCl≈Na Cl≈HAc>Water>Ethanol for Cd. As for Cu, all the five extractants cannot effectively extract Cu, but HCl achieves a higher efficiency(>70% in fresh samples, and 45%-60% in dried samples). Besides, extraction efficiencies for most extractants in fresh samples are higher than those in dried samples, and extraction efficiencies of stems and leaves for the five extractants are close. The two extraction procedures can obtain high degree of accuracy with the relative standard deviation(RSD)lower than 10%, and metal recoveries are controlled between 80%-120% with most of 90%-110%.展开更多
This paper presents an RF energy harvesting system for wireless intraocular pressure monitoring applications.The system consists of an implantable antenna and a rectifier.A new sizing strategy is adopted to optimize t...This paper presents an RF energy harvesting system for wireless intraocular pressure monitoring applications.The system consists of an implantable antenna and a rectifier.A new sizing strategy is adopted to optimize the conversion efficiency of the rectifier,and the design principle of an implantable antenna is introduced from material selection and structure design.Results from testing demonstrate that the antenna gain is about-20 dBi and the rectifier's maximum total conversion efficiency which contains match efficiency and rectifying efficiency is 47.18%under the implementation of0.18μm standard CMOS process.The maximum power obtained from the proposed system is 8μW when the power density of electromagnetic wave is lower than the national standard 40μW/cm^2 at915 MHz,which is enough to power the intraocular pressure monitoring system.展开更多
In the last decade, parametric and generative design techniques become quite popular for form-finding strategies or for pushing automation in design processes. Nevertheless, these techniques could be applied in engine...In the last decade, parametric and generative design techniques become quite popular for form-finding strategies or for pushing automation in design processes. Nevertheless, these techniques could be applied in engineering processes as well in order to improve the effectiveness and the efficiency of manufacturing processes in BI (building industry). Focusing on the case study of GLT (glued-laminated timber), this paper shows the procedure of programming a parametric algorithm adopted by authors that pursues two specific design intents: reducing the usage of unneeded high-quality raw material and improving the efficiency of production processes by producing DF (digital fabrication) contents for standard production systems of GLT. According to different European and international standards, thanks to FEM (finite element model) simulations and curvature analysis, the algorithm allows saving at least 33% of high-quality raw material and, according to early first surveys on a standard production system, 30% of operation time among product engineering-processes.展开更多
In order to obtain and master the surface thermal deformation of paraboloid antennas,a fast iterative closest point( FICP) algorithm based on design coordinate guidance is proposed,which can satisfy the demands of rap...In order to obtain and master the surface thermal deformation of paraboloid antennas,a fast iterative closest point( FICP) algorithm based on design coordinate guidance is proposed,which can satisfy the demands of rapid detection for surface thermal deformation. Firstly,the basic principle of the ICP algorithm for registration of a free surface is given,and the shortcomings of the ICP algorithm in the registration of surface are analysed,such as its complex computation,long calculation time,low efficiency,and relatively strict initial registration position. Then an improved FICP algorithm based on design coordinate guidance is proposed. Finally,the FICP algorithm is applied to the fast registration test for the surface thermal deformation of a paraboloid antenna. Results indicate that the approach offers better performance with regard to fast surface registration and the algorithm is more simple,efficient,and easily realized in practical engineering application.展开更多
Fast growth of mobile internet and internet-of-things has propelled the concept formation and research on 5G wireless communications systems which are to be standardized around 2020(IMT-2020).There will be diverse app...Fast growth of mobile internet and internet-of-things has propelled the concept formation and research on 5G wireless communications systems which are to be standardized around 2020(IMT-2020).There will be diverse application scenarios expected for 5G networks.Hence,key performance indicators(KPIs) of 5G systems would be very diverse,not just the peak data rate and average/edge spectral efficiency requirements as in previous generations.For each typical scenario,multiple technologies may be used independently or jointly to improve the transmission efficiency,to lower the cost,and to increase the number of connections,etc.Key enabling technologies are discussed which include massive MIMO,ultradense deployment specific techniques,nonorthogonal transmission,high frequency communications,etc.展开更多
This paper provides a comprehensive analysis on cooling tower fouling data taken from seven 15.54 mm I.D. helically ribbed, copper tubes and a plain tube at Re = 16000. There are two key processes during fouling forma...This paper provides a comprehensive analysis on cooling tower fouling data taken from seven 15.54 mm I.D. helically ribbed, copper tubes and a plain tube at Re = 16000. There are two key processes during fouling formation: fouling deposition and fouling removal, which can be determined by mass transfer and fluid friction respectively. The mass transfer coefficient can be calculated through three analogies: Prandtl analogy, VonKarman analogy, and Chilton-Colburn analogy. Based on our analyses, Von-Karman analogy is the optimized analogy, which can well predict the formation of cooling tower fouling. Series of semi-theoretical fouling correlations as a function of the product of area indexes and efficiency indexes were developed, which can be applicable to different internally ribbed geometries. The correlations can be directly used to assess the fouling ootential of enhanced tubes in actual coolinu tower water situations.展开更多
To solve the problems of divergence,low accuracy and project application of membrane wrinkling analysis,an analysis method of zero shear modulus and equivalent stiffness was proposed.This method is an improvement to t...To solve the problems of divergence,low accuracy and project application of membrane wrinkling analysis,an analysis method of zero shear modulus and equivalent stiffness was proposed.This method is an improvement to the previous method (Method I) of local coordinate transposition and stiffness equivalence.The new method is derived and the feasibility is theoretically proved.A small-scale membrane structure is analyzed by the two methods,and the results show that the computational efficiency of the new method (Method II) is approximately 23 times that of Method I.When Method II is applied to a large-scale membrane stadium structure,it is found that this new method can quickly make the second principal stress of one way wrinkled elements zero,and make the two principal stresses of two-way wrinkled elements zero as well.It could attain the correct load responses right after the appearance of wrinkled elements,which indicates that Method II can be applied to wrinkling analysis of large-scale membrane structures.展开更多
AIM:To evaluate survival and recurrence after salvage liver transplantation(SLT) for the treatment of hepatocellular carcinoma(HCC) compared with primary liver transplantation(PLT) using a meta-analysis.METHODS:Litera...AIM:To evaluate survival and recurrence after salvage liver transplantation(SLT) for the treatment of hepatocellular carcinoma(HCC) compared with primary liver transplantation(PLT) using a meta-analysis.METHODS:Literature on SLT versus PLT for the treatment of HCC published between 1966 and July 2011 was retrieved.A meta-analysis was conducted to estimate pooled survival and disease-free rates.A fixed or random-effect model was established to collect the data.RESULTS:The differences in overall survival and disease-free survival rates at 1-year,3-year and 5-year survival rates were not statistically significant between SLT group and PLT group(P > 0.05).After stratifying the various studies by donor source and Milan criteria,we found that:(1) Living donor liver transplantation recipients had significantly higher 1-year survival rate,lower 3-year and 5-year survival rates compared with deceased-donor liver transplantation(DDLT) recipients.And in DDLT recipients they had better 1-year and 5-year disease-free survival rate in SLT group;and(2) No difference was seen in 1-year,3-year and 5-year survival rates between two groups who beyond Milan criteria at the time of liver transplantation.CONCLUSION:SLT can be effectively performed for patients with recurrence or deterioration of liver function after hepatectomy for HCC.It does not increase the perioperative mortality and has a similar long-term survival rates compared to PLT.展开更多
Multi-target tracking(MTT) is a research hotspot of wireless sensor networks at present.A self-organized dynamic cluster task allocation scheme is used to implement collaborative task allocation for MTT in WSN and a s...Multi-target tracking(MTT) is a research hotspot of wireless sensor networks at present.A self-organized dynamic cluster task allocation scheme is used to implement collaborative task allocation for MTT in WSN and a special cluster member(CM) node selection method is put forward in the scheme.An energy efficiency model was proposed under consideration of both energy consumption and remaining energy balance in the network.A tracking accuracy model based on area-sum principle was also presented through analyzing the localization accuracy of triangulation.Then,the two models mentioned above were combined to establish dynamic cluster member selection model for MTT where a comprehensive performance index function was designed to guide the CM node selection.This selection was fulfilled using genetic algorithm.Simulation results show that this method keeps both energy efficiency and tracking quality in optimal state,and also indicate the validity of genetic algorithm in implementing CM node selection.展开更多
Abstract: Nowadays energy saving and environmental protection are crucial issues in the international society. One of the best solutions for both issues is to improve energy efficiency. To improve energy efficiency, ...Abstract: Nowadays energy saving and environmental protection are crucial issues in the international society. One of the best solutions for both issues is to improve energy efficiency. To improve energy efficiency, it is commonly recognized by both standards and energy sectors that Minimum Energy Performance Standards (MEPS) could play an important role . China and the USA, the top two energy consumption countries in the world, both have adopted MEPS program to address the problem of energy conservation and environmental protection. This paper analyzes and compares the two countries' MEPS programs from a historical and legal context, examining the role of different stakeholders in the process,the process, the outcomes by standards,and then makes some recommendations for both sides.展开更多
A full-scale experimental study of treating mustard wastewater by the integrated bioreactor with designed scale of 1 000 m3/d is conducted combined with a demonstration project. The systematical researches on the effi...A full-scale experimental study of treating mustard wastewater by the integrated bioreactor with designed scale of 1 000 m3/d is conducted combined with a demonstration project. The systematical researches on the efficiency of combined operation conditions of anaerobic-aerobic and anaerobic-aerobic-flocculation as well as chemical phosphorus removal of hypersaline mustard wastewater are conducted. The optimal operation condition and parameters in pretreatment of mustard wastewater in winter (the water temperature ranges 8-15 ~C) are determined: the anaerobic load is 3.0 kg (COD)/(m3.d), the average COD and phosphate concentration of the inflow are respectively 3 883 mg/L and 35.53 mg/L and the dosage of flocculent (PAC) is 400 mg/L. The anaerobic-aerobic-flocculation combined operation condition and postpositive phosphorous removal with ferrous sulfate are employed. After treatment, the COD of the effluent is 470 mg/L and the average phosphate concentration is 5.09 mg/L. The effluent could achieve the third-level of Integrated Wastewater Discharge Standard (GB 8978--1996).展开更多
Cognitive radio is considered as an efficient way to improve the spectrum efficiency. As one of its key technologies,spectrum handoff can guarantee the transmission continuity of secondary users(SUs). In this paper,we...Cognitive radio is considered as an efficient way to improve the spectrum efficiency. As one of its key technologies,spectrum handoff can guarantee the transmission continuity of secondary users(SUs). In this paper,we address a new and more generalized spectrum handoff problem in cognitive radio networks(CRNs),by considering simultaneously energy efficiency,multiple spectrum handoffs and multiple channels. Furthermore,effects of the primary users'(PUs')arrival and service rate on the target channel sequence selection are also considered. In order to obtain the energy-efficient target channel sequence,we firstly analyze the energy consumption and the number of delivered bits per hertz in the spectrum handoff process,and formulate a ratio-type energy efficiency optimization problem,which can be transformed into a parametric problem by utilizing fractional programming. Then,we propose an algorithm combining dynamic programming with bisection(DPB)algorithm to solve the energy efficiency optimization problem. Our simulation results verify that the designed target channel sequence has better performance than the existing algorithms in terms of energy efficiency.展开更多
基金funded by the Fundamental Research Funds for the Central Universities (No.201262017)the National Natural Science Foundation of China (No.41210008)
文摘Abstract Selection of net with a suitable mesh size is a key concern in the quantitative assessment of zooplankton, which is cru- cial to understand pelagic ecosystem processes. This study compared the copepod collecting efficiency of three commonly used plankton nets, namely, the China standard coarse net (505 gm mesh), the China standard fine net (77 gin), and the WP-2 net (200 μm) The experiment was performed at six stations in the Bohai Sea during the autumn of 2012. The coarse net substantially un- der-sampled small individuals (body widths 〈 672 gm) and led to the lowest species number in each tow, whereas the fine net col- lected all small copepod species but failed to collect rare species. The WP-2 net appeared to be a compromise of the two other nets, collecting both small copepods and rare species. The abundance of copepods collected by the coarse net (126.4±86.5 indm-3) was one to two orders of magnitude lower than that by the WP-2 net (5802.4 ± 2595.4 indm3), and the value of the fine net (11117.0±4563.41 indm-3) was nearly twice that of the WP-2 net. The abundance of large copepods (i.e., adult Calanus sinicus) in the three nets showed no significant differences, but the abundance of small copepods declined with decreasing mesh size. The dif- ference in abundance resulted from the under-sampling of small copepods with body widths 〈 672 μm and 〈 266μm by the coarse and WP-2 nets, respectively.
基金Project(2013CB228106)supported by the National Key Basic Research Program of ChinaProject(2012AA06A204)supported by the National High Technology Research and Development Program of China
文摘Sequential and single extraction procedures were applied to both fresh and dried Sedum Plumbizincicola leaves and stems.The extractants, different from those of soil, sediment or sewage sludge metal fractions, were water, 80%(v/v) ethanol, 1 mol/L Na Cl,2% HAc and 0.6 mol/L HCl. Zn, Cd and Cu in the extracts and samples were measured by flame atomic adsorption spectrometry. In sequential extraction procedures, water soluble form and ethanol soluble form are the main fractions for Zn, while water soluble form and Na Cl soluble form for Cd, and comparatively uniform distribution for Cu with the residue form most and HCl soluble form second. Single extraction procedures are used to compare the extraction efficiencies of the five reagents to screen appropriate extractants and operating conditions for liquid extraction to deal with large amount of harvested metal-contained biomass, which will pose a threat to the environment if treated improperly. The sequences of extraction efficiencies are HCl>Na Cl≈HAc>Water≈Ethanol for Zn and HCl≈Na Cl≈HAc>Water>Ethanol for Cd. As for Cu, all the five extractants cannot effectively extract Cu, but HCl achieves a higher efficiency(>70% in fresh samples, and 45%-60% in dried samples). Besides, extraction efficiencies for most extractants in fresh samples are higher than those in dried samples, and extraction efficiencies of stems and leaves for the five extractants are close. The two extraction procedures can obtain high degree of accuracy with the relative standard deviation(RSD)lower than 10%, and metal recoveries are controlled between 80%-120% with most of 90%-110%.
基金Supported by the Shanghai Science Committee Project(No.Y232821D01)
文摘This paper presents an RF energy harvesting system for wireless intraocular pressure monitoring applications.The system consists of an implantable antenna and a rectifier.A new sizing strategy is adopted to optimize the conversion efficiency of the rectifier,and the design principle of an implantable antenna is introduced from material selection and structure design.Results from testing demonstrate that the antenna gain is about-20 dBi and the rectifier's maximum total conversion efficiency which contains match efficiency and rectifying efficiency is 47.18%under the implementation of0.18μm standard CMOS process.The maximum power obtained from the proposed system is 8μW when the power density of electromagnetic wave is lower than the national standard 40μW/cm^2 at915 MHz,which is enough to power the intraocular pressure monitoring system.
文摘In the last decade, parametric and generative design techniques become quite popular for form-finding strategies or for pushing automation in design processes. Nevertheless, these techniques could be applied in engineering processes as well in order to improve the effectiveness and the efficiency of manufacturing processes in BI (building industry). Focusing on the case study of GLT (glued-laminated timber), this paper shows the procedure of programming a parametric algorithm adopted by authors that pursues two specific design intents: reducing the usage of unneeded high-quality raw material and improving the efficiency of production processes by producing DF (digital fabrication) contents for standard production systems of GLT. According to different European and international standards, thanks to FEM (finite element model) simulations and curvature analysis, the algorithm allows saving at least 33% of high-quality raw material and, according to early first surveys on a standard production system, 30% of operation time among product engineering-processes.
基金Supported by the National Natural Science Foundation of China(No.51474217,41501562)the Open Fund Program of Henan Engineering Laboratory of Pollution Control and Coal Chemical Resources Comprehensive Utilization(No.502002-B07,502002-A04)
文摘In order to obtain and master the surface thermal deformation of paraboloid antennas,a fast iterative closest point( FICP) algorithm based on design coordinate guidance is proposed,which can satisfy the demands of rapid detection for surface thermal deformation. Firstly,the basic principle of the ICP algorithm for registration of a free surface is given,and the shortcomings of the ICP algorithm in the registration of surface are analysed,such as its complex computation,long calculation time,low efficiency,and relatively strict initial registration position. Then an improved FICP algorithm based on design coordinate guidance is proposed. Finally,the FICP algorithm is applied to the fast registration test for the surface thermal deformation of a paraboloid antenna. Results indicate that the approach offers better performance with regard to fast surface registration and the algorithm is more simple,efficient,and easily realized in practical engineering application.
文摘Fast growth of mobile internet and internet-of-things has propelled the concept formation and research on 5G wireless communications systems which are to be standardized around 2020(IMT-2020).There will be diverse application scenarios expected for 5G networks.Hence,key performance indicators(KPIs) of 5G systems would be very diverse,not just the peak data rate and average/edge spectral efficiency requirements as in previous generations.For each typical scenario,multiple technologies may be used independently or jointly to improve the transmission efficiency,to lower the cost,and to increase the number of connections,etc.Key enabling technologies are discussed which include massive MIMO,ultradense deployment specific techniques,nonorthogonal transmission,high frequency communications,etc.
基金Supported by the National Natural Science Foundation of China(51210011,51276091)the Research Award Fund for Outstanding Young Scientists in Shandong Province(BS2012CL014)the Natural Science Foundation of Zhejiang Province,China(Z13E060001)
文摘This paper provides a comprehensive analysis on cooling tower fouling data taken from seven 15.54 mm I.D. helically ribbed, copper tubes and a plain tube at Re = 16000. There are two key processes during fouling formation: fouling deposition and fouling removal, which can be determined by mass transfer and fluid friction respectively. The mass transfer coefficient can be calculated through three analogies: Prandtl analogy, VonKarman analogy, and Chilton-Colburn analogy. Based on our analyses, Von-Karman analogy is the optimized analogy, which can well predict the formation of cooling tower fouling. Series of semi-theoretical fouling correlations as a function of the product of area indexes and efficiency indexes were developed, which can be applicable to different internally ribbed geometries. The correlations can be directly used to assess the fouling ootential of enhanced tubes in actual coolinu tower water situations.
基金Project(020940) supported by the Natural Science Foundation of Guangdong Province,China
文摘To solve the problems of divergence,low accuracy and project application of membrane wrinkling analysis,an analysis method of zero shear modulus and equivalent stiffness was proposed.This method is an improvement to the previous method (Method I) of local coordinate transposition and stiffness equivalence.The new method is derived and the feasibility is theoretically proved.A small-scale membrane structure is analyzed by the two methods,and the results show that the computational efficiency of the new method (Method II) is approximately 23 times that of Method I.When Method II is applied to a large-scale membrane stadium structure,it is found that this new method can quickly make the second principal stress of one way wrinkled elements zero,and make the two principal stresses of two-way wrinkled elements zero as well.It could attain the correct load responses right after the appearance of wrinkled elements,which indicates that Method II can be applied to wrinkling analysis of large-scale membrane structures.
文摘AIM:To evaluate survival and recurrence after salvage liver transplantation(SLT) for the treatment of hepatocellular carcinoma(HCC) compared with primary liver transplantation(PLT) using a meta-analysis.METHODS:Literature on SLT versus PLT for the treatment of HCC published between 1966 and July 2011 was retrieved.A meta-analysis was conducted to estimate pooled survival and disease-free rates.A fixed or random-effect model was established to collect the data.RESULTS:The differences in overall survival and disease-free survival rates at 1-year,3-year and 5-year survival rates were not statistically significant between SLT group and PLT group(P > 0.05).After stratifying the various studies by donor source and Milan criteria,we found that:(1) Living donor liver transplantation recipients had significantly higher 1-year survival rate,lower 3-year and 5-year survival rates compared with deceased-donor liver transplantation(DDLT) recipients.And in DDLT recipients they had better 1-year and 5-year disease-free survival rate in SLT group;and(2) No difference was seen in 1-year,3-year and 5-year survival rates between two groups who beyond Milan criteria at the time of liver transplantation.CONCLUSION:SLT can be effectively performed for patients with recurrence or deterioration of liver function after hepatectomy for HCC.It does not increase the perioperative mortality and has a similar long-term survival rates compared to PLT.
基金Projects(90820302,60805027)supported by the National Natural Science Foundation of ChinaProject(200805330005)supported by the Research Fund for the Doctoral Program of Higher Education,ChinaProject(2009FJ4030)supported by Academician Foundation of Hunan Province,China
文摘Multi-target tracking(MTT) is a research hotspot of wireless sensor networks at present.A self-organized dynamic cluster task allocation scheme is used to implement collaborative task allocation for MTT in WSN and a special cluster member(CM) node selection method is put forward in the scheme.An energy efficiency model was proposed under consideration of both energy consumption and remaining energy balance in the network.A tracking accuracy model based on area-sum principle was also presented through analyzing the localization accuracy of triangulation.Then,the two models mentioned above were combined to establish dynamic cluster member selection model for MTT where a comprehensive performance index function was designed to guide the CM node selection.This selection was fulfilled using genetic algorithm.Simulation results show that this method keeps both energy efficiency and tracking quality in optimal state,and also indicate the validity of genetic algorithm in implementing CM node selection.
文摘Abstract: Nowadays energy saving and environmental protection are crucial issues in the international society. One of the best solutions for both issues is to improve energy efficiency. To improve energy efficiency, it is commonly recognized by both standards and energy sectors that Minimum Energy Performance Standards (MEPS) could play an important role . China and the USA, the top two energy consumption countries in the world, both have adopted MEPS program to address the problem of energy conservation and environmental protection. This paper analyzes and compares the two countries' MEPS programs from a historical and legal context, examining the role of different stakeholders in the process,the process, the outcomes by standards,and then makes some recommendations for both sides.
基金Project(20090191120036) supported by the Fund of Doctoral Program of Ministry of Education,China
文摘A full-scale experimental study of treating mustard wastewater by the integrated bioreactor with designed scale of 1 000 m3/d is conducted combined with a demonstration project. The systematical researches on the efficiency of combined operation conditions of anaerobic-aerobic and anaerobic-aerobic-flocculation as well as chemical phosphorus removal of hypersaline mustard wastewater are conducted. The optimal operation condition and parameters in pretreatment of mustard wastewater in winter (the water temperature ranges 8-15 ~C) are determined: the anaerobic load is 3.0 kg (COD)/(m3.d), the average COD and phosphate concentration of the inflow are respectively 3 883 mg/L and 35.53 mg/L and the dosage of flocculent (PAC) is 400 mg/L. The anaerobic-aerobic-flocculation combined operation condition and postpositive phosphorous removal with ferrous sulfate are employed. After treatment, the COD of the effluent is 470 mg/L and the average phosphate concentration is 5.09 mg/L. The effluent could achieve the third-level of Integrated Wastewater Discharge Standard (GB 8978--1996).
基金Heilongjiang Province Natural Science Foundation(Grant No.F2016019);National Natural Science Foundation of China(Grant No.61571162);Major National Science and Technology Project(2015ZX03004002004); China Postdoctoral Science Foundation(Grant No.2014M561347).
文摘Cognitive radio is considered as an efficient way to improve the spectrum efficiency. As one of its key technologies,spectrum handoff can guarantee the transmission continuity of secondary users(SUs). In this paper,we address a new and more generalized spectrum handoff problem in cognitive radio networks(CRNs),by considering simultaneously energy efficiency,multiple spectrum handoffs and multiple channels. Furthermore,effects of the primary users'(PUs')arrival and service rate on the target channel sequence selection are also considered. In order to obtain the energy-efficient target channel sequence,we firstly analyze the energy consumption and the number of delivered bits per hertz in the spectrum handoff process,and formulate a ratio-type energy efficiency optimization problem,which can be transformed into a parametric problem by utilizing fractional programming. Then,we propose an algorithm combining dynamic programming with bisection(DPB)algorithm to solve the energy efficiency optimization problem. Our simulation results verify that the designed target channel sequence has better performance than the existing algorithms in terms of energy efficiency.