In this paper, the numerical simulation bias of the non-hydrostatic version GRAPES-Meso （Mesoscalc of the Global and Regional Assimilation and Prediction System） at the resolution of 0.18° for a torrential rain...In this paper, the numerical simulation bias of the non-hydrostatic version GRAPES-Meso （Mesoscalc of the Global and Regional Assimilation and Prediction System） at the resolution of 0.18° for a torrential rain case, which happened in May 31st to June 1st 2005 over Hunan province, are diagnosed and investigated by using the radiosondes, intensive surface observation, and the operational global analysis data, and the sensitivity experimental results as well. It is shown in the result that the GRAPES-Meso could reproduce quite well the main features of large-scale circulation and the distribution of the accumulated 24h precipitation and the key locations of tile torrential rainfall arc captured reasonably well by the model. I fowever, bias exist in the simulation of the mesoscale features of the torrential rain and details of the relevant systems. for example, the simulated rainfall that is too earlier in model integration and remsrkable. underpredictien of the peak value of rainfall rates over the heaviest rainfall region, the weakness of the upper jet siimulation and the overpredietion of the south-west wind in the lower troposphere etc. The investigation reveals that the sources of the simulation bias are different. The erroneous model rainfall in the earlier integration stage over the heaviest rainfall region is induced by the model initial condition bias of the wind field at ablaut 925hPa over the torrential rainfall region, where the bias grow rapidly and spread upward to about 600hPa level within the few hours into the integration and result in abnormal convergence of the wind and moisture, and thus the unreal rainfall over that region. The large bias on the simulated rainfall intensity over the heaviest rainfall region might be imputed to the following combined facters of（1） the simulation bias on the strength and detailed structures of the upper-level jet core which bring about significant, underpredictions of the dynamic conditions （including upper-level divergence and the up,yard motion for heavy rainfalt due to unfavorable mesoscale vertical coupting between the strong, upper-level divergence and Iower-level convergence; and （2） the inefficient coupling of the cumulous parameterzation scheme and the explicit moisture in the integration, which causes the failure of the explicit moisture scheme in generating grid-scale rainfall in a certain extent through inadequate convective adjustmenl and feedback to the grid-scale, In addition, the interaction of the combined two factors could form a negative feedback to the rainfall intensity simulation, and eventually lead to the obvious undcrprediction of the rainfall rate.展开更多
The coal-gas existing condition was ameliorated in the coal seams prone to coal-gas outburst adopting the mining method of protective strata.The gas volume and the gas pressure were reduced synchronously in the protec...The coal-gas existing condition was ameliorated in the coal seams prone to coal-gas outburst adopting the mining method of protective strata.The gas volume and the gas pressure were reduced synchronously in the protected coal seam,and the coal seam of high permeability prone to the coal-gas outburst was changed into that of low perme- ability with no proneness to the coal-gas outburst.The D_(15)coal seam was treated as the protective strata,and the D_(16-17)coal seam was treated as the protected strata in the Fifth coal mine in the Pingdingshan Coal Mining Group.The distance between the two coal seams was 5 m averagely,clarified into the extreme short-range protective strata.The numerical analysis was based on the theory of the porous media flow with the finite ele- ment method.The gas flow process and the change mechanism of the coal-gas pressure were analyzed in the process of mining the protective strata.展开更多
Solid waste dumping is a hectic problem in urban and developing areas due to shortage of land for the purpose. The main objective of this study was to select potential areas for suitable solid waste dumping for Kajiad...Solid waste dumping is a hectic problem in urban and developing areas due to shortage of land for the purpose. The main objective of this study was to select potential areas for suitable solid waste dumping for Kajiado County, Kenya. Eight input map layers including DEM （digital elevation model）, topography, urban settlement, roads, wetlands, rivers, forests and protected areas were prepared and MCDA （Multi Criteria Decision Analysis Methods） were implemented in a GIS （geographic information systems） environment. GIS, RS （remote sensing） and MDCA are powerful tools which can effectively be applied during the planning phase of solid waste management in order to avoid adverse catastrophes in future. The final suitability map was prepared by weighted overlay analyses and leveled as the most suitable, moderate suitable, less suitable and unsuitable areas. The area of each suitability level was calculated using spatial statistics. Polygons representing the most suitable sites were further analyzed in terms of area perimeter ratio in order to investigate the most suitable areas in terms of shape regularity. The leading four polygons considered were marked A, B, C, D respectively in the final map. This study showed that suitable areas for solid waste landfills were limited and scattered in the study area.展开更多
Today, digital signal processing based on new microprocessor technology allows for successful machine protection and is acceptably cost-effective. Furthermore, by means of vibration-diagnostics monitoring of machines ...Today, digital signal processing based on new microprocessor technology allows for successful machine protection and is acceptably cost-effective. Furthermore, by means of vibration-diagnostics monitoring of machines assisted by analytical methods it is possible to monitor and quantify dynamic parameters of a machine. By means of the analysis of dynamic behavior of rotor, it is possible to diagnose and solve the defects relating to rotor and other parts of machine. Recently, vibrations analysis and monitoring have become the most widespread method of machine diagnostics. Detection, identification and elimination of problems related to machine work can be simplified by modeling some dynamics solutions. The paper presents a mathematical model of elastic rotor with concentrated weight designed for the purpose of detecting defects with the help of vibrations measured by sensors based in bearings. Experimental results from test tables of the world＇s leading company, Bentley Nevada Co. USA, were used as the basis for development of this model. Accordingly, mathematical model for most of the cases was based on radial oscillation of rotor while torsion oscillations were used as the basis in some cases. Torsion vibrations cannot be detected without special sensors even at their highest magnitudes. Reliability of this model and accuracy of vibrodiagnostic analysis has been experimentally confirmed when applied on machines in operation.展开更多
The source parameters of the Yingjiang earthquake sequences in 2008 are obtained by applying spectral analysis and Brunes source model,based on the digital waveform data recorded by the Yunnan Digital Seismic Network....The source parameters of the Yingjiang earthquake sequences in 2008 are obtained by applying spectral analysis and Brunes source model,based on the digital waveform data recorded by the Yunnan Digital Seismic Network.The correlation coefficients are calculated using the low-frequency spectral amplitudes of 2 events recorded by a same station,then,events with similar focal mechanism are grouped using the clustering analysis method.Compared to the obtained focal mechanisms,it is found that there are good correlations with the azimuth of P axes in each clustering group,and the larger the correlation coefficient,the closer the azimuths of P axes.We divide the Yingjiang area into 3 regions to analyze the stress level and stress direction by combining the source parameters and the mean focal mechanism of each group.The results show:The change and transformation of the focal mechanism types at different stages can represent the temporal characteristics of the regional stress field.If the earthquake focal mechanism types are concentrated in a time period and switch to the direction of regional stress field,it may be a sign of strong earthquake.There is some relationship between the stress drop and the type of focal mechanism.Those earthquakes with stress fields revealed by focal mechanism types closer to the regional tectonic stress field will have higher stress drop,while those with the focal mechanism-revealed stress fields differing a lot from the regional tectonic stress field will generally have a lower stress drop.展开更多
By means of a method of analytic number theory the following theorem is proved. Letp be a quasi-homogeneous linear partial differential operator with degreem,m > 0, w.r.t a dilation $\left\{ {\delta _\tau } \right\...By means of a method of analytic number theory the following theorem is proved. Letp be a quasi-homogeneous linear partial differential operator with degreem,m > 0, w.r.t a dilation $\left\{ {\delta _\tau } \right\}{\text{ }}_{\tau< 0} $ given by ( a1, …, an). Assume that either a1, …, an are positive rational numbers or $m{\text{ = }}\sum\limits_{j = 1}^n {\alpha _j \alpha _j } $ for some $\alpha {\text{ = }}\left( {\alpha _1 ,{\text{ }} \ldots {\text{ }},\alpha _n } \right) \in l _ + ^n $ Then the dimension of the space of polynomial solutions of the equationp[u] = 0 on ?n must be infinite展开更多
基金Research into the Theories and Methods for the Monitoring and Prediction of Flood-InflictingTorrential Rains in Southern China - one of Project "973"Study on the Development of Numerical PredictionModels for High-Resolution, Non-Hydrostatic Mesoscale Torrential Rains and Their Prediction Systems
文摘In this paper, the numerical simulation bias of the non-hydrostatic version GRAPES-Meso （Mesoscalc of the Global and Regional Assimilation and Prediction System） at the resolution of 0.18° for a torrential rain case, which happened in May 31st to June 1st 2005 over Hunan province, are diagnosed and investigated by using the radiosondes, intensive surface observation, and the operational global analysis data, and the sensitivity experimental results as well. It is shown in the result that the GRAPES-Meso could reproduce quite well the main features of large-scale circulation and the distribution of the accumulated 24h precipitation and the key locations of tile torrential rainfall arc captured reasonably well by the model. I fowever, bias exist in the simulation of the mesoscale features of the torrential rain and details of the relevant systems. for example, the simulated rainfall that is too earlier in model integration and remsrkable. underpredictien of the peak value of rainfall rates over the heaviest rainfall region, the weakness of the upper jet siimulation and the overpredietion of the south-west wind in the lower troposphere etc. The investigation reveals that the sources of the simulation bias are different. The erroneous model rainfall in the earlier integration stage over the heaviest rainfall region is induced by the model initial condition bias of the wind field at ablaut 925hPa over the torrential rainfall region, where the bias grow rapidly and spread upward to about 600hPa level within the few hours into the integration and result in abnormal convergence of the wind and moisture, and thus the unreal rainfall over that region. The large bias on the simulated rainfall intensity over the heaviest rainfall region might be imputed to the following combined facters of（1） the simulation bias on the strength and detailed structures of the upper-level jet core which bring about significant, underpredictions of the dynamic conditions （including upper-level divergence and the up,yard motion for heavy rainfalt due to unfavorable mesoscale vertical coupting between the strong, upper-level divergence and Iower-level convergence; and （2） the inefficient coupling of the cumulous parameterzation scheme and the explicit moisture in the integration, which causes the failure of the explicit moisture scheme in generating grid-scale rainfall in a certain extent through inadequate convective adjustmenl and feedback to the grid-scale, In addition, the interaction of the combined two factors could form a negative feedback to the rainfall intensity simulation, and eventually lead to the obvious undcrprediction of the rainfall rate.
基金the Grants of National Scientific Funds of Control Mechanism of Geologic Hazards Induced by Coal-gas(50534070)
文摘The coal-gas existing condition was ameliorated in the coal seams prone to coal-gas outburst adopting the mining method of protective strata.The gas volume and the gas pressure were reduced synchronously in the protected coal seam,and the coal seam of high permeability prone to the coal-gas outburst was changed into that of low perme- ability with no proneness to the coal-gas outburst.The D_(15)coal seam was treated as the protective strata,and the D_(16-17)coal seam was treated as the protected strata in the Fifth coal mine in the Pingdingshan Coal Mining Group.The distance between the two coal seams was 5 m averagely,clarified into the extreme short-range protective strata.The numerical analysis was based on the theory of the porous media flow with the finite ele- ment method.The gas flow process and the change mechanism of the coal-gas pressure were analyzed in the process of mining the protective strata.
文摘Solid waste dumping is a hectic problem in urban and developing areas due to shortage of land for the purpose. The main objective of this study was to select potential areas for suitable solid waste dumping for Kajiado County, Kenya. Eight input map layers including DEM （digital elevation model）, topography, urban settlement, roads, wetlands, rivers, forests and protected areas were prepared and MCDA （Multi Criteria Decision Analysis Methods） were implemented in a GIS （geographic information systems） environment. GIS, RS （remote sensing） and MDCA are powerful tools which can effectively be applied during the planning phase of solid waste management in order to avoid adverse catastrophes in future. The final suitability map was prepared by weighted overlay analyses and leveled as the most suitable, moderate suitable, less suitable and unsuitable areas. The area of each suitability level was calculated using spatial statistics. Polygons representing the most suitable sites were further analyzed in terms of area perimeter ratio in order to investigate the most suitable areas in terms of shape regularity. The leading four polygons considered were marked A, B, C, D respectively in the final map. This study showed that suitable areas for solid waste landfills were limited and scattered in the study area.
文摘Today, digital signal processing based on new microprocessor technology allows for successful machine protection and is acceptably cost-effective. Furthermore, by means of vibration-diagnostics monitoring of machines assisted by analytical methods it is possible to monitor and quantify dynamic parameters of a machine. By means of the analysis of dynamic behavior of rotor, it is possible to diagnose and solve the defects relating to rotor and other parts of machine. Recently, vibrations analysis and monitoring have become the most widespread method of machine diagnostics. Detection, identification and elimination of problems related to machine work can be simplified by modeling some dynamics solutions. The paper presents a mathematical model of elastic rotor with concentrated weight designed for the purpose of detecting defects with the help of vibrations measured by sensors based in bearings. Experimental results from test tables of the world＇s leading company, Bentley Nevada Co. USA, were used as the basis for development of this model. Accordingly, mathematical model for most of the cases was based on radial oscillation of rotor while torsion oscillations were used as the basis in some cases. Torsion vibrations cannot be detected without special sensors even at their highest magnitudes. Reliability of this model and accuracy of vibrodiagnostic analysis has been experimentally confirmed when applied on machines in operation.
基金funded under the National Science and Technology Support Program of the 12th "Five-year Plan",China(2012BAK19B02)
文摘The source parameters of the Yingjiang earthquake sequences in 2008 are obtained by applying spectral analysis and Brunes source model,based on the digital waveform data recorded by the Yunnan Digital Seismic Network.The correlation coefficients are calculated using the low-frequency spectral amplitudes of 2 events recorded by a same station,then,events with similar focal mechanism are grouped using the clustering analysis method.Compared to the obtained focal mechanisms,it is found that there are good correlations with the azimuth of P axes in each clustering group,and the larger the correlation coefficient,the closer the azimuths of P axes.We divide the Yingjiang area into 3 regions to analyze the stress level and stress direction by combining the source parameters and the mean focal mechanism of each group.The results show:The change and transformation of the focal mechanism types at different stages can represent the temporal characteristics of the regional stress field.If the earthquake focal mechanism types are concentrated in a time period and switch to the direction of regional stress field,it may be a sign of strong earthquake.There is some relationship between the stress drop and the type of focal mechanism.Those earthquakes with stress fields revealed by focal mechanism types closer to the regional tectonic stress field will have higher stress drop,while those with the focal mechanism-revealed stress fields differing a lot from the regional tectonic stress field will generally have a lower stress drop.
基金the National Natural Science Foundation of China (Grnat No. 19971068) .
文摘By means of a method of analytic number theory the following theorem is proved. Letp be a quasi-homogeneous linear partial differential operator with degreem,m > 0, w.r.t a dilation $\left\{ {\delta _\tau } \right\}{\text{ }}_{\tau< 0} $ given by ( a1, …, an). Assume that either a1, …, an are positive rational numbers or $m{\text{ = }}\sum\limits_{j = 1}^n {\alpha _j \alpha _j } $ for some $\alpha {\text{ = }}\left( {\alpha _1 ,{\text{ }} \ldots {\text{ }},\alpha _n } \right) \in l _ + ^n $ Then the dimension of the space of polynomial solutions of the equationp[u] = 0 on ?n must be infinite
