Mg-6Al-0.3Mn-xY(x=0,0.3,0.6 and 0.9,mass fraction,%) magnesium alloys were prepared by casting and hot rolling process.The influence of yttrium on microstructure and tensile mechanical properties of the AM60 magnesium...Mg-6Al-0.3Mn-xY(x=0,0.3,0.6 and 0.9,mass fraction,%) magnesium alloys were prepared by casting and hot rolling process.The influence of yttrium on microstructure and tensile mechanical properties of the AM60 magnesium alloy was investigated.The results reveal that with increasing the yttrium content,Al2Y precipitates form and the grain size is reduced.The ultimate strength,yield strength and elongation at room temperature are 192 MPa,62 MPa and 12.6%,respectively,for the as-cast Mg-6Al-0.3Mn-0.9Y alloy.All these properties are improved obviously by hot rolling,and the values are up to 303 MPa,255 MPa and 17.1%,respectively,for the rolled Mg-6Al-0.3Mn-0.9Y alloy.The improvement of mechanical properties is attributed to continuous dynamic recrystallization and the existence of highly thermal stable Al2Y precipitate which impedes the movement of dislocation effectively.展开更多
In this paper, numerical method is used als. A typical unit of masonry is selected to serve merical model of RVE is established with detailed to study the strain rate effect on masonry materias a representative volume...In this paper, numerical method is used als. A typical unit of masonry is selected to serve merical model of RVE is established with detailed to study the strain rate effect on masonry materias a representative volume element （RVE）. Nudistinctive modeling of brick and mortar with their respective dynamic material properties obtained from laboratory tests. The behavior of brick and mortar are characterized by a dynamic damage model that accounts for rate-sensitive and pressuredependent properties of masonry materials. Dynamic loads of different loading rates are applied to RVE. The equivalent homogenized uniaxial compressive strength, threshold strain and elastic modulus in three directions of the masonry are derived from the simulated responses of the RVE. The strain rate effect on the masonry material with clay brick and mortar, such as the dynamic increase factor （DIF） of the ultimate strength and elastic modulus as a function of strain rate are derived from the numerical results.展开更多
The finite element method is used to simulate the rectification process of shield machine, to study the relationship between rectification moment and angle and to explore the influence laws of different soil parameter...The finite element method is used to simulate the rectification process of shield machine, to study the relationship between rectification moment and angle and to explore the influence laws of different soil parameters and buried depth on rectification moment. It is hoped that the reference value of rectification moment can be offered to operator, and theoretical foundation can be laid for future automatic rectification technology. The results show that the rectification moment and angle generally exhibit good linear behavior in clay layers with different soil parameters or buried depths, and then the concept of rectification coefficient, that is, the ratio of rectification angle to rectification moment, is proposed; different soil parameters and buried depths have different influences on rectification coefficient, in which elastic modulus has great influence but others have little influences; the simulations of rectification process are preformed in clay layers with different elastic modulus, and fitting results show that elastic modulus and rectification coefficient present the quadratic function relation.展开更多
The author studies the metric spaces with operator norm localization property. It is proved that the operator norm localization property is coarsely invariant and is preserved under certain infinite union. In the case...The author studies the metric spaces with operator norm localization property. It is proved that the operator norm localization property is coarsely invariant and is preserved under certain infinite union. In the case of finitely generated groups, the operator norm localization property is also preserved under the direct limits.展开更多
The effect of transverse correlation between spins on the thermodynamic properties of ferromagnetic systems is investigated in details. Qualitatively, at finite temperature the transverse correlation reflects the shor...The effect of transverse correlation between spins on the thermodynamic properties of ferromagnetic systems is investigated in details. Qualitatively, at finite temperature the transverse correlation reflects the short-range interaction between spins, so that lowers the internal energy and consequently raises the free energy. It also means the introduction o[ some ordering, and hence lowers the entropy. It is depressed by the field which forces the spins to turn to the field direction, so that it decreases with the field when temperature is fixed. The low-temperature expansion of the energy shows that the inclusion of the transverse correlation at least partly considers the interaction between spin waves.展开更多
基金Projects(2006BA104B04-1,2006BAE04B07-3) supported by the National Science and Technology Supporting Program of ChinaProject (2007KZ05) supported by the Science and Technology Supporting Program of Changchun City, ChinaProject supported by "985 Program" of Jilin University,China
文摘Mg-6Al-0.3Mn-xY(x=0,0.3,0.6 and 0.9,mass fraction,%) magnesium alloys were prepared by casting and hot rolling process.The influence of yttrium on microstructure and tensile mechanical properties of the AM60 magnesium alloy was investigated.The results reveal that with increasing the yttrium content,Al2Y precipitates form and the grain size is reduced.The ultimate strength,yield strength and elongation at room temperature are 192 MPa,62 MPa and 12.6%,respectively,for the as-cast Mg-6Al-0.3Mn-0.9Y alloy.All these properties are improved obviously by hot rolling,and the values are up to 303 MPa,255 MPa and 17.1%,respectively,for the rolled Mg-6Al-0.3Mn-0.9Y alloy.The improvement of mechanical properties is attributed to continuous dynamic recrystallization and the existence of highly thermal stable Al2Y precipitate which impedes the movement of dislocation effectively.
基金Supported by Australia Research Council(No.DP0451966)
文摘In this paper, numerical method is used als. A typical unit of masonry is selected to serve merical model of RVE is established with detailed to study the strain rate effect on masonry materias a representative volume element （RVE）. Nudistinctive modeling of brick and mortar with their respective dynamic material properties obtained from laboratory tests. The behavior of brick and mortar are characterized by a dynamic damage model that accounts for rate-sensitive and pressuredependent properties of masonry materials. Dynamic loads of different loading rates are applied to RVE. The equivalent homogenized uniaxial compressive strength, threshold strain and elastic modulus in three directions of the masonry are derived from the simulated responses of the RVE. The strain rate effect on the masonry material with clay brick and mortar, such as the dynamic increase factor （DIF） of the ultimate strength and elastic modulus as a function of strain rate are derived from the numerical results.
基金Project(2007CB714006)supported by the National Basic Research Program of China
文摘The finite element method is used to simulate the rectification process of shield machine, to study the relationship between rectification moment and angle and to explore the influence laws of different soil parameters and buried depth on rectification moment. It is hoped that the reference value of rectification moment can be offered to operator, and theoretical foundation can be laid for future automatic rectification technology. The results show that the rectification moment and angle generally exhibit good linear behavior in clay layers with different soil parameters or buried depths, and then the concept of rectification coefficient, that is, the ratio of rectification angle to rectification moment, is proposed; different soil parameters and buried depths have different influences on rectification coefficient, in which elastic modulus has great influence but others have little influences; the simulations of rectification process are preformed in clay layers with different elastic modulus, and fitting results show that elastic modulus and rectification coefficient present the quadratic function relation.
基金Project supported by the National Natural Science Foundation of China (No. 10901033)the Shanghai Phosphor Science Foundation (No. 07SG38)+1 种基金the Shanghai Pujiang Program (No. 08PJ14006)the Fundamental Research Funds for the Central Universities
文摘The author studies the metric spaces with operator norm localization property. It is proved that the operator norm localization property is coarsely invariant and is preserved under certain infinite union. In the case of finitely generated groups, the operator norm localization property is also preserved under the direct limits.
基金Supported by the National 973 Project 2012 CB927402the National Natural Science Foundation under Grant Nos.11074145 and 61275028
文摘The effect of transverse correlation between spins on the thermodynamic properties of ferromagnetic systems is investigated in details. Qualitatively, at finite temperature the transverse correlation reflects the short-range interaction between spins, so that lowers the internal energy and consequently raises the free energy. It also means the introduction o[ some ordering, and hence lowers the entropy. It is depressed by the field which forces the spins to turn to the field direction, so that it decreases with the field when temperature is fixed. The low-temperature expansion of the energy shows that the inclusion of the transverse correlation at least partly considers the interaction between spin waves.
