Using ANSYS-CFX, a general purpose fluid dynamics program, the vortex-induced vibration(VIV) of a variable cross-section cylinder is simulated under uniform current with high Reynolds numbers. Large eddy simulation(LE...Using ANSYS-CFX, a general purpose fluid dynamics program, the vortex-induced vibration(VIV) of a variable cross-section cylinder is simulated under uniform current with high Reynolds numbers. Large eddy simulation(LES) is conducted for studying the fluid-structure interaction. The vortex shedding in the wake, the motion trajectories of a cylinder, the variation of drag and lift forces on the cylinder are analyzed. The results show that the vortices of variable cross-section cylinder are chaotic and are varying along the cylinder. In places where cross-sections are changing significantly, the vortices are more irregular. The motion trail of the cylinder is almost the same but irregular. The drag and lift coefficients of the cylinder are varying with the changes of diameters.展开更多
The present work focuses on experimental and numerical investigations of the augmentation of turbulent flow heat transfer in a horizontal circular tube by means of mesh inserts with air as the working fluid. Sixteen t...The present work focuses on experimental and numerical investigations of the augmentation of turbulent flow heat transfer in a horizontal circular tube by means of mesh inserts with air as the working fluid. Sixteen types of mesh inserts with screen diameters of 22 mm, 18 mm, 14 mm and 10 mm for varying distance between the screens of 50 mm, 100 mm, 150 mm and 200 mm in the porosity range of 99.73 to 99.98 were considered for experimentation. The horizontal tube was subjected to constant and uniform heat flux. The Reynolds number varied from 7,000 to 14,000. The results are compared with the clear flow case when no porous material was used. Computational fluid dynamics （CFD） techniques were also employed to perform optimization analysis of the mesh inserts. The horizontal tube along with mesh inserts was modeled in Gambit 2.2.30 with fine meshing and analyzed using FLUENT 6.2.16. CFD analysis was performed initially for plain tube and the results are compared with experimental values for validation.展开更多
This paper focuses on numerical simulations of bluff body aerodynamics with three-dimensional CFD(computational fluid dynamics) modeling,where a computational scheme for fluid-structure interactions is implemented.The...This paper focuses on numerical simulations of bluff body aerodynamics with three-dimensional CFD(computational fluid dynamics) modeling,where a computational scheme for fluid-structure interactions is implemented.The choice of an appropriate turbulence model for the computational modeling of bluff body aerodynamics using both two-dimensional and three-dimensional CFD numerical simulations is also considered.An efficient mesh control method which employs the mesh deformation technique is proposed to achieve better simulation results.Several long-span deck sections are chosen as examples which were stationary and pitching at a high Reynolds number.With the proposed CFD method and turbulence models,the force coefficients and flutter derivatives thus obtained are compared with the experimental measurement results and computed values completely from commercial software.Finally,a discussion on the effects of oscillation amplitude on the flutter instability of a bluff body is carried out with extended numerical simulations.These numerical analysis results demonstrate that the proposed three-dimensional CFD method,with proper turbulence modeling,has good accuracy and significant benefits for aerodynamic analysis and computational FSI studies of bluff bodies.展开更多
In this paper,the CFD simulation and new flow unsteadiness analysis for a single-blade centrifugal pump with whole flow passage were carried out.The periodic flow unsteadiness has been quantitatively investigated in d...In this paper,the CFD simulation and new flow unsteadiness analysis for a single-blade centrifugal pump with whole flow passage were carried out.The periodic flow unsteadiness has been quantitatively investigated in detail by defining unsteady intensity and turbulence intensity in both rotor and volute domains under design condition Q=33 L s 1.The results show that the distributions of flow unsteadiness are the functions of impeller rotating angle and have complex unsteady characteristics.The obvious T u fluctuations can be also observed for different impeller positions.In addition,time-averaged unsteady intensity and time-averaged turbulence intensity were calculated by averaging the results of each mesh node for entire impeller revolution period to evaluate the strength distributions of flow unsteadiness directly and comprehensively.The accumulative results of an impeller revolution can directly show the positions and strength of the flow unsteadiness and turbulence intensity in both rotor and stator domains which can be an important aspect to be considered in the single-blade pump optimum design procedure for obtaining more stable inner flow of the pump and decreasing flow-induced vibration and noise.The flow unsteadiness in the side chamber cannot be neglected for an accurate prediction of the inner flow of the pump,and the optimizing design procedure for a single-blade pump impeller will not be accurate using CFD tool if the unsteady flow phenomenon in the side chamber is not considered.展开更多
基金supported by the National Natural Science Foundation of China (Nos. 51179179 and 51079136)
文摘Using ANSYS-CFX, a general purpose fluid dynamics program, the vortex-induced vibration(VIV) of a variable cross-section cylinder is simulated under uniform current with high Reynolds numbers. Large eddy simulation(LES) is conducted for studying the fluid-structure interaction. The vortex shedding in the wake, the motion trajectories of a cylinder, the variation of drag and lift forces on the cylinder are analyzed. The results show that the vortices of variable cross-section cylinder are chaotic and are varying along the cylinder. In places where cross-sections are changing significantly, the vortices are more irregular. The motion trail of the cylinder is almost the same but irregular. The drag and lift coefficients of the cylinder are varying with the changes of diameters.
文摘The present work focuses on experimental and numerical investigations of the augmentation of turbulent flow heat transfer in a horizontal circular tube by means of mesh inserts with air as the working fluid. Sixteen types of mesh inserts with screen diameters of 22 mm, 18 mm, 14 mm and 10 mm for varying distance between the screens of 50 mm, 100 mm, 150 mm and 200 mm in the porosity range of 99.73 to 99.98 were considered for experimentation. The horizontal tube was subjected to constant and uniform heat flux. The Reynolds number varied from 7,000 to 14,000. The results are compared with the clear flow case when no porous material was used. Computational fluid dynamics （CFD） techniques were also employed to perform optimization analysis of the mesh inserts. The horizontal tube along with mesh inserts was modeled in Gambit 2.2.30 with fine meshing and analyzed using FLUENT 6.2.16. CFD analysis was performed initially for plain tube and the results are compared with experimental values for validation.
基金supported by the National Natural Science Foundation of China(Grant No.11172055)the Foundation for the Author of National Excellent Doctoral(Grant No.2002030)
文摘This paper focuses on numerical simulations of bluff body aerodynamics with three-dimensional CFD(computational fluid dynamics) modeling,where a computational scheme for fluid-structure interactions is implemented.The choice of an appropriate turbulence model for the computational modeling of bluff body aerodynamics using both two-dimensional and three-dimensional CFD numerical simulations is also considered.An efficient mesh control method which employs the mesh deformation technique is proposed to achieve better simulation results.Several long-span deck sections are chosen as examples which were stationary and pitching at a high Reynolds number.With the proposed CFD method and turbulence models,the force coefficients and flutter derivatives thus obtained are compared with the experimental measurement results and computed values completely from commercial software.Finally,a discussion on the effects of oscillation amplitude on the flutter instability of a bluff body is carried out with extended numerical simulations.These numerical analysis results demonstrate that the proposed three-dimensional CFD method,with proper turbulence modeling,has good accuracy and significant benefits for aerodynamic analysis and computational FSI studies of bluff bodies.
基金supported by the National Outstanding Young Scientists Founds of China (Grant No. 50825902)Jiangsu Provincial Project for Innovative Postgraduates of China (Grant No.CX10B_262Z)
文摘In this paper,the CFD simulation and new flow unsteadiness analysis for a single-blade centrifugal pump with whole flow passage were carried out.The periodic flow unsteadiness has been quantitatively investigated in detail by defining unsteady intensity and turbulence intensity in both rotor and volute domains under design condition Q=33 L s 1.The results show that the distributions of flow unsteadiness are the functions of impeller rotating angle and have complex unsteady characteristics.The obvious T u fluctuations can be also observed for different impeller positions.In addition,time-averaged unsteady intensity and time-averaged turbulence intensity were calculated by averaging the results of each mesh node for entire impeller revolution period to evaluate the strength distributions of flow unsteadiness directly and comprehensively.The accumulative results of an impeller revolution can directly show the positions and strength of the flow unsteadiness and turbulence intensity in both rotor and stator domains which can be an important aspect to be considered in the single-blade pump optimum design procedure for obtaining more stable inner flow of the pump and decreasing flow-induced vibration and noise.The flow unsteadiness in the side chamber cannot be neglected for an accurate prediction of the inner flow of the pump,and the optimizing design procedure for a single-blade pump impeller will not be accurate using CFD tool if the unsteady flow phenomenon in the side chamber is not considered.
