用炉腹煤气量指数和透气阻力系数优化高炉操作

针对邯钢1号高炉稳定性降低、生产指标下滑的状况,高炉生产技术人员积极转变操作理念和思路,运用炉腹煤气量指数和透气阻力系数来优化高炉操作,高炉的稳定性及各项技术经济指标得到明显改善。实践表明,1号高炉炉腹煤气量在7500～7700m3/min、炉腹煤气量指数在59～62m/min、透气阻力系数在3.4～3.7,高炉日产量较调整前提高329 t/d、燃料比降低11 kg/t、焦比降低34 kg/t、煤比提高23 kg/t。

函数式语言中的数组更新(I)

为了能够较好地处理函数式程序设计语言中的I O问题 ,通过采用Monad方法将I O加入到函数式程序设计语言中 ,来保持函数式程序设计语言的优点 .本文探讨了在函数式I

DNA计算机

介绍了有关DNA计算的生物操作,并以实例说明了DNA计算比常规计算的优越性。并从设计DNA计算机的实现技术出发,介绍了建造DNA计算机的主要障碍和解决这些障碍的主要措施。最后阐述了由DNA计算引发的元思考。

CFD numerical simulation of flow velocity characteristics of hydrocyclone

A CFD based numerical simulation of flow velocity of hydrocyclone was conducted with different structural and operational parameters to investigate its distribution characteristics and influencing mechanism. The results show there exist several unsymmetrical envelopes of equal vertical velocities in both upward inner flows and downward outer flows in the hydrocyclone, and the cone angle and apex diameter have remarkable influence on the vertical location of the cone bottom of the envelope of zero vertical velocity. It is also found that the tangential velocity isolines exist in the horizontal planes located in the effective separation region of hydrocyclone. The increase of feed pressure has almost no effect on the distribution characteristics of both vertical velocity and tangential velocity in hydrocyclone, but the magnitude and gradient of tangential velocity are increased obviously to make the motion velocity of high density particles to the wall increased and to make the cyclonic separation effect improved.

离心转子式选粉机的分级性能

通过模型实验，系统地研究了转子转速、处理风量、加料速度等主要操作参数对离心转子式选粉机分级性能的影响规律。结果表明，离心转子式选粉机具有良好的分级性能，为选粉机在实际生产中确定适宜的操作参数提供了理论依据。

Design of research platform on telerobot system based on virtual reality technology

A design strategy for a research platform of a telepresence telerobot system based on virtual reality technology is put forward. The design frame of the system is described, and its important core techniques are described. An octrees data structure is utilized to build kinematic and dynamic modeling of the virtual simulation environment, Delphi+OpenGL+3DS MAX are adopted to carry through the virtual modeling and visible simulation exploitation of the slave-robot and its environment. Photo-correction is adopted to correct positioning deviation of the virtual geometric model and modeling errors. The cost of software and hardware equipment for the research platform realized is low. The master/slave robot (manipulator) system and all software in the system were designed and manufactured by our research group. The performance of the system has reached the level required for research. An indispensable experiment base is provided for the research of a telepresence telerobot system based on virtual reality technology.

Tests on the First 500 kV Compact Transmission Line in China

The paper deals with the tests on the first 500 kV compact transmission line. The transmission line stretches from Fangshan Substation to Changping Substation nearby Beijing with a length of 83 km. In order to investigate the characteristics of the transmission line, many tests were performed on the line before and after its operation. The results indicate that all electrical parameters are perfectly identical to the design.

Numerical Investigation of Hydrodynamic Flow Over an AUV Moving in the Water-surface Vicinity Considering the Laminar-turbulent Transition

Nowadays, Autonomous Underwater Vehicles(AUVs) are frequently used for exploring the oceans. The hydrodynamics of AUVs moving in the vicinity of the water surface are significantly different at higher depths. In this paper, the hydrodynamic coefficients of an AUV in non-dimensional depths of 0.75, 1, 1.5, 2, and 4D are obtained for movement close to the free-surface. Reynolds Averaged Navier Stokes Equations(RANS) are discretized using the finite volume approach and the water-surface effects modeled using the Volume of Fraction(VOF) method. As the operating speeds of AUVs are usually low, the boundary layer over them is not fully laminar or fully turbulent, so the effect of boundary layer transition from laminar to turbulent flow was considered in the simulations. Two different turbulence/transition models were used: 1) a full-turbulence model, the k-ε model, and 2) a turbulence/transition model, Menter's Transition-SST model. The results show that the Menter's Transition-SST model has a better consistency with experimental results. In addition, the wave-making effects of these bodies are studied at different immersion depths in the sea-surface vicinity or at finite depths. It is observed that the relevant pitch moments and lift coefficients are non-zero for these axi-symmetric bodies when they move close to the sea-surface. This is not expected for greater depths.

Effects of operating pressure on the key parameters of coal direct chemical looping combustion

Techno-economic development of chemical looping combustion （CLC） process has been one of the most pursued research areas of the present decade due to its ability to reduce carbon foot print during utilization of coal to generate energy. Based on a 2D computational fluid dynamics model, the present work provides a computational approach to study the effect of operating pressure--a key parameter in designing of CLC reactors, on optimum operating conditions. The effects of operating pressure have been examined in terms of reactors temperature, percentage of fuel conversion and purity of carbon dioxide in fuel reactor exhaust. The simulated results show qualitative agreement with the trends obtained by other investigators during experimental studies.

Exact Solution for Phenomenon of atomic Collapse and Revival under Rotating Wave and Anti-Rotating Wave Approximation

An accurate method to solve the daynes Cummings （J-C） Hamiltonian has been investigated here. The phenomenon of atomic collapse and revival predicted by Jaynes-Cummings model is demonstrated. Solutions are consis- tent with the precious such as using the operator method. Furthermore, the Jaynes-Cummings Hamiltonian including the anti-rotating term is also solved precisely using this accurate way so that results agree with experiments better. Essences of the anti-rotating term are revealed. We discuss the relations of the phenomenon of atomic collapse and revival with the average photons number, the light field phase angle, the resonant frequency, and the size of coupling constant. The discussions may make one select suitable conditions to carry out experiment well and study the virtual light field effect on cavity quantum electrodynamics.

Ozonation of o-phenylenediamine in the presence of hydrogen peroxide by high-gravity technology

The study herein investigated the effectiveness of simultaneous use of ozone and hydrogen peroxide(O_3/H_2O_2 process) to degrade o-phenylenediamine(o-PDA) in a simulated wastewater. A rotor–stator reactor(RSR) was employed to create a high-gravity environment in order to enhance ozone-liquid mass transfer rate and possibly improve the degradation rate of o-PDA. The degradation efficiency of o-PDA(η) as well as the overall gas-phase volumetric mass transfer coefficient(KGa) were determined under different operating conditions of H_2O_2 concentration, initial o-PDA concentration, temperature of reaction, initial p H and rotation speed of RSR in attempt to establish the optimal conditions. Chemical oxygen demand reduction rate(rCOD) of wastewater treated at a particular set of conditions was also analyzed. Additionally, the intermediate products of degradation were identified using a gas chromatography-mass spectrometer(GC/MS) to further evaluate the extent of o-PDA degradation as well as establish its possible degradation pathway. Results were validated by comparison with those of sole use of ozone(O_3 process), and it was noted that η, KGa and rCODachieved by O_3/H_2O_2 process was 24.4%,31.6% and 25.2% respectively higher than those of O_3 process, indicating that H_2O_2 can greatly enhance ozonation of o-PDA. This work further demonstrates that an RSR can significantly intensify ozone-liquid mass transfer rate and thus provides a feasible intensification means for the ozonation of o-PDA as well as other recalcitrant organics.

Heat Transfer Investigation and Modeling of Heat Integrated Distillation Column

The high degree of reversibility of heat integrated distillation column(HIDiC) has been thermodynamically interpreted by the entropy method. In this paper, a heat transfer model and a more universal method were proposed, through which the overall heat transfer coefficient at different height of column under different operating conditions could be obtained before the experiment. Then the separation of a binary ethanol-water system was carried out experimentally as a case study to verify the heat transfer model and the aforementioned calculation method. The close results between the calculation, the simulation, and the experiments suggested that the proposed model and the calculation method in this paper were accurate and applicable. Meanwhile, it was demonstrated that the HIDiC shows obvious effect of reducing entropy increase and improving thermodynamic efficiency as compared to conventional distillation column.

A novel two-stage Lagrangian decomposition approach for refinery production scheduling with operational transitions in mode switching

To address large scale industrial processes,a novel Lagrangian scheme is proposed to decompose a refinery scheduling problem with operational transitions in mode switching into a production subproblem and a blending and delivery subproblem.To accelerate the convergence of Lagrange multipliers,some auxiliary constraints are added in the blending and delivery subproblem.A speed-up scheme is presented to increase the efficiency for solving the production subproblem.An initialization scheme of Lagrange multipliers and a heuristic algorithm to find feasible solutions are designed.Computational results on three cases with different lengths of time horizons and different numbers of orders show that the proposed Lagrangian scheme is effective and efficient.

Oxidative Desulfurization of Non-hydrotreated Kerosene Using Hydrogen Peroxide and Acetic Acid

The oxidative desulfurization of a real refinery feedstock (i.e.,non-hydrotreated kerosene with total sulfur mass content of 0.16%) with a mixture of hydrogen peroxide and acetic acid was studied.The influences of various operating parameters including reaction temperature (T),acid to sulfur molar ratio (nacid/nS),and oxidant to sulfur molar ratio (nO/nS) on the sulfur removal of kerosene were investigated.The results revealed that an increase in the reaction temperature (T) and nacid/nS enhances the sulfur removal.Moreover,there is an optimum nO/nS related to the reaction temperature and the best sulfur removal could be obtained at nO/nS=8 and 23 for the reaction temperatures of 25 and 60°C,respectively.The maximum observed sulfur removal in the present oxidative desulfurization system was 83.3%.

KING GEORGE ISLAND SPATIAL DATA MODEL

Distribution,interoperability,interactivity,component are four main features of distributed GIS.Based on the principle of hypermap,hypermedia and distributed database,the paper comes up with a kind of distributed spatial data model which is in accordance with those features of distributed GIS.The model takes catalog service as the outline of spatial information globalization,and defines data structure of hypermap node in different level.Based on the model,it is feasible to manage and process distributed spatial information,and integrate multi_source,heterogeneous spatial data into a framework.Traditionally,to retrieve and access spatial data via Internet is only by theme or map name.With the concept of the model,it is possible to retrieve,load,and link spatial data by vector_based graphics on the Internet.

Formation of crystalline particles from phase change emulsion： Influence of different parameters

Solidification or crystallization of phase change emulsion in the form of fine emulsion drops in a direct contact coolant at temperatures below their freezing point was studied. This work is mainly focused on the size and shape of the generated partides from phase change emulsified fats. Size of the particles is the major or key factor being considered during their formation, however, other factors that govern the particle size and shape were also observed. The operating parameters of the process were optimized in order to obtain particles of smaller size ranges in the window of current operating conditions. The crystallization of complex emulsion maffices is very difficult to control in the bulk at desired requirement. Hence, the emulsion drop to particle formation has advan- tage in comparison with the bulk solidification or crystallization. The main objective of this work is to achieve spherical emulsion particles in a direct contact cooling system. Parameters like： stat）ility, characterization, viscos- ity, and the effect of different energy inputs were examined. Moreover, the effects of the capillary size, interracial tension, temperature of the emulsion on the particle size were also monitrored.

Influence of operation number on arc erosion behavior of Ag/Ni electrical contact materials

Arc erosion behavior of Ag/Ni materials with different operation numbers was investigated by OM,3DOP and SEM.The results indicated that the arc erosion of Ag/10Ni electrical contact material fabricated by sintering−extrusion technology was more and more serious with the operation numbers increasing from 1000 to 40000.With the same operation numbers,the arc erosion on anode was more serious than that on cathode.Besides,the pores preferred to emerge around the arc effect spot during the first 10000 operations.And the morphology of the molten silver on cathode and anode was different due to the action of gravity and arc erosion.Furthermore,the relationships among arc energy,arc time,welding force,electric resistivity,temperature and mass change on contacts were discussed,which indicated that the mass loss on cathode was mainly caused by the fracture of molten bridge.

Pervaporation Separation of Butanol-Water Mixtures Using Polydimethylsiloxane/Ceramic Composite Membrane

Pervaporation has attracted considerable interest owing to its potential application in recovering biobutanol from biomass acetone-butanol-ethanol (ABE) fermentation broth. In this study, butanol was recovered from its aqueous solution using a polydimethylsiloxane (PDMS)/ceramic composite pervaporation membrane. The effects of operating temperature, feed concentration, feed flow rate and operating time on the membrane pervaporation performance were investigated. It was found that with the increase of temperature or butanol concentration in the feed, the total flux through the membrane increased while the separation factor decreased slightly. As the feed flow rate increased, the total flux increased gradually while the separation factor changed little. At 40°C and 1% (by mass) butanol in the feed, the total flux and separation factor of the membrane reached 457.4 g·m?2·h?1 and 26.1, respectively. The membrane with high flux is suitable for recovering butanol from ABE fermentation broth.

Optimization of Parameters for Melt Crystallization of p-Cresol

Laboratory-scale experiments were carried out to evaluate the influences of operational parameters on the melt crystallization efficiency for p-cresol purification.The optimal crystallization conditions were determined:dynamic pulsed aeration at 90 L·h-1 and the cooling rate of 0.6-0.8 ℃·min-1,followed by sweating at 0.2-0.3 ℃·min-1 for 40 min.Results also demonstrate that the melt crystallization efficiency is sensitive to feed concentration,which highlights this technology for separation and purification of high purity products.

Pest Detection Method Using Multi-Fractal Analysis

A novel method for pest detection is proposed based on the theory of multi-fractal spectrum to extract pests on plant leaves.Both local and global information of the image regularity were obtained by multi-fractal analysis.By applying fractal dimension,the spots on leaf images can be extracted without loosing or introducing any information.The different parts of images are re-analysis by morphology operations to determine the candidate regions of pests.The performance of multi-fractal analysis of whitefly detection is investigated through greenhouse experiments.The experimental results show that the proposed method is robust to noise from light and is not sensitive to the complex environment.