The heat transfer features around the elliptic cylinder of axis ratio 4∶1 in crossflow were investigated experimentally within a wide range of Reynolds number. By means of heat-mass transfer analogy and the naphthale...The heat transfer features around the elliptic cylinder of axis ratio 4∶1 in crossflow were investigated experimentally within a wide range of Reynolds number. By means of heat-mass transfer analogy and the naphthalene sublimation technique, the local heat transfer distribution and the mean heat transfer coefficient are clarified. The result shows that the mean heat transfer coefficient is higher than that of a circular cylinder in most Reynolds number range regarded, and this superiority turns to be more significant with the increase of flow speed. Moreover, the effect of axis ratio on mean heat transfer coefficient was investigated tentatively. The oil-lampblack technique was employed to enable visualization of the flow pattern around the cylinder and on the cylinder wall.展开更多
A set of numerical experiments is designed and carried out to understand a heat sink in the Southern Ocean in the recent hiatus decade. By using an oceanic general circulation model, the authors focus on the contribut...A set of numerical experiments is designed and carried out to understand a heat sink in the Southern Ocean in the recent hiatus decade. By using an oceanic general circulation model, the authors focus on the contributions from two types of forcing: wind stress and thermohaline forcing. The simulated results show that the heat sink in the upper Southern Ocean comes mainly from thermohaline forcing; while in the deeper layers, wind stress forcing also plays an important role. These different contributions may be due to different physical processes for the heat budget. The combination of these two types of forcing shows a significant heat sink in the Southern Ocean in the recent hiatus decade, and this is consistent with the observations and conclusions of a similar recently published study.展开更多
Molecular dynamics(MD)simulations and anisotropic thermal diffusion dynamics(ATD)simulations were performed on the wild TrpR and its 75 residue mutant(mTrpR)to investigate TrpR longrange effects.The ATD result shows t...Molecular dynamics(MD)simulations and anisotropic thermal diffusion dynamics(ATD)simulations were performed on the wild TrpR and its 75 residue mutant(mTrpR)to investigate TrpR longrange effects.The ATD result shows that the mTrpR has higher fluctuation than the wild TrpR,and its helix chainⅡF has particular disorder.It is obvious that the 75 residue of wild TrpR and mTrpR affects the protein dynamics flexibilities by the long-range effects.The ATD and MD both confirm that the differences in the size of side-chain and three-dimensional structures of two different 75 residues in the wild TrpR and mTrpR will spread to the entire protein by way of the long-range effects.Long-range effect affects the protein side chain interaction,conformational changes,flexibilities and secondary structures.Further,the ATD result also shows that each 75 residue of the symmetric homodimer has the same effect,and the two 75 residues have a positive correlation in long-range regulating processes.The residues 48,50,71,79 in chainⅠof wild TrpR and residues 45,72,80 in chainⅡof mTrpR play important roles in long-range interaction processes.展开更多
CFD has penetrated into the field of electronic cooling for some time. Both parallel and staggered plate fin heatsinks are widely used in modern computers. This paper presents the ways to make most use of CFD in optim...CFD has penetrated into the field of electronic cooling for some time. Both parallel and staggered plate fin heatsinks are widely used in modern computers. This paper presents the ways to make most use of CFD in optimization design of those heatsinks: the flow and heat transfer of staggered and parallel plate fm heatsinks of various geometry were simulated by using Fluent 5.0 commercial CFD code. Based on 60 different simulation solutions, two correlations, concerning Nusselt number and friction factor as the functions of geometrical and operational parameters of the heatsinks were developed. The presentation parameter examination was also performed by comparing the numerical solutions with the analytical solutions of parallel plate arrays, showing that the correct parameters are used in the correlations.展开更多
文摘The heat transfer features around the elliptic cylinder of axis ratio 4∶1 in crossflow were investigated experimentally within a wide range of Reynolds number. By means of heat-mass transfer analogy and the naphthalene sublimation technique, the local heat transfer distribution and the mean heat transfer coefficient are clarified. The result shows that the mean heat transfer coefficient is higher than that of a circular cylinder in most Reynolds number range regarded, and this superiority turns to be more significant with the increase of flow speed. Moreover, the effect of axis ratio on mean heat transfer coefficient was investigated tentatively. The oil-lampblack technique was employed to enable visualization of the flow pattern around the cylinder and on the cylinder wall.
基金supported by the National Natural Science Foundation of China (Grant No. 41175058)the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDA11010404)
文摘A set of numerical experiments is designed and carried out to understand a heat sink in the Southern Ocean in the recent hiatus decade. By using an oceanic general circulation model, the authors focus on the contributions from two types of forcing: wind stress and thermohaline forcing. The simulated results show that the heat sink in the upper Southern Ocean comes mainly from thermohaline forcing; while in the deeper layers, wind stress forcing also plays an important role. These different contributions may be due to different physical processes for the heat budget. The combination of these two types of forcing shows a significant heat sink in the Southern Ocean in the recent hiatus decade, and this is consistent with the observations and conclusions of a similar recently published study.
基金supported by the Innovation project of Henan Agricultural University(No.30600982)PhD Start-up Foundation of Henan Agricultural University(30600780)2023 Instrument Operator Capability lmprovement Project(SYS2023T04)
文摘Molecular dynamics(MD)simulations and anisotropic thermal diffusion dynamics(ATD)simulations were performed on the wild TrpR and its 75 residue mutant(mTrpR)to investigate TrpR longrange effects.The ATD result shows that the mTrpR has higher fluctuation than the wild TrpR,and its helix chainⅡF has particular disorder.It is obvious that the 75 residue of wild TrpR and mTrpR affects the protein dynamics flexibilities by the long-range effects.The ATD and MD both confirm that the differences in the size of side-chain and three-dimensional structures of two different 75 residues in the wild TrpR and mTrpR will spread to the entire protein by way of the long-range effects.Long-range effect affects the protein side chain interaction,conformational changes,flexibilities and secondary structures.Further,the ATD result also shows that each 75 residue of the symmetric homodimer has the same effect,and the two 75 residues have a positive correlation in long-range regulating processes.The residues 48,50,71,79 in chainⅠof wild TrpR and residues 45,72,80 in chainⅡof mTrpR play important roles in long-range interaction processes.
文摘CFD has penetrated into the field of electronic cooling for some time. Both parallel and staggered plate fin heatsinks are widely used in modern computers. This paper presents the ways to make most use of CFD in optimization design of those heatsinks: the flow and heat transfer of staggered and parallel plate fm heatsinks of various geometry were simulated by using Fluent 5.0 commercial CFD code. Based on 60 different simulation solutions, two correlations, concerning Nusselt number and friction factor as the functions of geometrical and operational parameters of the heatsinks were developed. The presentation parameter examination was also performed by comparing the numerical solutions with the analytical solutions of parallel plate arrays, showing that the correct parameters are used in the correlations.
