皮革编织工艺与设计

文章分析了当今皮革编织工艺与中国汉晋时期的编织工艺的特点,揭示了古今编织工艺的设计特点差异,反映了在历史文化的发展过程中编织工艺的变化,以及人们对于物质精神追求的改变。

Microstructure evolution and solidification behaviors of A2017 alloy during cooling/stirring and rolling process

A novel semisolid rheo-rolling process of A2017 alloy was achieved by combining the shape rolling mill with the vibrating sloping plate device. The microstructure evolution and solidification behaviors during the process were investigated. The high cooling rate caused by the sloping plate and stirring action caused by the vibration and metal flow lead to a high nucleation rate as well as two primary grain growth patterns, direct globular growth as well as dendrite growth and subsequent breakage, which causes the formation of fine spherical or rosette primary grains. During the rolling process, the grains of the strip were elongated. The primary grain size of A2017 alloy strip increases with the increment of casting temperature. When the casting temperature was between 650 °C and 660 °C, A2017 alloy strip with good quality was produced by the proposed process. The microstructures of the strip are mainly composed of spherical or rosette grains.

春雨之后,我笑了

雨又下了起来,越下越大,是重回大地的春在尽情地宣泄。没有往日的温婉、柔情、羞涩,有的只是与江南大地久别重逢时,凭高酹酒寻欢作乐的喜悦。雨不愿停,风不愿止,斜织于天幕前,织成一层薄烟,笼在树冠上,笼在远处群山前。

Research and Application of the Mathematic Model for the Washing Shrinkage of Woven Fabric

Having analyzed the relationships between washing shrinkage and weaving technique, parameters, material properties of woven fabrics and studied the shrinkage mechanism and its mathematical model of the plain fabric, researchers set up a shrinkage model of the twills and satins and proposed a method for calculating the washing shrinkage based on weaving technique and parameters of fabrics. Shrinkage experiments of silk habotai, silk twill and silk satin fabrics were performed. The results were compared with those of the theoretical computations, and theoretical method is reliable.

Algorithm for Automatic Generation of Curved and Compound Twills

A new arithmetic using matrix left-shift functions for the quicker generation of curved and compound twills is introduced in this paper. A matrix model for the generation of regular, curved and compound twill structures is established and its computing simulation realization are elaborated. Examples of the algorithm applying in the simulation and the automatic generation of curved and compound twills in fabric CAD are obtained.

Influence of plate length and plate cooling rate on solidification and microstructure of A356 alloy produced by oblique plate

A356 alloy melt solidifies partially when it flows down on an oblique plate cooled from bottom by counter flowing water. Columnar dendrites are continuously formed on the plate wall. Because of the forced convection, these dendrites are sheared off into equiaxed/fragmented grains and then washed away continuously by producing semisolid slurry at plate exit. Plate cooling rate provides required extent/amount of solidification whereas plate length enables necessary shear for producing semisolid slurry of desired quality. Slurry obtained is solidified in metal mould to produce semisolid-cast billets of desired microstructure. Furthermore, semisolid-cast billets are also heat-treated to improve surface quality. Microstructures of both semisolid-cast and heat-treated billets are compared. The effects of plate length and plate cooling rate on solidification and microstructure of billets produced by using oblique plate are illustrated. Three different plate lengths（200 mm, 250 mm, 300 mm） associated with three different heat transfer coefficients（1000, 2000 and 2500 W/（m2·K）） are involved. Plate length of 250 mm with heat transfer coefficient of 2000 W/（m2·K） gives fine and globular microstructures and is the optimum as there is absolutely no possibility of sticking of slurry to plate wall.

Microstructure and mechanical properties of Al-Mg_2Si composite fabricated in-situ by vibrating cooling slope

An innovative semisolid technique termed as vibrating cooling slope(VCS)has been applied to producing in-situ Al-25%Mg2Si(mass fraction)composite.The molten Al-16.5Mg-9.4%Si(mass fraction)alloy with 100°C superheat was poured on the surface of an inclined copper plate(set at 45°inclined angle)while it was vibrated at a frequency of 40 Hz and an amplitude of 400μm.After travelling the length of 40 cm on the slope,the resultant semisolid alloy was cast into a steel mold.For the purpose of comparison,reference composite samples were made by gravity casting(GC)and conventionally still cooling slope casting(CS)methods using the same alloy under identical conditions.The samples were hot extruded at 500°C.It was concluded that the size of Mg2Si particles was decreased by about 50%and 70%for the CS and VCS produced samples respectively when compared to that of the GC produced sample.Despite of their higher porosity contents,both the as-cast and hot-extruded VCS processed samples exhibited higher hardness,shear yield stress(SYS)and ultimate shear strength(USS)values as compared with their GC produced counterparts.These results were attributed to the refined and modified microstructure obtained via this newly developed technique.

Classification of wintertime large-scale tilted ridges over the Eurasian continent and their influences on surface air temperature

This study investigates the major patterns of large-scale tilted ridges(LSTRS)over the Eurasian continent and their connections with large-scale surface air temperature during boreal winter.A total number of 134 LSTR events with zonal extent exceeding 90°of longitude on the peak day are identified.Using self-organizing map(SOM),the LSTRs are classified into five clusters that are characterized by different spatial distributions and orientations.The leading two clusters are closely associated with extensive and persistent cold events over different places.Considering the first cluster,LSTRs extend from the Ural Mountains to Northeast Asia and are favorable for the amplification and southeastward extension of the Siberian high.Therefore,this cluster is closely associated with the occurrence of extensive and persistent cold events in china.In comparison with the first cluster,the LSTRs of second group are situated to the west,with starting points from the Kola Peninsula,and cause extensive and persistent cold events over Eastern Europe,central Asia,and central Siberia.The results suggest that the vertical coupling between LSTRs and the corresponding anomalous sea level pressure is crucial for the persistent cold temperature events associated with the leading two SOM clusters.

Comparison of microstructure and wear resistance of A356-SiC_p composites processed via compocasting and vibrating cooling slope

The influences of SiC content on the microstructure, porosity, hardness and wear resistance of A356？SiCp composites processed via two different methods of compocasting and vibrating cooling slope （VCS） were compared with each other. In the as-cast condition, the matrix of VCS and compocast processed composites exhibited globular and dendritric structures, respectively. While a more uniform distribution of SiC particulates in the matrix alloy as well as higher hardness values were obtained for the VCS processed samples, the composites produced via compocasting exhibited less porosity. The increased SiC content （up to 20% in volume fraction） resulted in a more uniform distribution of SiC particles within the matrix alloy and improved wear resistance for both the composite series. However, for the VCS processed composites, the increased SiC content, resulted in the decreased size and shape factor of globules as well as better tribological properties when compared with compocast composites. It was concluded that the improved properties of the VCS processed composites when compared with their compocast counterparts was a consequence of a more uniform distribution of SiC particulates in the matrix alloy as well as the globular microstructure generated during the VCS process.

Effect of tool tilt angle on strength and microstructural characteristics of friction stir welded lap joints of AA2014-T6 aluminum alloy

Friction stir welding(FSW)has been extensively adopted to fabricate aluminium alloy joints by incorporating various welding parameters that include welding speed,rotational speed,diameters of shoulder and pin and tool tilt angle.FSW parameters significantly affect the weld strength.Tool tilt angle is one of the significant process parameters among the weld parameters.The present study focused on the effect of tool tilt angle on strength of friction stir lap welding of AA2014-T6 aluminium alloy.The tool tilt angle was varied between 0°and 4°with an equal increment of 1°.Other process parameters were kept constant.Macrostructure and microstructure analysis,microhardness measurement,scanning electron micrograph,transmission electron micrograph and energy dispersive spectroscopy analysis were performed to evaluate the lap shear strength of friction stir lap welded joint.Results proved that,defect-free weld joint was obtained while using a tool tilt angle of 1°to 3°.However,sound joints were welded using a tool tilt angle of 2°,which had the maximum lap shear strength of 14.42 kN and microhardness of HV 132.The joints welded using tool tilt angles of 1°and 3°yielded inferior lap shear strength due to unbalanced material flow in the weld region during FSW.