设计了一种基于0.7μm的In P HBT工艺设计的12位8GSps的电流舵型数模转换器(DAC)。采用双采样技术,将输出采样率提高为时钟频率的两倍。并且将双采样开关与电流开关分离以减小码间串扰。借鉴常开电流源法改进了电流源开关结构。新的结...设计了一种基于0.7μm的In P HBT工艺设计的12位8GSps的电流舵型数模转换器(DAC)。采用双采样技术,将输出采样率提高为时钟频率的两倍。并且将双采样开关与电流开关分离以减小码间串扰。借鉴常开电流源法改进了电流源开关结构。新的结构增大了输出阻抗和稳定性,抑制了谐波失真,提高了芯片动态性能。通过仿真结果得到,这款芯片功耗2.45 W,实现了0.4 LSB的微分非线性误差(DNL)和0.35 LSB的积分非线性误差(INL)。低频下无杂散动态范围(SFDR)为71.53 d Bc,信号频率接近奈奎斯特频率时最差的SFDR为50.54 d Bc。在整个第一奈奎斯特域内,SFDR都大于50 d Bc,满足高端测试仪器的应用要求。展开更多
随着雷达信号处理技术的发展,对于宽带线性调频(Linear Frequency Modulation)信号发生器的需求也变得十分迫切。基于Xilinx公司的直接数字频率合成(Direct Digital frequency Synthesis,DDS)IP核和高速数模转换器(Digital-to-Analog Co...随着雷达信号处理技术的发展,对于宽带线性调频(Linear Frequency Modulation)信号发生器的需求也变得十分迫切。基于Xilinx公司的直接数字频率合成(Direct Digital frequency Synthesis,DDS)IP核和高速数模转换器(Digital-to-Analog Converter,DAC)的架构,设计了一种可实时切换参数的多相宽带线性调频信号发生器,并完成仿真和上板验证。经仿真和上板验证,该信号发生器能够根据任务要求实时切换线性调频信号的参数,生成的信号指标准确,实现方法可靠,具有一定的实用价值。展开更多
A high speed column-parallel CDS/ADC circuit with nonlinearity compensation is proposed in this paper.The correlated double sampling (CDS) and analog-to-digital converter (ADC) functions are integrated in a threephase...A high speed column-parallel CDS/ADC circuit with nonlinearity compensation is proposed in this paper.The correlated double sampling (CDS) and analog-to-digital converter (ADC) functions are integrated in a threephase column-parallel circuit based on two floating gate inverters and switched-capacitor network.The conversion rate of traditional single-slope ADC is speeded up by dividing quantization to coarse step and fine step.A storage capacitor is used to store the result of coarse step and locate the section of ramp signal of fine step,which can reduce the clock step from 2 n to 2 (n/2+1).The floating gate inverters are implemented to reduce the power consumption.Its induced nonlinear offset is cancelled by introducing a compensation module to the input of inverter,which can equalize the coupling path in three phases of the proposed circuit.This circuit is designed and simulated for CMOS image sensor with 640×480 pixel array using Chartered 0.18μm process.Simulation results indicate that the resolution can reach 10-bit and the maximum frame rate can reach 200 frames/s with a main clock of 10MHz.The power consumption of this circuit is less than 36.5μW with a 3.3V power supply.The proposed CDS/ADC circuit is suitable for high resolution and high speed image sensors.展开更多
文摘设计了一种基于0.7μm的In P HBT工艺设计的12位8GSps的电流舵型数模转换器(DAC)。采用双采样技术,将输出采样率提高为时钟频率的两倍。并且将双采样开关与电流开关分离以减小码间串扰。借鉴常开电流源法改进了电流源开关结构。新的结构增大了输出阻抗和稳定性,抑制了谐波失真,提高了芯片动态性能。通过仿真结果得到,这款芯片功耗2.45 W,实现了0.4 LSB的微分非线性误差(DNL)和0.35 LSB的积分非线性误差(INL)。低频下无杂散动态范围(SFDR)为71.53 d Bc,信号频率接近奈奎斯特频率时最差的SFDR为50.54 d Bc。在整个第一奈奎斯特域内,SFDR都大于50 d Bc,满足高端测试仪器的应用要求。
文摘随着雷达信号处理技术的发展,对于宽带线性调频(Linear Frequency Modulation)信号发生器的需求也变得十分迫切。基于Xilinx公司的直接数字频率合成(Direct Digital frequency Synthesis,DDS)IP核和高速数模转换器(Digital-to-Analog Converter,DAC)的架构,设计了一种可实时切换参数的多相宽带线性调频信号发生器,并完成仿真和上板验证。经仿真和上板验证,该信号发生器能够根据任务要求实时切换线性调频信号的参数,生成的信号指标准确,实现方法可靠,具有一定的实用价值。
基金Supported by National Natural Science Foundation of China (No.60806010,No.60976030)
文摘A high speed column-parallel CDS/ADC circuit with nonlinearity compensation is proposed in this paper.The correlated double sampling (CDS) and analog-to-digital converter (ADC) functions are integrated in a threephase column-parallel circuit based on two floating gate inverters and switched-capacitor network.The conversion rate of traditional single-slope ADC is speeded up by dividing quantization to coarse step and fine step.A storage capacitor is used to store the result of coarse step and locate the section of ramp signal of fine step,which can reduce the clock step from 2 n to 2 (n/2+1).The floating gate inverters are implemented to reduce the power consumption.Its induced nonlinear offset is cancelled by introducing a compensation module to the input of inverter,which can equalize the coupling path in three phases of the proposed circuit.This circuit is designed and simulated for CMOS image sensor with 640×480 pixel array using Chartered 0.18μm process.Simulation results indicate that the resolution can reach 10-bit and the maximum frame rate can reach 200 frames/s with a main clock of 10MHz.The power consumption of this circuit is less than 36.5μW with a 3.3V power supply.The proposed CDS/ADC circuit is suitable for high resolution and high speed image sensors.
