Flat thin ice (<30 cm thick) is a common ice type in the Bohai Sea, China. Ice thickness detection is important to offshore exploration and marine transport in winter. Synthetic aperture radar (SAR) can be used to ...Flat thin ice (<30 cm thick) is a common ice type in the Bohai Sea, China. Ice thickness detection is important to offshore exploration and marine transport in winter. Synthetic aperture radar (SAR) can be used to acquire sea ice data in all weather conditions, and it is a useful tool for monitoring sea ice conditions. In this paper, we combine a multi-layered sea ice electromagnetic (EM) scattering model with a sea ice thermodynamic model to assess the determination of the thickness of flat thin ice in the Bohai Sea using SAR at different frequencies, polarization, and incidence angles. Our modeling studies suggest that co-polarization backscattering coefficients and the co-polarized ratio can be used to retrieve the thickness of flat thin ice from C- and X-band SAR, while the co-polarized correlation coefficient can be used to retrieve flat thin ice thickness from L-, C-, and X-band SAR. Importantly, small or moderate incidence angles should be chosen to avoid the effect of speckle noise.展开更多
Microstructure evolution during the homogenization heat treatment of an Al?Mg?Si?Fe?Mn(AA6xxx)alloy wasinvestigated using a combination of modelling and experimental studies.The model is based on the CALPHAD-coupledho...Microstructure evolution during the homogenization heat treatment of an Al?Mg?Si?Fe?Mn(AA6xxx)alloy wasinvestigated using a combination of modelling and experimental studies.The model is based on the CALPHAD-coupledhomogenization heat treatment model originally developed for AA3xxx alloys(i.e.,Al?Mn?Fe?Si).In this work,the model wasadapted to the more complex AA6xxx system(Al?Mg?Si?Mn?Fe)to predict the evolution of critical microstructural features suchas the spatial distribution of solute,the type and fraction of constituent particles and dispersoid number density and size distribution.Experiments were also conducted using three direct chill(DC)cast AA6xxx alloys with different Mn levels subjected to varioushomogenization treatments.The resulting microstructures were characterized using a range of techniques including scanning electronmicroscopy,electron microprobe analysis(EPMA),XRD,and electrical resistivity measurements.The model predictions werecompared with the experimental measurements,and reasonable agreement was found.展开更多
Both of chromium and zinc could appear as either minor impurities or alloying elements in recycled and commercial aluminum alloys, and they could have detrimental effects on the final product properties if not control...Both of chromium and zinc could appear as either minor impurities or alloying elements in recycled and commercial aluminum alloys, and they could have detrimental effects on the final product properties if not controlled in an appropriate way. A Kampmann-Wagner numerical modeling approach, built on the basis of computational thermodynamics and diffusion kinetics, is employed to investigate the effect of these two minor impurities on dispersoids precipitation during homogenization heat treatment of AA3xxx alloys. The simulation results obtained from different simulation set-ups were compared. The aim is to demonstrate that the modeling approach has the potential to guide the design or optimization of the chemical compositions and heat treatment parameters of aluminum alloys.展开更多
基金Supported by the Major Program of the National Natural Science Foundation of China(No.60890075)the National Natural Science Foundation of China for Young Scientists(No.40906093)
文摘Flat thin ice (<30 cm thick) is a common ice type in the Bohai Sea, China. Ice thickness detection is important to offshore exploration and marine transport in winter. Synthetic aperture radar (SAR) can be used to acquire sea ice data in all weather conditions, and it is a useful tool for monitoring sea ice conditions. In this paper, we combine a multi-layered sea ice electromagnetic (EM) scattering model with a sea ice thermodynamic model to assess the determination of the thickness of flat thin ice in the Bohai Sea using SAR at different frequencies, polarization, and incidence angles. Our modeling studies suggest that co-polarization backscattering coefficients and the co-polarized ratio can be used to retrieve the thickness of flat thin ice from C- and X-band SAR, while the co-polarized correlation coefficient can be used to retrieve flat thin ice thickness from L-, C-, and X-band SAR. Importantly, small or moderate incidence angles should be chosen to avoid the effect of speckle noise.
基金support from Rio Tinto AluminiumNSERC are gratefully acknowledged
文摘Microstructure evolution during the homogenization heat treatment of an Al?Mg?Si?Fe?Mn(AA6xxx)alloy wasinvestigated using a combination of modelling and experimental studies.The model is based on the CALPHAD-coupledhomogenization heat treatment model originally developed for AA3xxx alloys(i.e.,Al?Mn?Fe?Si).In this work,the model wasadapted to the more complex AA6xxx system(Al?Mg?Si?Mn?Fe)to predict the evolution of critical microstructural features suchas the spatial distribution of solute,the type and fraction of constituent particles and dispersoid number density and size distribution.Experiments were also conducted using three direct chill(DC)cast AA6xxx alloys with different Mn levels subjected to varioushomogenization treatments.The resulting microstructures were characterized using a range of techniques including scanning electronmicroscopy,electron microprobe analysis(EPMA),XRD,and electrical resistivity measurements.The model predictions werecompared with the experimental measurements,and reasonable agreement was found.
文摘Both of chromium and zinc could appear as either minor impurities or alloying elements in recycled and commercial aluminum alloys, and they could have detrimental effects on the final product properties if not controlled in an appropriate way. A Kampmann-Wagner numerical modeling approach, built on the basis of computational thermodynamics and diffusion kinetics, is employed to investigate the effect of these two minor impurities on dispersoids precipitation during homogenization heat treatment of AA3xxx alloys. The simulation results obtained from different simulation set-ups were compared. The aim is to demonstrate that the modeling approach has the potential to guide the design or optimization of the chemical compositions and heat treatment parameters of aluminum alloys.
