Mathematical models of propellers were created that investigate the influence of periodic boundary conditions on predictions of a propeller's performance.Thrust and torque coefficients corresponding to different a...Mathematical models of propellers were created that investigate the influence of periodic boundary conditions on predictions of a propeller's performance.Thrust and torque coefficients corresponding to different advance coefficients of DTMB 4119, 4382, and 4384 propellers were calculated.The pressure coefficient distribution of the DTMB 4119 propeller at different sections was also physically tested.Comparisons indicated good agreement between the results of experiments and the simulation.It showed that the periodic boundary condition can be used to rationally predict the open water performance of a propeller.By analyzing the three established modes for the computation, it was shown that using the spline curve method to divide the grids can meet the calculation's demands for precision better than using the rake cutting method.展开更多
with rapid achievement of current information technology and computing ability and applications,much more digital content such as films,cartoons,design drawings,office documents and software source codes are produced ...with rapid achievement of current information technology and computing ability and applications,much more digital content such as films,cartoons,design drawings,office documents and software source codes are produced in daily work,however to protect the content being copying,shared or deliberately stolen by inside or outside,digital rights management(DRM) became more and more important for digital content protection.In this paper,we studied various DRM model,technology and application,and first proposed DRM Security Infrastructure(DSI),in which we defined encryption,hash,signature algorithm,watermarking algorithms,authentication,usage control,trusted counter,conditional trace,secure payment,and based on the DSI we then proposed a whole classification approach and architecture of all kinds of DRMs,in which we proposed 6 typical classes of copyrights and content protection DRMs architecture:(1) Software-oriented DRM,(2) e Book-oriented DRM,(3) Video-oriented DRM,(4) Image-Oriented DRM(5) Unstructured data oriented DRM,(6) Text-oriented DRM.Based on the above DSI,we then proposed a dynamic DRM model selection method for various DRM application,which can be adapted dynamically for different technology of different applications,which can provide awhole solution for variant DRM development in a rapid and customized mode.The proposed DRM method,technology and application in this paper provided a common,flexible and extendable solution for variant DRM scenes,and can support rapid and customized development.Moreover,we proposed an opinion that the future life will enter into a new era that the content usage and consumption will not again adopt DRM technology rather than with law,liberty and morality.展开更多
This paper put forward the structure and construction process of three-dimensional visualization of hydroelectric construction system model based on GIS and 3D visualization platform. The paper first describes the 3D ...This paper put forward the structure and construction process of three-dimensional visualization of hydroelectric construction system model based on GIS and 3D visualization platform. The paper first describes the 3D visualization based on GIS, then discusses the method of constructing 3D visual digital model, and then introduces the terrain digital technology, feature modeling technology. Finally, the technical route shows that this method has good practicability.展开更多
We present a bulk micromachined in-plane capacitive accelerometer fabricated with an improved process flow,by etching only one-fifth of the wafer thickness at the back of the silicon while forming the bar-structure el...We present a bulk micromachined in-plane capacitive accelerometer fabricated with an improved process flow,by etching only one-fifth of the wafer thickness at the back of the silicon while forming the bar-structure electrode for the sensing capacitor.The improved flow greatly lowers the footing effect during deep reactive ion etching(DRIE),and increases the proof mass by 54% compared to the traditional way,resulting in both improved device quality and a higher yield rate.Acceleration in the X direction is sensed capacitively by varying the overlapped area of a differential capacitor pair,which eliminates the nonlinear behavior by fixing the parallel-plate gap.The damping coefficient of the sensing motion is low due to the slide-film damping.A large proof mass is made using DRIE,which also ensures that dimensions of the spring beams in the Y and Z directions can be made large to lower cross axis coupling and increase the pull-in voltage.The theoretical Brownian noise floor is 0.47 μg/Hz1/2 at room temperature and atmospheric pressure.The tested frequency response of a prototype complies with the low damping design scheme.Output data for input acceleration from ?1 g to 1 g are recorded by a digital multimeter and show very good linearity.The tested random bias of the prototype is 130 μg at an averaging time of around 6 s.展开更多
In mountainous areas, it is the undulant terrain, various types of geomorphic and land use that make the remote sensing images great metamorphism. Moreover, due to the elevation, there are many areas covered with shad...In mountainous areas, it is the undulant terrain, various types of geomorphic and land use that make the remote sensing images great metamorphism. Moreover, due to the elevation, there are many areas covered with shadow, clouds and snow that make the images more inaccurate. As a result, it would be very difficult to carry out auto-classification of RS images in these areas. The study took Southwest China as the case study area and the TM images, SPOT images as the basic information sources assisted by the auxiliary data of DEM, NDVl, topographical maps and soil maps to preprocess the images. After preprocessing by topographic correction and wiping off clouds, snow and shadows, all the image data were stacked together to form the images to be classified. Then, the research used segmentation technology and hierarchical method to extract the main types of land use in the area automatically. The results indicated that the qualitative accuracies of all types of land use extracted in Southwest China were above 90 percent, and the quantitative accuracies was above 86 percent. The goal of reducing workloads had been realized.展开更多
基金Supported by the National Natural Science Foundation of China under Grant No.10702016
文摘Mathematical models of propellers were created that investigate the influence of periodic boundary conditions on predictions of a propeller's performance.Thrust and torque coefficients corresponding to different advance coefficients of DTMB 4119, 4382, and 4384 propellers were calculated.The pressure coefficient distribution of the DTMB 4119 propeller at different sections was also physically tested.Comparisons indicated good agreement between the results of experiments and the simulation.It showed that the periodic boundary condition can be used to rationally predict the open water performance of a propeller.By analyzing the three established modes for the computation, it was shown that using the spline curve method to divide the grids can meet the calculation's demands for precision better than using the rake cutting method.
文摘with rapid achievement of current information technology and computing ability and applications,much more digital content such as films,cartoons,design drawings,office documents and software source codes are produced in daily work,however to protect the content being copying,shared or deliberately stolen by inside or outside,digital rights management(DRM) became more and more important for digital content protection.In this paper,we studied various DRM model,technology and application,and first proposed DRM Security Infrastructure(DSI),in which we defined encryption,hash,signature algorithm,watermarking algorithms,authentication,usage control,trusted counter,conditional trace,secure payment,and based on the DSI we then proposed a whole classification approach and architecture of all kinds of DRMs,in which we proposed 6 typical classes of copyrights and content protection DRMs architecture:(1) Software-oriented DRM,(2) e Book-oriented DRM,(3) Video-oriented DRM,(4) Image-Oriented DRM(5) Unstructured data oriented DRM,(6) Text-oriented DRM.Based on the above DSI,we then proposed a dynamic DRM model selection method for various DRM application,which can be adapted dynamically for different technology of different applications,which can provide awhole solution for variant DRM development in a rapid and customized mode.The proposed DRM method,technology and application in this paper provided a common,flexible and extendable solution for variant DRM scenes,and can support rapid and customized development.Moreover,we proposed an opinion that the future life will enter into a new era that the content usage and consumption will not again adopt DRM technology rather than with law,liberty and morality.
文摘This paper put forward the structure and construction process of three-dimensional visualization of hydroelectric construction system model based on GIS and 3D visualization platform. The paper first describes the 3D visualization based on GIS, then discusses the method of constructing 3D visual digital model, and then introduces the terrain digital technology, feature modeling technology. Finally, the technical route shows that this method has good practicability.
基金Project(No.NCET-06-0514)supported by the Program for New Century Excellent Talents in University,China
文摘We present a bulk micromachined in-plane capacitive accelerometer fabricated with an improved process flow,by etching only one-fifth of the wafer thickness at the back of the silicon while forming the bar-structure electrode for the sensing capacitor.The improved flow greatly lowers the footing effect during deep reactive ion etching(DRIE),and increases the proof mass by 54% compared to the traditional way,resulting in both improved device quality and a higher yield rate.Acceleration in the X direction is sensed capacitively by varying the overlapped area of a differential capacitor pair,which eliminates the nonlinear behavior by fixing the parallel-plate gap.The damping coefficient of the sensing motion is low due to the slide-film damping.A large proof mass is made using DRIE,which also ensures that dimensions of the spring beams in the Y and Z directions can be made large to lower cross axis coupling and increase the pull-in voltage.The theoretical Brownian noise floor is 0.47 μg/Hz1/2 at room temperature and atmospheric pressure.The tested frequency response of a prototype complies with the low damping design scheme.Output data for input acceleration from ?1 g to 1 g are recorded by a digital multimeter and show very good linearity.The tested random bias of the prototype is 130 μg at an averaging time of around 6 s.
基金Supported by the National Public Welfare Project on Environmental Protection (2007KYYW21)the Program of National Science and Technology research(2006BAC01A01-05)
文摘In mountainous areas, it is the undulant terrain, various types of geomorphic and land use that make the remote sensing images great metamorphism. Moreover, due to the elevation, there are many areas covered with shadow, clouds and snow that make the images more inaccurate. As a result, it would be very difficult to carry out auto-classification of RS images in these areas. The study took Southwest China as the case study area and the TM images, SPOT images as the basic information sources assisted by the auxiliary data of DEM, NDVl, topographical maps and soil maps to preprocess the images. After preprocessing by topographic correction and wiping off clouds, snow and shadows, all the image data were stacked together to form the images to be classified. Then, the research used segmentation technology and hierarchical method to extract the main types of land use in the area automatically. The results indicated that the qualitative accuracies of all types of land use extracted in Southwest China were above 90 percent, and the quantitative accuracies was above 86 percent. The goal of reducing workloads had been realized.