The Data system of VG-70SE is Based on the Windows98 and Visual C++ program language, WINRT I/O control system software. The interface is based on the ISA bus and FIFO technology. The Data system has the same function...The Data system of VG-70SE is Based on the Windows98 and Visual C++ program language, WINRT I/O control system software. The interface is based on the ISA bus and FIFO technology. The Data system has the same function of the old system.展开更多
随着测控设备数量增加、数据码率的不断提高,传统的测控中心实时存储系统采用的串行化处理逻辑已经难以适应高负载的测控任务需要。采用SPMD(Single Program Multiple Data)思想,基于OpenMP和Qt设计并实现了一套并行实时测控数据存储系...随着测控设备数量增加、数据码率的不断提高,传统的测控中心实时存储系统采用的串行化处理逻辑已经难以适应高负载的测控任务需要。采用SPMD(Single Program Multiple Data)思想,基于OpenMP和Qt设计并实现了一套并行实时测控数据存储系统框架。该系统通过引入M/M/1模型的排队系统,设计了一种适合并行实时测控数据存储系统的静态负载均衡算法,基于互斥锁完成了线程间的细粒度通信同步机制,借助于事件循环机制将Qt的信号与槽特性成功地嵌入OpenMP线程,保留了Qt图形界面良好的人机交互性能。实验结果表明该系统在高负载的情况下,相比串行测控数据存储系统而言具有更好的扩展性和实时性,能更好地利用现行单机多核系统的计算资源,获得更好的实时性能。展开更多
The upgrading improvement on MM-903 isotope gas mass spectrometer -Computer, including new type electric-magnatic valve used and relative changes on its controlling electic route , has modified working environment of ...The upgrading improvement on MM-903 isotope gas mass spectrometer -Computer, including new type electric-magnatic valve used and relative changes on its controlling electic route , has modified working environment of its hardwares and softwares, and increased /enhanced the intelligent function of CPU on the base of the present MS. The practical tests on criterion samples have indicated that MM-903 isotope GMS-CPU systerm works well and our improvement is effective.展开更多
A set of water powered excavation test system was developed for the comprehensive performance testing and evaluation of water powered percussive rock drill indoors. The whole system contains hydraulic power section, e...A set of water powered excavation test system was developed for the comprehensive performance testing and evaluation of water powered percussive rock drill indoors. The whole system contains hydraulic power section, electronic control system, test and data acquisition system, and assistant devices, such as guideway and drilling bench. Parameters of the water powered percussive rock drill can be obtained by analyzing testing data, which contain impact energy, front and back cavity pressure, pressure and flow in each working part, drilling velocity, frequency and energy efficiency etc. The system is applied to test the self-designed water powered percussive rock drill SYYG65. The parameters of water powered percussive rock drill with impact pressure of about 8.9 MPa are 58.93 J for impact energy, and 8.97% for energy efficiency, which prove the effectiveness of system.展开更多
By considering the static voltage characteristic of the load, we propose a WAMS/SCADA mixed nonlinear method to estimate the voltage of unobservable buses caused by topology change or phasor measurement unit (PMU) mal...By considering the static voltage characteristic of the load, we propose a WAMS/SCADA mixed nonlinear method to estimate the voltage of unobservable buses caused by topology change or phasor measurement unit (PMU) malfunction in a power system. By modeling the load characteristic with data from SCADA, we employed the Gauss-Seidel method to solve the nonlinear equations and estimate the voltage of unobservable buses with the high precision voltages of neighboring buses measured by a PMU. Simulations were carried out on the IEEE 39-bus system, and the results show that this novel method can dynamically and accurately trace the variation of the voltage phasor of the unobservable buses.展开更多
文摘The Data system of VG-70SE is Based on the Windows98 and Visual C++ program language, WINRT I/O control system software. The interface is based on the ISA bus and FIFO technology. The Data system has the same function of the old system.
文摘随着测控设备数量增加、数据码率的不断提高,传统的测控中心实时存储系统采用的串行化处理逻辑已经难以适应高负载的测控任务需要。采用SPMD(Single Program Multiple Data)思想,基于OpenMP和Qt设计并实现了一套并行实时测控数据存储系统框架。该系统通过引入M/M/1模型的排队系统,设计了一种适合并行实时测控数据存储系统的静态负载均衡算法,基于互斥锁完成了线程间的细粒度通信同步机制,借助于事件循环机制将Qt的信号与槽特性成功地嵌入OpenMP线程,保留了Qt图形界面良好的人机交互性能。实验结果表明该系统在高负载的情况下,相比串行测控数据存储系统而言具有更好的扩展性和实时性,能更好地利用现行单机多核系统的计算资源,获得更好的实时性能。
文摘The upgrading improvement on MM-903 isotope gas mass spectrometer -Computer, including new type electric-magnatic valve used and relative changes on its controlling electic route , has modified working environment of its hardwares and softwares, and increased /enhanced the intelligent function of CPU on the base of the present MS. The practical tests on criterion samples have indicated that MM-903 isotope GMS-CPU systerm works well and our improvement is effective.
基金Project(2006AA06Z134) supported by the National High Technology Research and Development Program of ChinaProjects(50934006, 50904079) supported by the National Natural Science Foundation of China
文摘A set of water powered excavation test system was developed for the comprehensive performance testing and evaluation of water powered percussive rock drill indoors. The whole system contains hydraulic power section, electronic control system, test and data acquisition system, and assistant devices, such as guideway and drilling bench. Parameters of the water powered percussive rock drill can be obtained by analyzing testing data, which contain impact energy, front and back cavity pressure, pressure and flow in each working part, drilling velocity, frequency and energy efficiency etc. The system is applied to test the self-designed water powered percussive rock drill SYYG65. The parameters of water powered percussive rock drill with impact pressure of about 8.9 MPa are 58.93 J for impact energy, and 8.97% for energy efficiency, which prove the effectiveness of system.
基金Project supported by the National Natural Science Foundation of China (Nos. 50507018, 50595414, 50677062, and 60421002)the National Basic Research Program (973) of China (No. 2004CB217902)+1 种基金the National Key Technologies Supporting Program of Chinaduring the 11th Five-Year Plan Period (No. 2006BAA02A01)theKey Grant Project of MOE of China (No. 305008)
文摘By considering the static voltage characteristic of the load, we propose a WAMS/SCADA mixed nonlinear method to estimate the voltage of unobservable buses caused by topology change or phasor measurement unit (PMU) malfunction in a power system. By modeling the load characteristic with data from SCADA, we employed the Gauss-Seidel method to solve the nonlinear equations and estimate the voltage of unobservable buses with the high precision voltages of neighboring buses measured by a PMU. Simulations were carried out on the IEEE 39-bus system, and the results show that this novel method can dynamically and accurately trace the variation of the voltage phasor of the unobservable buses.
