A CO2 laser die-cutting system, which does not need die board any more, is a new technique for manufac-turing packing box. Two optical paths, the galvanometer scanning system and the flying optical system, are used to...A CO2 laser die-cutting system, which does not need die board any more, is a new technique for manufac-turing packing box. Two optical paths, the galvanometer scanning system and the flying optical system, are used to satisfy different processing needs. The scanning system is composed of galvanometer scanning mirrors and F-θ lens. And the flying optical system is driven by two servo motors. This paper presents the software and hardware design of the laser die-cutting system, the difference between the two optical paths, as well as the relationship among the cutting speed, thickness of wrapping paper and laser power. The cutting speed and thickness of wrapping paper are linearly increased by the incremental laser power, while the cutting speed is hyperbolically decreased by the incremental thickness of wrapping paper when the laser power is constant. The amount of incision is reduced by 20% and the processing time by 40% when tested by a low power RF CO2 laser die-cutting system using the optimized program. This tech- nique is also used for the reference of other rapid laser processing systems.展开更多
As an important branch in the field of servo control, multi-motor coordination motion control applications are increasingly widespread.For open CNC system requirement, taking DSP as master core, combing with specific ...As an important branch in the field of servo control, multi-motor coordination motion control applications are increasingly widespread.For open CNC system requirement, taking DSP as master core, combing with specific integrated stepper motor driver chip LMDI8201T, this designed a serial communication-based new collaborative multi-motor control system, which has characters of highly integrated, good stability, real-time, convenient man-machine interface.The test results show that the system fully meet performance requirements and achieved the motion control functions.展开更多
Solid oxide fuel cells (SOFCs) are considered to be one of the most important clean,distributed resources. However,SOFCs present a challenging control problem owing to their slow dynamics,nonlinearity and tight operat...Solid oxide fuel cells (SOFCs) are considered to be one of the most important clean,distributed resources. However,SOFCs present a challenging control problem owing to their slow dynamics,nonlinearity and tight operating constraints. A novel data-driven nonlinear control strategy was proposed to solve the SOFC control problem by combining a virtual reference feedback tuning (VRFT) method and support vector machine. In order to fulfill the requirement for fuel utilization and control constraints,a dynamic constraints unit and an anti-windup scheme were adopted. In addition,a feedforward loop was designed to deal with the current disturbance. Detailed simulations demonstrate that the fast response of fuel flow for the current demand disturbance and zero steady error of the output voltage are both achieved. Meanwhile,fuel utilization is kept almost within the safe region.展开更多
Pulse width modulation （ PWM） drive control digitalization is the key for the full digital invert power supply. New ideas are proposed, which are based on field programmable gate array （ FPGA ）. First, digital PWM...Pulse width modulation （ PWM） drive control digitalization is the key for the full digital invert power supply. New ideas are proposed, which are based on field programmable gate array （ FPGA ）. First, digital PWM principles are discussed. The primary and secondary current characteristics are analyzed when the transformer is in both normal and magnetic bias conditions. Second, two digitalization methods are put forward after the research on PWM adjustment principles, which are based on the primary current feedback. Though the two methods could restrain magnetic bias, their realization is difficult. A new method is researched on double close-loops to overcome the above shortcomings, which uses the secondary current as the feedback signal and the primary current as the protection signal. Finally, the secondary current control made is discussed and realized. Welding experimental results show that the method has strong flexibility and adaptability, which can be used to realize the full digital welding power supply.展开更多
This paper presents a constructive design of new controllers that force underactuated ships under constant or slow time-varying sea loads to asymptotically track a parameterized reference path, that guarantees the dis...This paper presents a constructive design of new controllers that force underactuated ships under constant or slow time-varying sea loads to asymptotically track a parameterized reference path, that guarantees the distance from the ship to the reference path always be within a specified value. The control design is based on a global exponential disturbance observer, a transformation of the ship dynamics to an almost spherical form, an interpretation of the tracking errors in an earth-fixed frame, an introduction of dynamic variables to compensate for relaxation of the reference path generation, p-times differentiable step functions, and backstepping and Lyapunov＇s direct methods. The effectiveness of the proposed results is illustrated through simulations.展开更多
This paper presents a transition-mode zero-voltage-switching inverter for the cooker magnetron of household microwave ovens. The inverter drives a leakage transformer to generate the required high voltage and stabiliz...This paper presents a transition-mode zero-voltage-switching inverter for the cooker magnetron of household microwave ovens. The inverter drives a leakage transformer to generate the required high voltage and stabilized current. For achieving zero-voltage switching, a transition-mode driver L6561 is utilized to detect the ending of transformer resonance and drive an insulated-gate-bipolar-transistor. As transistor is conducted, rectified direct-current voltage drives the transformer. While transistor is cut off, transformer resonates with a parallel capacitor. Transistor conduction time and magnetron power are controlled with a 16-bit digital signal controller dsPIC30F4011. For widening the working range, transistor conduction time is set to be inversely changed with line-frequency input voltage. To demonstrate the analysis and design of this paper, a 1 kW inverter circuit is built. Experimental results show the feasibility and usefulness of the designed magnetron power supply.展开更多
For human assistance device, the particular properties are usually focused on high precision, compliant interaction, large torque generation and compactness of the mechanical system. To realize the high performance of...For human assistance device, the particular properties are usually focused on high precision, compliant interaction, large torque generation and compactness of the mechanical system. To realize the high performance of lower extremity augmentation device, in this paper, we introduce a novel control methodology for compact elastic module. Based on the previous work, the elastic module consists of two parts, i.e., the proximal interaction module and the distal control module. To improve the compactness of the exoskeleton, we only employ the distal control module to achieve both purposes of precision force control and human intention recognition with physical human-machine interaction. In addition, a novel control methodology, so-called high precision data-driven force control with disturbance observer is adopted in this paper. To assess our proposed control methodology, we compare our novel force control with several other control methodologies on the lower extremity augmentation single leg exoskeleton system. The experiment shows a satisfying result and promising application feasibility of the proposed control methodology.展开更多
We study a stochastic control system involving both a standard and a fractional Brownian motion with Hurst parameter less than 1/2.We apply an anticipative Girsanov transformation to transform the system into another ...We study a stochastic control system involving both a standard and a fractional Brownian motion with Hurst parameter less than 1/2.We apply an anticipative Girsanov transformation to transform the system into another one,driven only by the standard Brownian motion with coefficients depending on both the fractional Brownian motion and the standard Brownian motion.We derive a maximum principle and the associated stochastic variational inequality,which both are generalizations of the classical case.展开更多
基金Supported by by Major State Basic Research Development Program of China ("973" Program, No. 2010CB327800)
文摘A CO2 laser die-cutting system, which does not need die board any more, is a new technique for manufac-turing packing box. Two optical paths, the galvanometer scanning system and the flying optical system, are used to satisfy different processing needs. The scanning system is composed of galvanometer scanning mirrors and F-θ lens. And the flying optical system is driven by two servo motors. This paper presents the software and hardware design of the laser die-cutting system, the difference between the two optical paths, as well as the relationship among the cutting speed, thickness of wrapping paper and laser power. The cutting speed and thickness of wrapping paper are linearly increased by the incremental laser power, while the cutting speed is hyperbolically decreased by the incremental thickness of wrapping paper when the laser power is constant. The amount of incision is reduced by 20% and the processing time by 40% when tested by a low power RF CO2 laser die-cutting system using the optimized program. This tech- nique is also used for the reference of other rapid laser processing systems.
文摘As an important branch in the field of servo control, multi-motor coordination motion control applications are increasingly widespread.For open CNC system requirement, taking DSP as master core, combing with specific integrated stepper motor driver chip LMDI8201T, this designed a serial communication-based new collaborative multi-motor control system, which has characters of highly integrated, good stability, real-time, convenient man-machine interface.The test results show that the system fully meet performance requirements and achieved the motion control functions.
基金Projects(51076027,51036002) supported by the National Natural Science Foundation of ChinaProject(20090092110051) supported by the Doctoral Fund of Ministry of Education of China
文摘Solid oxide fuel cells (SOFCs) are considered to be one of the most important clean,distributed resources. However,SOFCs present a challenging control problem owing to their slow dynamics,nonlinearity and tight operating constraints. A novel data-driven nonlinear control strategy was proposed to solve the SOFC control problem by combining a virtual reference feedback tuning (VRFT) method and support vector machine. In order to fulfill the requirement for fuel utilization and control constraints,a dynamic constraints unit and an anti-windup scheme were adopted. In addition,a feedforward loop was designed to deal with the current disturbance. Detailed simulations demonstrate that the fast response of fuel flow for the current demand disturbance and zero steady error of the output voltage are both achieved. Meanwhile,fuel utilization is kept almost within the safe region.
文摘Pulse width modulation （ PWM） drive control digitalization is the key for the full digital invert power supply. New ideas are proposed, which are based on field programmable gate array （ FPGA ）. First, digital PWM principles are discussed. The primary and secondary current characteristics are analyzed when the transformer is in both normal and magnetic bias conditions. Second, two digitalization methods are put forward after the research on PWM adjustment principles, which are based on the primary current feedback. Though the two methods could restrain magnetic bias, their realization is difficult. A new method is researched on double close-loops to overcome the above shortcomings, which uses the secondary current as the feedback signal and the primary current as the protection signal. Finally, the secondary current control made is discussed and realized. Welding experimental results show that the method has strong flexibility and adaptability, which can be used to realize the full digital welding power supply.
基金Supported in Part by the Australian Research Council Under Grant No.DP0988424
文摘This paper presents a constructive design of new controllers that force underactuated ships under constant or slow time-varying sea loads to asymptotically track a parameterized reference path, that guarantees the distance from the ship to the reference path always be within a specified value. The control design is based on a global exponential disturbance observer, a transformation of the ship dynamics to an almost spherical form, an interpretation of the tracking errors in an earth-fixed frame, an introduction of dynamic variables to compensate for relaxation of the reference path generation, p-times differentiable step functions, and backstepping and Lyapunov＇s direct methods. The effectiveness of the proposed results is illustrated through simulations.
文摘This paper presents a transition-mode zero-voltage-switching inverter for the cooker magnetron of household microwave ovens. The inverter drives a leakage transformer to generate the required high voltage and stabilized current. For achieving zero-voltage switching, a transition-mode driver L6561 is utilized to detect the ending of transformer resonance and drive an insulated-gate-bipolar-transistor. As transistor is conducted, rectified direct-current voltage drives the transformer. While transistor is cut off, transformer resonates with a parallel capacitor. Transistor conduction time and magnetron power are controlled with a 16-bit digital signal controller dsPIC30F4011. For widening the working range, transistor conduction time is set to be inversely changed with line-frequency input voltage. To demonstrate the analysis and design of this paper, a 1 kW inverter circuit is built. Experimental results show the feasibility and usefulness of the designed magnetron power supply.
基金Part of this work was supported by the National Science Foundation of China under Grant No. 51521003.
文摘For human assistance device, the particular properties are usually focused on high precision, compliant interaction, large torque generation and compactness of the mechanical system. To realize the high performance of lower extremity augmentation device, in this paper, we introduce a novel control methodology for compact elastic module. Based on the previous work, the elastic module consists of two parts, i.e., the proximal interaction module and the distal control module. To improve the compactness of the exoskeleton, we only employ the distal control module to achieve both purposes of precision force control and human intention recognition with physical human-machine interaction. In addition, a novel control methodology, so-called high precision data-driven force control with disturbance observer is adopted in this paper. To assess our proposed control methodology, we compare our novel force control with several other control methodologies on the lower extremity augmentation single leg exoskeleton system. The experiment shows a satisfying result and promising application feasibility of the proposed control methodology.
基金supported by National Natural Science Foundation of China(Grant No11301560)
文摘We study a stochastic control system involving both a standard and a fractional Brownian motion with Hurst parameter less than 1/2.We apply an anticipative Girsanov transformation to transform the system into another one,driven only by the standard Brownian motion with coefficients depending on both the fractional Brownian motion and the standard Brownian motion.We derive a maximum principle and the associated stochastic variational inequality,which both are generalizations of the classical case.
