This study used Corona KH-4A and Advanced Land Observing Satellite (ALOS) PRISM images to generate digital terrain models (DTMs) of the distal part of Imja Glacier,where a few supraglacial ponds (～0.07 km 2) expanded...This study used Corona KH-4A and Advanced Land Observing Satellite (ALOS) PRISM images to generate digital terrain models (DTMs) of the distal part of Imja Glacier,where a few supraglacial ponds (～0.07 km 2) expanded into the large Imja Glacier Lake (Imja Tsho,～0.91 km 2) between 1964 and 2006.DTMs and subsequently derived topographical maps with contour intervals of 1 m were created from the high-resolution images (Corona in 1964 and ALOS in 2006) in the Leica Photogrammetric Suite (LPS) platform.The DTMs and topographic maps provided excellent representation of the elevation and micro-topography of the glacier surface,such as its supra-glacial ponds/lake,surface depressions,and moraine ridges,with an error of about +/-4 m (maximum).The DTMs produced from the Corona and ALOS PRISM images are suitable for use in studies of the surface change of glaciers.The topographical maps produced from the Corona data (1964) showed that part of the dead ice in the down-glacier area was even higher than the top of the lateral moraine ridges,while the glacier surface in the up-glacier area was noticeably lower than the moraine crests.This suggests more extensive melting of glacier ice in the up-glacier area before 1964.The average lowering of the glacier surface from 1964 to 2006 was 16.9 m for the dead-ice area west of the lake and 47.4 m for the glacier surface east of the lake;between 1964 and 2002,the lake surface lowered by 82.3 m.These figures represent average lowering rates of 0.4,1.1,and 2.2 m/year for the respective areas.展开更多
Dam-break analysis is of great importance in mountain environment,especially where reservoirs are located upstream of densely populated areas and hydraulic hazard should be assessed for land planning purposes.Accordin...Dam-break analysis is of great importance in mountain environment,especially where reservoirs are located upstream of densely populated areas and hydraulic hazard should be assessed for land planning purposes.Accordingly,there is a need to identify suitable operative tools which may differ from the ones used in flat flood-prone areas.This paper shows the results provided by a 1D and a 2D model based on the Shallow Water Equations(SWE) for dam-break wave propagation in alpine regions.The 1D model takes advantage of a topographic toolkit that includes an algorithm for pre-processing the Digital Elevation Model(DEM) and of a novel criterion for the automatic cross-section space refinement.The 2D model is FLO-2D,a commercial software widely used for flood routing in mountain areas.In order to verify the predictive effectiveness of these numerical models,the test case of the Cancano dam-break has been recovered from the historical study of De Marchi(1945),which provides a unique laboratory data set concerning the consequences of the potential collapse of the former Cancano dam(Northern Italy).The measured discharge hydrograph at the dam also provides the data to test a simplified method recently proposed for the characterization of the hydrograph following a sudden dam-break.展开更多
In this paper, an attempt to analyse landslide hazard and vulnerability in the municipality of Pahuatlfin, Puebla, Mexico, is presented. In order to estimate landslide hazard, the susceptibility, magnitude （area-velo...In this paper, an attempt to analyse landslide hazard and vulnerability in the municipality of Pahuatlfin, Puebla, Mexico, is presented. In order to estimate landslide hazard, the susceptibility, magnitude （area-velocity ratio） and landslide frequency of the area of interest were produced based on information derived from a geomorphological landslide inventory; the latter was generated by using very high resolution satellite stereo pairs along with information derived from other sources （Google Earth, aerial photographs and historical information）. Estimations of landslide susceptibility were determined by combining four statistical techniques： （i） logistic regression, （ii） quadratic discriminant analysis, （iii） linear discriminant analysis, and （iv） neuronal networks. A Digital Elevation Model （DEM） of lo m spatial resolution was used to extract the slope angle, aspect, curvature, elevation and relief. These factors, in addition to land cover, lithology anddistance to faults, were used as explanatory variables for the susceptibility models. Additionally, a Poisson model was used to estimate landslide temporal frequency, at the same time as landslide magnitude was obtained by using the relationship between landslide area and the velocity of movements. Then, due to the complexity of evaluating it, vulnerability of population was analysed by applying the Spatial Approach to Vulnerability Assessment （SAVE） model which considered levels of exposure, sensitivity and lack of resilience. Results were expressed on maps on which different spatial patterns of levels of landslide hazard and vulnerability were found for the inhabited areas. It is noteworthy that the lack of optimal methodologies to estimate and quantify vulnerability is more notorious than that of hazard assessments. Consequently, levels of uncertainty linked to landslide risk assessment remain a challenge to be addressed.展开更多
This article describes model of human eye fluctuations such as refraction etc. and makes its physical interpretation. Because mistakes in refraction measurements correspond to fluctuations in eye＇s focus, it is possi...This article describes model of human eye fluctuations such as refraction etc. and makes its physical interpretation. Because mistakes in refraction measurements correspond to fluctuations in eye＇s focus, it is possible to calculate theoretical limits for the best accuracy in measurements of eye＇s refraction （0.25-0.3 D）. Optical model for astigmatic human eye predicts possibility only 70% compensation of visual acuity by cylindrical glasses. New data and methods for digital measuring of color and gray vision were tested, too. Also ,some new results and model for periphery color and grey vision were proposed and discussed.展开更多
基金the Japan Science Society (Sasagawa Research Fund)the Global Centre of Excellence (GCOE) programme by JSPS for partial funding
文摘This study used Corona KH-4A and Advanced Land Observing Satellite (ALOS) PRISM images to generate digital terrain models (DTMs) of the distal part of Imja Glacier,where a few supraglacial ponds (～0.07 km 2) expanded into the large Imja Glacier Lake (Imja Tsho,～0.91 km 2) between 1964 and 2006.DTMs and subsequently derived topographical maps with contour intervals of 1 m were created from the high-resolution images (Corona in 1964 and ALOS in 2006) in the Leica Photogrammetric Suite (LPS) platform.The DTMs and topographic maps provided excellent representation of the elevation and micro-topography of the glacier surface,such as its supra-glacial ponds/lake,surface depressions,and moraine ridges,with an error of about +/-4 m (maximum).The DTMs produced from the Corona and ALOS PRISM images are suitable for use in studies of the surface change of glaciers.The topographical maps produced from the Corona data (1964) showed that part of the dead ice in the down-glacier area was even higher than the top of the lateral moraine ridges,while the glacier surface in the up-glacier area was noticeably lower than the moraine crests.This suggests more extensive melting of glacier ice in the up-glacier area before 1964.The average lowering of the glacier surface from 1964 to 2006 was 16.9 m for the dead-ice area west of the lake and 47.4 m for the glacier surface east of the lake;between 1964 and 2002,the lake surface lowered by 82.3 m.These figures represent average lowering rates of 0.4,1.1,and 2.2 m/year for the respective areas.
基金developed within the European Project Kulturisk (Grant agreement 265280)
文摘Dam-break analysis is of great importance in mountain environment,especially where reservoirs are located upstream of densely populated areas and hydraulic hazard should be assessed for land planning purposes.Accordingly,there is a need to identify suitable operative tools which may differ from the ones used in flat flood-prone areas.This paper shows the results provided by a 1D and a 2D model based on the Shallow Water Equations(SWE) for dam-break wave propagation in alpine regions.The 1D model takes advantage of a topographic toolkit that includes an algorithm for pre-processing the Digital Elevation Model(DEM) and of a novel criterion for the automatic cross-section space refinement.The 2D model is FLO-2D,a commercial software widely used for flood routing in mountain areas.In order to verify the predictive effectiveness of these numerical models,the test case of the Cancano dam-break has been recovered from the historical study of De Marchi(1945),which provides a unique laboratory data set concerning the consequences of the potential collapse of the former Cancano dam(Northern Italy).The measured discharge hydrograph at the dam also provides the data to test a simplified method recently proposed for the characterization of the hydrograph following a sudden dam-break.
基金CONACyT for financial support for the research project 156242for providing a post-graduate scholarship
文摘In this paper, an attempt to analyse landslide hazard and vulnerability in the municipality of Pahuatlfin, Puebla, Mexico, is presented. In order to estimate landslide hazard, the susceptibility, magnitude （area-velocity ratio） and landslide frequency of the area of interest were produced based on information derived from a geomorphological landslide inventory; the latter was generated by using very high resolution satellite stereo pairs along with information derived from other sources （Google Earth, aerial photographs and historical information）. Estimations of landslide susceptibility were determined by combining four statistical techniques： （i） logistic regression, （ii） quadratic discriminant analysis, （iii） linear discriminant analysis, and （iv） neuronal networks. A Digital Elevation Model （DEM） of lo m spatial resolution was used to extract the slope angle, aspect, curvature, elevation and relief. These factors, in addition to land cover, lithology anddistance to faults, were used as explanatory variables for the susceptibility models. Additionally, a Poisson model was used to estimate landslide temporal frequency, at the same time as landslide magnitude was obtained by using the relationship between landslide area and the velocity of movements. Then, due to the complexity of evaluating it, vulnerability of population was analysed by applying the Spatial Approach to Vulnerability Assessment （SAVE） model which considered levels of exposure, sensitivity and lack of resilience. Results were expressed on maps on which different spatial patterns of levels of landslide hazard and vulnerability were found for the inhabited areas. It is noteworthy that the lack of optimal methodologies to estimate and quantify vulnerability is more notorious than that of hazard assessments. Consequently, levels of uncertainty linked to landslide risk assessment remain a challenge to be addressed.
文摘This article describes model of human eye fluctuations such as refraction etc. and makes its physical interpretation. Because mistakes in refraction measurements correspond to fluctuations in eye＇s focus, it is possible to calculate theoretical limits for the best accuracy in measurements of eye＇s refraction （0.25-0.3 D）. Optical model for astigmatic human eye predicts possibility only 70% compensation of visual acuity by cylindrical glasses. New data and methods for digital measuring of color and gray vision were tested, too. Also ,some new results and model for periphery color and grey vision were proposed and discussed.
