Aiming to investigate the fatigue damage mechanism and bearing characteristics of multi-pillar system under cyclic loading,a series of axial cyclic loading tests with different cyclic amplitudes were carried out on tr...Aiming to investigate the fatigue damage mechanism and bearing characteristics of multi-pillar system under cyclic loading,a series of axial cyclic loading tests with different cyclic amplitudes were carried out on triple-pillar marble specimens.The acoustic emission(AE)and digital image correlation(DIC)were jointly applied to monitoring and recording damage evolution and failure behavior of each pillar,which reproduced the cataclysmic instability process of underground pillar groups.Experimental results indicated that the cyclic amplitude exceeding the threshold of damage initiation weakened the resistance to deformation,resulting in obvious release of dissipated energy and the reduction of bearing capacity.Conversely,after low-amplitude cyclic loading,both the pre-peak bearing capacity and the post-peak ductility of the pillar system increased due to the compaction of initial defects,indicating that the peak bearing capacity was closely related to the extent of pre-peak fatigue damage.The axial strain of each pillar was measured by DIC virtual extensometer to present the damage extent during cyclic loading phase.Meanwhile,fracture evolution of typical load drop points was also characterized by transverse strain fields(εxx),and observations showed that the damage extent of key pillar undergoing high-amplitude cyclic loads was more serious and violent,accompanied by the ejection of rock debris and loud noises.展开更多
Roof pre-splitting is an effective method to control the roof with potential rock burst risk.In this study,three-point bending tests were carried out by using fine sandstone specimens with different pre-cracked length...Roof pre-splitting is an effective method to control the roof with potential rock burst risk.In this study,three-point bending tests were carried out by using fine sandstone specimens with different pre-cracked lengths as test objects,and digital speckle correlation method(DSCM)and acoustic emission(AE)technology were used to track the entire process of crack propagation.The effect of pre-cracks on the fracture of rock beams was evaluated,and the mechanical mechanism of the rock beam fracture process was analyzed.The rock beam pre-splitting design method was developed,and the application effect of the method was proved by the microseismic monitoring data obtained from the 10303 working face of Jining No.2 coal mine in China.The results show that the loading time history curve of pre-cracked beams exhibits obvious residual characteristics.Compared with the intact rock beam,the tensile strength,and maximum tensile strain of 35 mm pre-cracked rock beam are decreased by 32.4% and 33.1%,respectively and the acoustic emission b value is increased by 30.2%.According to the pre-splitting design method of rock beam,the maximum and average microseismic energy of the 10303 working face after pre-splitting construction are reduced by 25.6% and 6.4%,respectively,with excellent prevention and control effect of thick roof.展开更多
The modal back-scattering matrix can be extracted from reverberation data. For high frequency cases the ’window smoothed’ processing has been proposed by E. C. Shang, T. F. Gao and D. J. Tang (2002) to extract the ...The modal back-scattering matrix can be extracted from reverberation data. For high frequency cases the ’window smoothed’ processing has been proposed by E. C. Shang, T. F. Gao and D. J. Tang (2002) to extract the ’window averaged’ back-scattering matrix. It is pointed out in this paper that in order to inverse the ’window averaged’ back-scattering matrix by changing the source depth data we have to assume that the matrix is not related to the source depth, and the numerical simulation on the question has been conducted.展开更多
Stimulated Brillouin scattering in optical fibers is described by a theoretical model and numerical analysis. The results showed that, for an optical fiber pumped by a laser beam with ns-order-pulse width and kW-order...Stimulated Brillouin scattering in optical fibers is described by a theoretical model and numerical analysis. The results showed that, for an optical fiber pumped by a laser beam with ns-order-pulse width and kW-order peak-power, SBS reflectivity tends to saturate when the fiber length exceeds a limit, named 'effective fiber length'. Using small core-diameter and long enough fiber, the SBS reflectivity level could be raised but is limited by optical damage of the entrance surface of the fiber. Therefore, just a small dynamic range can be obtained.展开更多
Efficient numerical solver for the SchrSdinger equation is very important in physics and chemistry. The finite element discrete variable representation （FE-DVR） was first proposed by Rescigno and Mc-Curdy [Phys. Rev...Efficient numerical solver for the SchrSdinger equation is very important in physics and chemistry. The finite element discrete variable representation （FE-DVR） was first proposed by Rescigno and Mc-Curdy [Phys. Rev. A 62, 032706 （2000）] for solving quantum-mechanical scattering problems. In this work, an FE-DVR method in a mapped coordinate was proposed to improve the efficiency of the original FE-DVR method. For numerical demonstration, the proposed approach is applied for solving the electronic eigenfunctions and eigenvalues of the hydrogen atom and vibrational states of the electronic state 3E＋ of the Cs2 molecule which has long-range interaction potential. The numerical results indicate that the numerical efficiency of the original FE-DVR has been improved much using our proposed mapped coordinate scheme.展开更多
The present work describes a numerical study of a confined two-phase flow under high-pressure conditions, typical of gas turbine combustors. An Eulerian frame was used for the gas phase together with a Lagrangian appr...The present work describes a numerical study of a confined two-phase flow under high-pressure conditions, typical of gas turbine combustors. An Eulerian frame was used for the gas phase together with a Lagrangian approach to describe the dispersed phase. The computational method was extended to high-pressure environments, which are more representative of the practical gas turbine operating conditions. The results are compared with experimental data, and revealed the ability of the model to increase the knowledge of the turbulent dispersion phenomena for this type of practical conditions (high pressure and confined flow).展开更多
基金Project(2015CB060200)supported by the National Basic Research Program of ChinaProject(41772313)supported by the National Natural Science Foundation of ChinaProject(2017zzts185)supported by the Fundamental Research Funds for the Central Universities,China
文摘Aiming to investigate the fatigue damage mechanism and bearing characteristics of multi-pillar system under cyclic loading,a series of axial cyclic loading tests with different cyclic amplitudes were carried out on triple-pillar marble specimens.The acoustic emission(AE)and digital image correlation(DIC)were jointly applied to monitoring and recording damage evolution and failure behavior of each pillar,which reproduced the cataclysmic instability process of underground pillar groups.Experimental results indicated that the cyclic amplitude exceeding the threshold of damage initiation weakened the resistance to deformation,resulting in obvious release of dissipated energy and the reduction of bearing capacity.Conversely,after low-amplitude cyclic loading,both the pre-peak bearing capacity and the post-peak ductility of the pillar system increased due to the compaction of initial defects,indicating that the peak bearing capacity was closely related to the extent of pre-peak fatigue damage.The axial strain of each pillar was measured by DIC virtual extensometer to present the damage extent during cyclic loading phase.Meanwhile,fracture evolution of typical load drop points was also characterized by transverse strain fields(εxx),and observations showed that the damage extent of key pillar undergoing high-amplitude cyclic loads was more serious and violent,accompanied by the ejection of rock debris and loud noises.
基金Project(2019SDZY02)supported by Major Scientific and Technological Innovation Project of Shandong Provincial Key Research Development Program,ChinaProject(ZR2019ZD13)supported by Major Program of Shandong Provincial Natural Science Foundation,ChinaProject(52274086)supported by the National Natural Science Foundation of China。
文摘Roof pre-splitting is an effective method to control the roof with potential rock burst risk.In this study,three-point bending tests were carried out by using fine sandstone specimens with different pre-cracked lengths as test objects,and digital speckle correlation method(DSCM)and acoustic emission(AE)technology were used to track the entire process of crack propagation.The effect of pre-cracks on the fracture of rock beams was evaluated,and the mechanical mechanism of the rock beam fracture process was analyzed.The rock beam pre-splitting design method was developed,and the application effect of the method was proved by the microseismic monitoring data obtained from the 10303 working face of Jining No.2 coal mine in China.The results show that the loading time history curve of pre-cracked beams exhibits obvious residual characteristics.Compared with the intact rock beam,the tensile strength,and maximum tensile strain of 35 mm pre-cracked rock beam are decreased by 32.4% and 33.1%,respectively and the acoustic emission b value is increased by 30.2%.According to the pre-splitting design method of rock beam,the maximum and average microseismic energy of the 10303 working face after pre-splitting construction are reduced by 25.6% and 6.4%,respectively,with excellent prevention and control effect of thick roof.
文摘The modal back-scattering matrix can be extracted from reverberation data. For high frequency cases the ’window smoothed’ processing has been proposed by E. C. Shang, T. F. Gao and D. J. Tang (2002) to extract the ’window averaged’ back-scattering matrix. It is pointed out in this paper that in order to inverse the ’window averaged’ back-scattering matrix by changing the source depth data we have to assume that the matrix is not related to the source depth, and the numerical simulation on the question has been conducted.
文摘Stimulated Brillouin scattering in optical fibers is described by a theoretical model and numerical analysis. The results showed that, for an optical fiber pumped by a laser beam with ns-order-pulse width and kW-order peak-power, SBS reflectivity tends to saturate when the fiber length exceeds a limit, named 'effective fiber length'. Using small core-diameter and long enough fiber, the SBS reflectivity level could be raised but is limited by optical damage of the entrance surface of the fiber. Therefore, just a small dynamic range can be obtained.
文摘Efficient numerical solver for the SchrSdinger equation is very important in physics and chemistry. The finite element discrete variable representation （FE-DVR） was first proposed by Rescigno and Mc-Curdy [Phys. Rev. A 62, 032706 （2000）] for solving quantum-mechanical scattering problems. In this work, an FE-DVR method in a mapped coordinate was proposed to improve the efficiency of the original FE-DVR method. For numerical demonstration, the proposed approach is applied for solving the electronic eigenfunctions and eigenvalues of the hydrogen atom and vibrational states of the electronic state 3E＋ of the Cs2 molecule which has long-range interaction potential. The numerical results indicate that the numerical efficiency of the original FE-DVR has been improved much using our proposed mapped coordinate scheme.
基金the scope ofthe activihes of the Aero-Thermodynamics Group forAerospace Sciences and Technology, and was sponsoredby the P
文摘The present work describes a numerical study of a confined two-phase flow under high-pressure conditions, typical of gas turbine combustors. An Eulerian frame was used for the gas phase together with a Lagrangian approach to describe the dispersed phase. The computational method was extended to high-pressure environments, which are more representative of the practical gas turbine operating conditions. The results are compared with experimental data, and revealed the ability of the model to increase the knowledge of the turbulent dispersion phenomena for this type of practical conditions (high pressure and confined flow).
