Based on the application of practical engineering,propagation processes of explosive waves in rock with water well and tunnel are simulated by ANSYS/LS-DYNA software. The evolution of damage in rock is presented. The ...Based on the application of practical engineering,propagation processes of explosive waves in rock with water well and tunnel are simulated by ANSYS/LS-DYNA software. The evolution of damage in rock is presented. The effect of water on the damage of the concrete slab in a tunnel is compared with damage inflicted without water. The numerical simulation illustrates that water plays an important role in the evolution of damage of the concrete slab in a mine tunnel. In the presence of water in the rock the concrete slab is damaged more severely than without water in rock. The effect of water location in the rock is also considered. It is found that the concrete slab in the tunnel shows various degrees of damage as a function of the different locations of water. Attenuation laws of stress waves over time-space in rock with water are also obtained. Numerical results indicate that,under blast loading,there are three zones in the rock: a crushed zone nearby the explosive charge,a damaged zone and an elastic zone. The conclusions of numerical analysis may provide references for blasting designs and structure protection.展开更多
The dynamic characteristics and failure modes of steel reinforced concrete (SRC) columns subjected to blast loading are complicated because of the transient stress wave in the SRC columns and the interaction between s...The dynamic characteristics and failure modes of steel reinforced concrete (SRC) columns subjected to blast loading are complicated because of the transient stress wave in the SRC columns and the interaction between steel and concrete. This paper presents a numerical simulation of the response of SRC columns subjected to blast loading using hydrocode LS-DYNA. In the numerical model, a sophisticate concrete material model (the Concrete Damage Model) is employed with consideration of the strain rate effect and the damage accumulation. An erosion technique is adopted to model the spalling process of concrete. The possible failure modes of SRC columns are evaluated. It is observed that the failure of SRC columns subjected to blast load can generally be classified into three modes, namely, a direct failure in concrete body due to the stress wave, a transverse shear failure near the support sections due to the high shear force, and a flexural failure pertaining to large local and global deformation of the reinforcing steel.展开更多
To study the bending strength of mass concrete under dynamic loading, the pure bending zone of three-graded concrete beam is considered as a three-phase composite composed of matrix, aggregate and interface between th...To study the bending strength of mass concrete under dynamic loading, the pure bending zone of three-graded concrete beam is considered as a three-phase composite composed of matrix, aggregate and interface between them on meso-level. Dynamic constitutive model considering strain-rate strengthening effect and damage softening effect is adopted to describe the cocrete and meso-element's damage. The failure mechanisms of beam under impact loading, triagle wave load, dynamic load coupling with initial static loading were simulated by using displacement-controlled FEM. Furthermore, stress-strain curve of the specimens and their dynamic bending strength were obtained. The results obtained from numerical simulation agreed well with experimental data.展开更多
The aim of this work is to determine the porosity of concrete by means of two NDT （non-destructive testing） using digital images. In one test, the images were obtained through X-ray microtomography and for another t...The aim of this work is to determine the porosity of concrete by means of two NDT （non-destructive testing） using digital images. In one test, the images were obtained through X-ray microtomography and for another test via digital scanner. In both of the tests, the images were processed using techniques of mathematical morphology and pixel processing. For both NDT, it was used concrete samples with 20-30 MPa of compressive strength. The results for the porosity were compared with results obtained by the standard test proposed by NBR （Norma Brasileira） 9778 （2005） showing the compatibility between two studied methods and pattern method.展开更多
基金Projects 2002CB412705 supported by the National Basic Research & Development Program (973)50579042 by the National Natural Science Foundation of China+1 种基金NCET-05-0215 by the Chinese New-Century Outstanding FellowshipJD102900553 by the Key Laboratories of Beijing Municipal Commis- sion of Education and Science and Technology Commission
文摘Based on the application of practical engineering,propagation processes of explosive waves in rock with water well and tunnel are simulated by ANSYS/LS-DYNA software. The evolution of damage in rock is presented. The effect of water on the damage of the concrete slab in a tunnel is compared with damage inflicted without water. The numerical simulation illustrates that water plays an important role in the evolution of damage of the concrete slab in a mine tunnel. In the presence of water in the rock the concrete slab is damaged more severely than without water in rock. The effect of water location in the rock is also considered. It is found that the concrete slab in the tunnel shows various degrees of damage as a function of the different locations of water. Attenuation laws of stress waves over time-space in rock with water are also obtained. Numerical results indicate that,under blast loading,there are three zones in the rock: a crushed zone nearby the explosive charge,a damaged zone and an elastic zone. The conclusions of numerical analysis may provide references for blasting designs and structure protection.
文摘The dynamic characteristics and failure modes of steel reinforced concrete (SRC) columns subjected to blast loading are complicated because of the transient stress wave in the SRC columns and the interaction between steel and concrete. This paper presents a numerical simulation of the response of SRC columns subjected to blast loading using hydrocode LS-DYNA. In the numerical model, a sophisticate concrete material model (the Concrete Damage Model) is employed with consideration of the strain rate effect and the damage accumulation. An erosion technique is adopted to model the spalling process of concrete. The possible failure modes of SRC columns are evaluated. It is observed that the failure of SRC columns subjected to blast load can generally be classified into three modes, namely, a direct failure in concrete body due to the stress wave, a transverse shear failure near the support sections due to the high shear force, and a flexural failure pertaining to large local and global deformation of the reinforcing steel.
基金Supported by the National Natural Science Foundation(No.90510011)National Science Fund for Distinguished Young Scholars(No.50325826)
文摘To study the bending strength of mass concrete under dynamic loading, the pure bending zone of three-graded concrete beam is considered as a three-phase composite composed of matrix, aggregate and interface between them on meso-level. Dynamic constitutive model considering strain-rate strengthening effect and damage softening effect is adopted to describe the cocrete and meso-element's damage. The failure mechanisms of beam under impact loading, triagle wave load, dynamic load coupling with initial static loading were simulated by using displacement-controlled FEM. Furthermore, stress-strain curve of the specimens and their dynamic bending strength were obtained. The results obtained from numerical simulation agreed well with experimental data.
文摘The aim of this work is to determine the porosity of concrete by means of two NDT （non-destructive testing） using digital images. In one test, the images were obtained through X-ray microtomography and for another test via digital scanner. In both of the tests, the images were processed using techniques of mathematical morphology and pixel processing. For both NDT, it was used concrete samples with 20-30 MPa of compressive strength. The results for the porosity were compared with results obtained by the standard test proposed by NBR （Norma Brasileira） 9778 （2005） showing the compatibility between two studied methods and pattern method.
