丹东港修船坞水泵房通风设计

根据丹东港船坞水泵房的面积、设备数量、室内外设计参数等条件，进行水泵房散热量、通风量的计算，并确定水泵房的通风、除湿方案。

Performances of Flat Plate Pulsating Heat Pipes

Flat plate pulsating heat pipe is useful for hot spot heat spreader. Two kinds of flat plate spreader of pulsating heat pipe are designed, fabricated and experimented. For the embedded circular capillary type, the transferred heat flux could reach 32 W/cm2, the smallest thermal resistance for acetone, methanol and FC-72 were respectively 0.50, 0.57 and 0.40℃/W. While for the square capillary type, the transferred heat flux could reach 26 W/cm2, the equivalent thermal conductivity could reach 3211 W/（m. ℃）. There are ranges of optimal transferred power and filling ratio for different working liquid. If the transferred power is constant, changing the heating area and the place has little effects on the performance.

Estimating Evapotranspiration Using Improved Fractional Vegetation Cover and Land Surface Temperature Space

Vegetation index-land surface temperature （VI-T s ） space has been widely used to estimate evapotranspiration and soil moisture. The limitation of this method is the uncertainty of the observed dry edge, which is usually fitted by scatter plots. Here, a method was used to locate true dry and wet edges based on energy balance formulation, and a simple method to estimate surface energy flux is proposed based on the improved Fractional vegetation cover-Land surface temperature （F v -T s ） space. Seventeen days of MODIS products were selected to estimate evapotranspiration and the estimated sensible heat flux （H） is compared with Large Aperture Scintillometer （LAS） data at a site in Zhengzhou, resulting in a RMSE of 44.06 W m^-2 , bias of 36.99 W m^-2 and R^2 of 0.71. The H scatter plots of estimation versus observation show clearly that most points are around the 1：1 line. Overall, the located true and wet edges are more accurate than the observed true edge. Our results can also be applied to improve the estimation of soil moisture.

Graphene-based thermal modulators

The quest for materials and devices that are capable of controlling heat flux continues to fuel research on thermal controlling devices. In this letter, using molecular dynamics simulations, we demonstrate that a partially clamped singlelayer graphene can serve as a thermal modulator. The mismatch in phonon dispersion between the unclamped and clamped graphene sections results in phonon interface scattering, and the strength of interface scattering is tunable by controlling the clamp-graphene distance via applying the external pressure. Owing to the ultra-thin structure of graphene and its highly sensitive phonon dispersion to external physical interaction, the modulation efficiency--which is defined as the ratio of the highest to lowest heat flux-can reach as high as 150% at a moderate pressure of 50 GPa. This modulation efficiency can be further enhanced by arranging a number of clamps in series along the direction of the heat flux.

An improved algorithm to estimate the surface soil heat flux over a heterogeneous surface: A case study in the Heihe River Basin

Surface soil heat flux(G0) is an indispensable component of the surface energy balance and plays an important role in the estimation of surface evapotranspiration(ET). This study calculated G0 in the Heihe River Basin based on the thermal diffusion equation, using the observed soil temperature and moisture profiles, with the aim to analyze the spatial-temporal variations of G0 over the heterogeneous area(with alpine grassland, farmland, and forest). The soil ice content was estimated by the difference in liquid soil water content before and after the melting of the frozen soil and its impact on the calculation of G0 was further analyzed. The results show that:(1) the diurnal variation of G0 is obvious under different underlying surfaces in the Heihe River Basin, and the time when the daily maximum value of G0 occurs is a few minutes to several hours earlier than that of the net radiation flux, which is related to the soil texture, soil moisture, soil thermal properties, and the vegetation coverage;(2) the net radiation flux varies with season and reaches the maximum in summer and the minimum in winter, whereas G0 reaches the maximum in spring rather than in summer, because more vegetation in summer hinders energy transfer into the soil;(3) the proportions of G0 to the net radiation flux are different with seasons and surface types, and the mean values in January are 25.6% at the Arou site, 22.9% at the Yingke site and 4.3% at the Guantan site, whereas the values in July are 2.3%, 1.6% and 0.3%, respectively; and(4) G0 increases when the soil ice content is included in thermal diffusion equation, which improves the surface energy balance closure by 4.3%.

Stark-Chirped Rapid Adiabatic Passage in Presence of Dissipation for Quantum Computation

Stark-chirped rapid adiabatic passage(SCRAP) is an important technique used for coherent quantum controls. In this paper we investigate how the practically-existing dissipation of the system influences on the efficiency of the passage, and thus the fidelities of the SCRAP-based quantum gates. With flux-biased Josephson qubits as a specifical example, our results show clearly that the efficiency of the logic gates implemented by SCRAP are robust against the weak dissipation. The influence due to the non-adiabtic transitions between the adiabatic passages is comparatively significantly small. Therefore, the SCRAP-based logic gates should be feasible for the realistic physical systems with noises.