A new kind of process sintering process is dealt with manufacturing hammers of the hammer mill. Metallurgical products and single factor parameters are systematically studied in this paper. One element experiments a...A new kind of process sintering process is dealt with manufacturing hammers of the hammer mill. Metallurgical products and single factor parameters are systematically studied in this paper. One element experiments and orthogonal design experiments are carried out to achieve optimized parameters. Experimental results provide important theoretical guidance and experimental data for its further application.展开更多
The popularization of large scale central air conditioning system (CACS) has brought forward a new pro blem,i.e. how to measure the cooling and heating quantum accurately. This problem will directly affect the qua ...The popularization of large scale central air conditioning system (CACS) has brought forward a new pro blem,i.e. how to measure the cooling and heating quantum accurately. This problem will directly affect the qua lity of modern property management. So the study on the technology of measuring heat and cool is very necessary. In this paper, the detailed thermal analysis and the mathematical model of relative parameters that affect the measurement of heat and cool are discussed. A sample instrument based on the model is made, After the trial use by several customers, the device is proved to be practical, worthwhile and of good capacity.展开更多
This work deals with a description of an elastic analysis of eolic blade （preprocessing, processing and post-processing stages）. The eolic blade geometry is approximated by flat finite elements in which the membrane...This work deals with a description of an elastic analysis of eolic blade （preprocessing, processing and post-processing stages）. The eolic blade geometry is approximated by flat finite elements in which the membrane effects are evaluated using the FF （free formulation） finite element and the flexure effects are calculated using DKT （discrete shear triangle） finite element. The pre-processing stage is implemented using OpenGL library, to provide the graphical construction for geometry, mesh orientation, and other requirements of the finite element model. For the processing stage is built a specific dll （dynamic link library） library implemented in C＋＋ language for the FF and DKT elements analysis. The post-processing stage has been built using specific dialogs to present all results in the graphic interface, where the static displacements of the eolic blade model are shown.展开更多
Due to the widespread computer technology, it is difficult to imagine a research or a control of any physical object without using a powerful hardware and software applications. To use digital technologies we need to ...Due to the widespread computer technology, it is difficult to imagine a research or a control of any physical object without using a powerful hardware and software applications. To use digital technologies we need to collect data of a real world in digital system by the analog-to-digital converters. Taking into account the relative high computational capabilities of modern microcontrollers the article proposes a multirate processing system. The paper presents practical design aspects of the analog and digital anti-aliasing filter fbr the measurement path. having regarded the real possibilities and limitations of today＇s filters and analog-to-digital embedded converters.展开更多
In this paper, the configuration characteristic of the safe parameter measurement and alarm system in new type mine was first simply introduced, which is made up of topological structure and combines wire communicatio...In this paper, the configuration characteristic of the safe parameter measurement and alarm system in new type mine was first simply introduced, which is made up of topological structure and combines wire communication with radio communication, then introduced respectively the hardware and software construction and the working principle and the method of design, which is composed of detecting instrument as the core of enhanced single chip microcomputer AT89S8252 and relay station and CPU which consists of IPC. The three class computer communication system that integrates with measurement and alarm and management works reliably and uses conveniently, especially to thesystem of parameter detecting and alarm in mine, which is adapted to measure dispersedly and manage intensively.展开更多
A method of implementing high cost-effective and highly integrated digital lock-in amplifier with microcontroller is discussed. And the digital lock-in amplifier is more suitable for meastwing lowfrequency weak signal...A method of implementing high cost-effective and highly integrated digital lock-in amplifier with microcontroller is discussed. And the digital lock-in amplifier is more suitable for meastwing lowfrequency weak signal. Digital signal sequence is obtained through sampling signal measured over an integer number of signal periods, but digital reference sequence is acquired through mathematical operation, then digital phase sensitive detection can be implemented by calculating the cross-correlation function of digital signal sequence and digital reference sequence. In addition, the frequency response and phase character of the digital lock-in amplifier is analyzed. Finally, the designed digital lock-in amplifier is achieved. Expermental results show that the digital lock-in amplifier can be used for measuring weak signal with low ignal-to-noise ratio.展开更多
In the jet engine, icing phenomena occur primarily on the fan blades, the FEGVs （fan exit guide vanes）, the splitter, and the low-pressure compressor. Accreted ice disturbs the inlet flow and causes large energy los...In the jet engine, icing phenomena occur primarily on the fan blades, the FEGVs （fan exit guide vanes）, the splitter, and the low-pressure compressor. Accreted ice disturbs the inlet flow and causes large energy losses. In addition, ice accreted on a fan rotor can be shed from the blade surface due to centrifugal force and can damage compressor components. This phenomenon, which is typical in turbomachinery, is referred to as ice shedding. Although existing icing models can simulate ice growth, these models do not have the capability to reproduce ice shedding. In the present study, we develop an icing model that takes into account both ice growth and ice shedding. Furthermore, we have validated the proposed ice shedding model through the comparison of numerical results and experimental data, which include the flow rate loss due to ice growth and the flow rate recovery due to ice shedding. The simulation results for the time at which ice shedding occurred and what were obtained using the proposed ice shedding model were in good agreement with the experimental results.展开更多
the system to DC voltage source as the core, AT89C52 MCU as the main controller, the output voltage to set the DC power supply through the keyboard, with a step function voltage to reality, the actual output value. Th...the system to DC voltage source as the core, AT89C52 MCU as the main controller, the output voltage to set the DC power supply through the keyboard, with a step function voltage to reality, the actual output value. This design is divided into four modules： SCM control and display module, digital to analog （D/A） conversion module, a constant voltage source module, output module. MCU control module as the core, the input signal is converted to digital quantity output; constant current source module voltage D/A conversion to analog conversion into constant pressure through a constant voltage circuit. The system has good reliability, high precision.展开更多
Based on the Joukowsky transformation and Theodorsen method, a novel parametric function （shape function） for wind turbine airfoils has been developed. The airfoil design space and shape control equations also have ...Based on the Joukowsky transformation and Theodorsen method, a novel parametric function （shape function） for wind turbine airfoils has been developed. The airfoil design space and shape control equations also have been studied. Results of the analysis of a typical wind turbine airfoil are shown to illustrate the evaluation process and to demonstrate the rate of convergence of the geometric characteristics. The coordinates and aerodynamic performance of approximate airfoils is rapidly close to the baseline airfoil corresponding to increasing orders of polynomial. Comparison of the RFOIL prediction and experimental results for the baseline airfoil generally show good agreement. A universal method for three-dimensional blade integration-＂ Shape function/Distribution function＂ is presented. By changing the parameters of shape function and distribution functions, a three dimensional blade can be designed and then transformed into the physical space in which the actual geometry is defined. Application of this method to a wind turbine blade is presented and the differences of power performance between the represented blade and original one are less than 0. 5%. This method is particularly simple and convenient for bodies of streamline forms.展开更多
As an important branch in the field of servo control, multi-motor coordination motion control applications are increasingly widespread.For open CNC system requirement, taking DSP as master core, combing with specific ...As an important branch in the field of servo control, multi-motor coordination motion control applications are increasingly widespread.For open CNC system requirement, taking DSP as master core, combing with specific integrated stepper motor driver chip LMDI8201T, this designed a serial communication-based new collaborative multi-motor control system, which has characters of highly integrated, good stability, real-time, convenient man-machine interface.The test results show that the system fully meet performance requirements and achieved the motion control functions.展开更多
It is important to study the pressure distribution on the blade and in the adjacent area while searching the power augmentation theory with adding a tip vane to the wind turbine. This paper shows the CFD simulation re...It is important to study the pressure distribution on the blade and in the adjacent area while searching the power augmentation theory with adding a tip vane to the wind turbine. This paper shows the CFD simulation relationship of the pressure distribution on the rotor blade and in the adjacent area, after calculating the pressure of the different chordwise and spanwise point on the blade with the tip vane-V（8.8×8） and without the tip vane under tip speed ratio λ 4.5. Combining the isobaric section figure in certain location, it can be seen that the tip vane improve the pressure difference between pressure and suction surface. The most influenced zone is found and these can further display the power augmentation theory of the wind turbine using the tip vane. The simulation calculation was based on N-S equations. 3-D, steady, implicit solver was chosen. Turbulence model was k-ω SST. Discretization scheme is SECOND ORDER UPWIND. Pressure-velocity coupling was a typical SIMPLE scheme. In the whole grid system, two-divided grid formation was adopted, that is, inner region and outer region. Inner region including rectangular solid blade and neighboring, outer region is semi-cylinder. There were together 720,000 nodes with tetra-prism unstructured mesh.展开更多
To give an insight into the clocking effect and its influence on the wake transportation and its interaction, the unsteady three-dimensional flow through a 1.5-stage axial low pressure turbine is simulated numerically...To give an insight into the clocking effect and its influence on the wake transportation and its interaction, the unsteady three-dimensional flow through a 1.5-stage axial low pressure turbine is simulated numerically by using a density-correction based, Reynolds-Averaged Navier-Stokes equations commercial CFD code. The 2nd stator clocking is applied over ten equal tangential positions. The results show that the harmonic blade number ratio is an important factor affecting the clocking effect. The clocking effect has very small influence on the turbine efficiency in this investigation. The difference between the maximum and minimum efficiency is about 0.1%. The maximum efficiency can be achieved when the 1st stator wake enters the 2nd stator passage near blade suction surface and its adjacent wake passes through the 2nd stator passage close to blade pressure surface. The minimum efficiency appears if the 1st stator wake impinges upon the leading edge of the 2nd stator and its adjacent wake of the 1st stator passes through the mid-channel in the 2nd stator. The wake convective transportation and the blade circulation variation due to its impingement on the subsequent blade are the main mechanism affecting the pressure variation in blade surface.展开更多
The present paper describes an optimization methodology for aerodynamic design of turbomachinery combined with a rapid 3D blade and grid generator （RAPID3DGRID）, a N.S. solver, a blade parameterization method （BPM...The present paper describes an optimization methodology for aerodynamic design of turbomachinery combined with a rapid 3D blade and grid generator （RAPID3DGRID）, a N.S. solver, a blade parameterization method （BPM）, a gradient-based parameterization-analyzing method （GPAM）, a response surface method （RSM） with zooming algorithm and a simple gradient method. By the use of blade parameterization method a transonic com- pressor rotor can be expressed by a set of polynomials, and then it enables us to transform coordinate-expressed blade data to parameter-expressed and then to reduce the number of parameters. With changing any one of the parameters and by applying grid generator and N.S. solver, we can obtain several groups of samples. Here only ten parameters were considered to search an optimized compressor rotor. As a result of optimization, the adiabatic efficiency was increased by 1.73%.展开更多
Today, the most commonly used bi-directional airfoil in hydraulic machinery is the S-shaped airfoil(SA). A new bi-directional airfoil, obtained by lowering the bent airfoil camber and thickening the bone line bi-direc...Today, the most commonly used bi-directional airfoil in hydraulic machinery is the S-shaped airfoil(SA). A new bi-directional airfoil, obtained by lowering the bent airfoil camber and thickening the bone line bi-directionally, is proposed. Two bi-directional axial flow pumps, with the SA blades and the arc airfoil(AA) blades, respectively, were designed to verify the applicability of this airfoil. By comparing the hydraulic performances of the two pumps obtained from the experiments, and the cavitation performance and flow field of the two pumps obtained from numerical simulations, it was found that AA blades can improve both the hydraulic and cavitation performances under a low flow rate and near the best efficiency flow point(BEP), whether in forward or reverse operation for the bi-directional axial-flow pump. Furthermore, the hydraulic performance of the AA blade pump declines sharply in a large flow rate compared to that of the SA blade pump. The location and composition of the inhomogeneous flows inside the impellers of the two pumps are similar. However, the SA blades work on fluid, mainly at the front half of the blades, which is a distinctive feature from the AA blades and may be a universal phenomenon in all SA-type blades.展开更多
文摘A new kind of process sintering process is dealt with manufacturing hammers of the hammer mill. Metallurgical products and single factor parameters are systematically studied in this paper. One element experiments and orthogonal design experiments are carried out to achieve optimized parameters. Experimental results provide important theoretical guidance and experimental data for its further application.
文摘The popularization of large scale central air conditioning system (CACS) has brought forward a new pro blem,i.e. how to measure the cooling and heating quantum accurately. This problem will directly affect the qua lity of modern property management. So the study on the technology of measuring heat and cool is very necessary. In this paper, the detailed thermal analysis and the mathematical model of relative parameters that affect the measurement of heat and cool are discussed. A sample instrument based on the model is made, After the trial use by several customers, the device is proved to be practical, worthwhile and of good capacity.
文摘This work deals with a description of an elastic analysis of eolic blade （preprocessing, processing and post-processing stages）. The eolic blade geometry is approximated by flat finite elements in which the membrane effects are evaluated using the FF （free formulation） finite element and the flexure effects are calculated using DKT （discrete shear triangle） finite element. The pre-processing stage is implemented using OpenGL library, to provide the graphical construction for geometry, mesh orientation, and other requirements of the finite element model. For the processing stage is built a specific dll （dynamic link library） library implemented in C＋＋ language for the FF and DKT elements analysis. The post-processing stage has been built using specific dialogs to present all results in the graphic interface, where the static displacements of the eolic blade model are shown.
文摘Due to the widespread computer technology, it is difficult to imagine a research or a control of any physical object without using a powerful hardware and software applications. To use digital technologies we need to collect data of a real world in digital system by the analog-to-digital converters. Taking into account the relative high computational capabilities of modern microcontrollers the article proposes a multirate processing system. The paper presents practical design aspects of the analog and digital anti-aliasing filter fbr the measurement path. having regarded the real possibilities and limitations of today＇s filters and analog-to-digital embedded converters.
文摘In this paper, the configuration characteristic of the safe parameter measurement and alarm system in new type mine was first simply introduced, which is made up of topological structure and combines wire communication with radio communication, then introduced respectively the hardware and software construction and the working principle and the method of design, which is composed of detecting instrument as the core of enhanced single chip microcomputer AT89S8252 and relay station and CPU which consists of IPC. The three class computer communication system that integrates with measurement and alarm and management works reliably and uses conveniently, especially to thesystem of parameter detecting and alarm in mine, which is adapted to measure dispersedly and manage intensively.
文摘A method of implementing high cost-effective and highly integrated digital lock-in amplifier with microcontroller is discussed. And the digital lock-in amplifier is more suitable for meastwing lowfrequency weak signal. Digital signal sequence is obtained through sampling signal measured over an integer number of signal periods, but digital reference sequence is acquired through mathematical operation, then digital phase sensitive detection can be implemented by calculating the cross-correlation function of digital signal sequence and digital reference sequence. In addition, the frequency response and phase character of the digital lock-in amplifier is analyzed. Finally, the designed digital lock-in amplifier is achieved. Expermental results show that the digital lock-in amplifier can be used for measuring weak signal with low ignal-to-noise ratio.
文摘In the jet engine, icing phenomena occur primarily on the fan blades, the FEGVs （fan exit guide vanes）, the splitter, and the low-pressure compressor. Accreted ice disturbs the inlet flow and causes large energy losses. In addition, ice accreted on a fan rotor can be shed from the blade surface due to centrifugal force and can damage compressor components. This phenomenon, which is typical in turbomachinery, is referred to as ice shedding. Although existing icing models can simulate ice growth, these models do not have the capability to reproduce ice shedding. In the present study, we develop an icing model that takes into account both ice growth and ice shedding. Furthermore, we have validated the proposed ice shedding model through the comparison of numerical results and experimental data, which include the flow rate loss due to ice growth and the flow rate recovery due to ice shedding. The simulation results for the time at which ice shedding occurred and what were obtained using the proposed ice shedding model were in good agreement with the experimental results.
文摘the system to DC voltage source as the core, AT89C52 MCU as the main controller, the output voltage to set the DC power supply through the keyboard, with a step function voltage to reality, the actual output value. This design is divided into four modules： SCM control and display module, digital to analog （D/A） conversion module, a constant voltage source module, output module. MCU control module as the core, the input signal is converted to digital quantity output; constant current source module voltage D/A conversion to analog conversion into constant pressure through a constant voltage circuit. The system has good reliability, high precision.
基金Supported by the National Natural Science Foundation of China （ No. 50775227 ） and the Natural Science Foundation of Chongqing （ No. CSTC, 2008BC3029）.
文摘Based on the Joukowsky transformation and Theodorsen method, a novel parametric function （shape function） for wind turbine airfoils has been developed. The airfoil design space and shape control equations also have been studied. Results of the analysis of a typical wind turbine airfoil are shown to illustrate the evaluation process and to demonstrate the rate of convergence of the geometric characteristics. The coordinates and aerodynamic performance of approximate airfoils is rapidly close to the baseline airfoil corresponding to increasing orders of polynomial. Comparison of the RFOIL prediction and experimental results for the baseline airfoil generally show good agreement. A universal method for three-dimensional blade integration-＂ Shape function/Distribution function＂ is presented. By changing the parameters of shape function and distribution functions, a three dimensional blade can be designed and then transformed into the physical space in which the actual geometry is defined. Application of this method to a wind turbine blade is presented and the differences of power performance between the represented blade and original one are less than 0. 5%. This method is particularly simple and convenient for bodies of streamline forms.
文摘As an important branch in the field of servo control, multi-motor coordination motion control applications are increasingly widespread.For open CNC system requirement, taking DSP as master core, combing with specific integrated stepper motor driver chip LMDI8201T, this designed a serial communication-based new collaborative multi-motor control system, which has characters of highly integrated, good stability, real-time, convenient man-machine interface.The test results show that the system fully meet performance requirements and achieved the motion control functions.
基金Project 50566001 supported by NSFCProject 200308020207 supported by Inner Mongolia Autono- mous Region Natural Science Foundation of China.
文摘It is important to study the pressure distribution on the blade and in the adjacent area while searching the power augmentation theory with adding a tip vane to the wind turbine. This paper shows the CFD simulation relationship of the pressure distribution on the rotor blade and in the adjacent area, after calculating the pressure of the different chordwise and spanwise point on the blade with the tip vane-V（8.8×8） and without the tip vane under tip speed ratio λ 4.5. Combining the isobaric section figure in certain location, it can be seen that the tip vane improve the pressure difference between pressure and suction surface. The most influenced zone is found and these can further display the power augmentation theory of the wind turbine using the tip vane. The simulation calculation was based on N-S equations. 3-D, steady, implicit solver was chosen. Turbulence model was k-ω SST. Discretization scheme is SECOND ORDER UPWIND. Pressure-velocity coupling was a typical SIMPLE scheme. In the whole grid system, two-divided grid formation was adopted, that is, inner region and outer region. Inner region including rectangular solid blade and neighboring, outer region is semi-cylinder. There were together 720,000 nodes with tetra-prism unstructured mesh.
基金supported by China Postdoctoral Science Foundation(Grant No.20100470694)Shanghai Postdoctoral Sustentation Fund,China(GrantNo.11R21413800)
文摘To give an insight into the clocking effect and its influence on the wake transportation and its interaction, the unsteady three-dimensional flow through a 1.5-stage axial low pressure turbine is simulated numerically by using a density-correction based, Reynolds-Averaged Navier-Stokes equations commercial CFD code. The 2nd stator clocking is applied over ten equal tangential positions. The results show that the harmonic blade number ratio is an important factor affecting the clocking effect. The clocking effect has very small influence on the turbine efficiency in this investigation. The difference between the maximum and minimum efficiency is about 0.1%. The maximum efficiency can be achieved when the 1st stator wake enters the 2nd stator passage near blade suction surface and its adjacent wake passes through the 2nd stator passage close to blade pressure surface. The minimum efficiency appears if the 1st stator wake impinges upon the leading edge of the 2nd stator and its adjacent wake of the 1st stator passes through the mid-channel in the 2nd stator. The wake convective transportation and the blade circulation variation due to its impingement on the subsequent blade are the main mechanism affecting the pressure variation in blade surface.
文摘The present paper describes an optimization methodology for aerodynamic design of turbomachinery combined with a rapid 3D blade and grid generator （RAPID3DGRID）, a N.S. solver, a blade parameterization method （BPM）, a gradient-based parameterization-analyzing method （GPAM）, a response surface method （RSM） with zooming algorithm and a simple gradient method. By the use of blade parameterization method a transonic com- pressor rotor can be expressed by a set of polynomials, and then it enables us to transform coordinate-expressed blade data to parameter-expressed and then to reduce the number of parameters. With changing any one of the parameters and by applying grid generator and N.S. solver, we can obtain several groups of samples. Here only ten parameters were considered to search an optimized compressor rotor. As a result of optimization, the adiabatic efficiency was increased by 1.73%.
基金supported by the Production,Education and Scientific Research Program of the Baoshan District,Shanghai City(Grant No.CXY2012-12)
文摘Today, the most commonly used bi-directional airfoil in hydraulic machinery is the S-shaped airfoil(SA). A new bi-directional airfoil, obtained by lowering the bent airfoil camber and thickening the bone line bi-directionally, is proposed. Two bi-directional axial flow pumps, with the SA blades and the arc airfoil(AA) blades, respectively, were designed to verify the applicability of this airfoil. By comparing the hydraulic performances of the two pumps obtained from the experiments, and the cavitation performance and flow field of the two pumps obtained from numerical simulations, it was found that AA blades can improve both the hydraulic and cavitation performances under a low flow rate and near the best efficiency flow point(BEP), whether in forward or reverse operation for the bi-directional axial-flow pump. Furthermore, the hydraulic performance of the AA blade pump declines sharply in a large flow rate compared to that of the SA blade pump. The location and composition of the inhomogeneous flows inside the impellers of the two pumps are similar. However, the SA blades work on fluid, mainly at the front half of the blades, which is a distinctive feature from the AA blades and may be a universal phenomenon in all SA-type blades.
