断层带土壤气中H_2观测——探索地震短临预报的新途径

本文介绍了氢的化学与地球化学特性及氢气与地震的关系,论证了利用断层带氢气观测突破地震短临预报难关的可能性。氢(H)是粒径最小,质量最轻,迁移速度最快,穿透力最强的元素。氢气(H2)在大气中的含量很低(0.5ppm),在地壳中的含量较高(n^n×102 ppm),集中分布在5~8km深度,主要释放于断层带上。H2动态与断裂活动、地震活动的关系明显,特别是地震前n^n×10天常常表现出信噪比很高的异常,因此学者们一直在探索将断层带H2观测用于地震预报,但由于观测技术的限制进展缓慢。随着ATG-6118H型数字化测氢仪的研制成功,在地震台站连续观测H2有了可能。鉴于上述情况,文中提出了在较大的地震断层带上成网观测断层带土壤气H2的思想,并对网的布设原则与规模、观测点的选择与观测孔建设等技术要求进行了讨论。

Semi-analytical solution for mechanical analysis of tunnels crossing strike-slip fault zone considering nonuniform fault displacement and uncertain fault plane position

The tunnel subjected to strike-slip fault dislocation exhibits severe and catastrophic damage.The existing analysis models frequently assume uniform fault displacement and fixed fault plane position.In contrast,post-earthquake observations indicate that the displacement near the fault zone is typically nonuniform,and the fault plane position is uncertain.In this study,we first established a series of improved governing equations to analyze the mechanical response of tunnels under strike-slip fault dislocation.The proposed methodology incorporated key factors such as nonuniform fault displacement and uncertain fault plane position into the governing equations,thereby significantly enhancing the applicability range and accuracy of the model.In contrast to previous analytical models,the maximum computational error has decreased from 57.1%to 1.1%.Subsequently,we conducted a rigorous validation of the proposed methodology by undertaking a comparative analysis with a 3D finite element numerical model,and the results from both approaches exhibited a high degree of qualitative and quantitative agreement with a maximum error of 9.9%.Finally,the proposed methodology was utilized to perform a parametric analysis to explore the effects of various parameters,such as fault displacement,fault zone width,fault zone strength,the ratio of maximum fault displacement of the hanging wall to the footwall,and fault plane position,on the response of tunnels subjected to strike-slip fault dislocation.The findings indicate a progressive increase in the peak internal forces of the tunnel with the rise in fault displacement and fault zone strength.Conversely,an augmentation in fault zone width is found to contribute to a decrease in the peak internal forces.For example,for a fault zone width of 10 m,the peak values of bending moment,shear force,and axial force are approximately 46.9%,102.4%,and 28.7% higher,respectively,compared to those observed for a fault zone width of 50 m.Furthermore,the position of the peak internal forces is influenced by variations in the ratio of maximum fault displacement of the hanging wall to footwall and the fault plane location,while the peak values of shear force and axial force always align with the fault plane.The maximum peak internal forces are observed when the footwall exclusively bears the entirety of the fault displacement,corresponding to a ratio of 0:1.The peak values of bending moment,shear force,and axial force for the ratio of 0:1 amount to approximately 123.8%,148.6%,and 111.1% of those for the ratio of 0.5:0.5,respectively.

Relationship between the rock mass deformation and places of occurrence of seismological events

Static effort of rock mass very rarely causes of rock burst in polish coal mines. Rock bursts with source in the seismic tremor within the roof rock layers are prevailing. A seismic tremor is an effect of rupture or sliding in roof layers above the exploited panel in coal seam, sometime in a distance from actual exploitation. Sliding, as a rule occurs in fault zone and tremors in it are expected, but monolithic layer rupture is very hard to predict. In a past few years a practice of analyzing state of deformation in high energy seismic tremors zones has been employed. It let gathering experience thanks to witch determination of dangerous shape of reformatted roof is possible. In the paper some typical forms of roof rocks deformations leading to seismic tremor occurrence will be presented. In general these are various types of multidirectional rock layers bending. Real examples of seismic events and rock bursts will be shown.

Stress spatial evolution law and rockburst danger induced by coal mining in fault zone

In order to explore the influence of coal mining disturbance on the rockburst occurring in fault zone, this research constructed a mechanical model for the evolution of fault stress, and analyzed the influence of the ratio of horizontal stress to vertical stress on the stability of fault, and the spatial distribution of the stress in fault zone as well as its evolution rule. Furthermore, the rockburst danger at different spatial areas of fault zone was predicated. Results show that: when both sides of the working face are mined out, the fault zone in the working face presents greater horizontal and vertical stresses at its boundaries but exhibits smaller stresses in its middle section; however, the ratio of horizontal stress to vertical stress is found to be greater at middle section and smaller at boundaries. As the working face advances towards the fault, the horizontal and vertical stresses of the fault firstly increases and then decreases; conversely,the ratio of horizontal stress to vertical stress keeps decreasing all the time. Therefore, if the fault zones are closer to the goaf and the coal wall, the stress ratio will be smaller, and the fault slip will be more prone to occur, therefore rockburst danger will be greater. This research results provide guidance for the rockburst prevention and hazard control of the coal mining in fault zone.

Slip Rate and Strong Earthquake Dislocation along the Moxi-Mianning Segment of the Xianshuihe-Anninghe Fault Zone

The results from interpretation of the aerophotos and in-situ seismogeological researches show that there are some obvious late-Quaternary activities along the Moxi-Mianning segment of the Xianshuihe-Anninghe fault zone, with the characteristics of sinistral-slip movement accompanied by some significant vertical slip components. Since late-Quaternary, the average horizontal slip rate of the segment at the south of Moxi along the Xianshuihe fault is 6.0～9.9mm/a and 4.7～5.3mm/a along the segment at the north of Mianning of the Anninghe fault. The results from the investigation of coseismic dislocation and ground rupture show that the ground rupture caused by 1876 Kangding-Luding earthquake with M 7 3/ 4 can extend to the south of Tianwan. The segment at the north of Mianning of the Anninghe fault has a background for producing M7.5 earthquake and the geological record of the last strong earthquake must be the proofs of the 1327 earthquake with M>6.0 with poor historical records.

Study of Paleoearthquakes by Excavation of Grouped Trenches on the Zemuhe Fault in Daqingliangzi,Xichang,Sichuan

Uncertainties are common in the dating of paleoearthquakes.To improve the credibility of the dating of paleoearthquakes,analysis was done on fault activity,sedimentary environment and seismo-geomorphology to investigate paleoearthquakes along the Zemuhe active fault zone.Grouped trenches were excavated near Daqingliangzi,which revealed three palaeoearthquake events aged 160a,3100a and 5500a～8900a,respectively,including recurrence intervals of about 3000a.Sedimentary processes related to strike-slip fault type earthquakes were discussed,and a sedimentary model was put forward for strike-slip faults at hillsides where drumlin and reverse scarp developed.

STRUCTURAL ORIGIN OF THE FAULTED BROWN COAL BASIN IN YUNNAN, CHINA──The role of strike-sliping in basin formation and inversion of Xianfeng coal basin

Based on the analysises of regional structural setting, basin formation and deformation, this paper demonstrates that the Xianfeng basin has been formed and inverted under the strike-slip regime. The article is a partial result of the whole research.

A Preliminary Study of Palaeo-earthquakes on the Maqu Fault of East Kunlun Fault Zone

The East Kunlun active fault is an important NWW-trending boundary fault on the northeastern margin of the Qinghai-Xizang (Tibet) Plateau. The Maqu fault is the easternmost segment of the East Kunlun active fault. Based on three trenches, four Holocene palaeo-earthquake events are identified along the Maqu fault. The latest palaeo-earthquake event is (1730±50) ～ (1802±52) a BP, the second is (3736±57) ～ (4641±60) a BP, the third is (8590±70) a BP, and the earliest is (12200±1700) ka BP. The time of the first and second palaeo-earthquake events is more reliable than that of the third and last ones. As a result, the recurrence interval of the palaeo-earthquakes on the easternmost segment of the East Kunlun active fault is approximately 2400 a, and the palaeo-earthquake elapsed time is (1730±50) ～ (1802±52) a BP.

Research on Present Activity Characteristics of Heizi Fault and Discussion of Its Relative Problems

Based on other previous researches, we recalculate the micro-displacement along the Heizi fault with recent deformation data of the Heizi reservoir. The result shows that activity characteristics of Heizi fault has changed greatly since 1973 and have experienced four phases. The third phase is characteristics of normal fault, and others characteristic of reverse faults. Constructing the reservoir dam and reservoir sluice has important effect on present activity of the fault, even changed the activity characteristics of faults in some phases. Seismicity has some effect on deformation data and fault activity.

Tectonic Features of the M_S8.0 Wenchuan Earthquake and Its Aftershocks

The M8.0 Wenchuan earthquake occurred on the Longmenshan fault zone. Based on field investigation of the surface rupture and focal mechanism study of the aftershocks, we discuss the geological relationship of the main, secondary and triggered ruptures. The main rupture is about 200km long and can be divided into the south part and the north part. The south part consists of two parallel fault zones characterized by reverse faulting, with several parallel secondary ruptures on the hanging wall of the main fault, and the north part is a single main fault zone characterized by lateral strike-slip and reverse faulting. Compared to a 300km long aftershock distribution, the surface rupture only occupies 200km, and the remaining lOOkm on the northeast of the main rupture was triggered by aftershocks. Study on the ruptures of this earthquake will be useful for studying the earthquake risk evolution on the Longmenshan fault system.

Crust Shortening of the Daliangshan Tectonic Zone in the Cenozoic Era and Its Implications

The Daliangshan tectonic zone is a rhombic area to the east of the Anninghe and Zemuhe fault zones in the middle segment of the Xianshuihe-Xiaojiang fault system along the southeast margin of the Qinghai-Xizang （Tibet） Plateau. Since the Cenozoic era, the neotectonic deformation in the Daliangshan tectonic zone has presented not only sinistral slip and reverse faulting along the Daliangshan fault zone, but also proximate SN-trending crust shortening. It is estimated that the average crust shortening in the Daliangshan tectonic zone is 10.9 ± 1.6 km, with a shortening rate of 17.8 ± 2.2% using the method of balanced cross-sections. The crust shortening from folding occurred mainly in the Miocene and the Pliocene periods, lasting no more than 8.6 Ma. Based on this, a crust shortening velocity of 1.3 ± 0.2 mm/a can be estimated. Compared with the left offset along the Daliangshan fault zone, it is recognized that crust shortening by folding plays an important part in transferring crustal deformation southeastward along the Xianshulhe-Xiaojiang fault system.

Tectonic Background of the Yutian M_S7.3 Earthquake in 2014 and Its Relationship with the Yutian M_S7.3 Earthquake in 2008

The regional tectonic background and characteristics of active faults of the Yutian MS7.3earthquake on February 12,2014 are discussed in this paper.After the analysis of the epicenter area of the MS7.3 earthquake in 2014 and the focal mechanisms of the former strong earthquakes around it,the authors deduced that the seismogenic fault of the MS7.3earthquake is the east branch of the Ashikule fault.The MS7.3 earthquake in 2014 and the MS7.3 earthquake in 2008 are two strong earthquake events on the different sections of the Altun Tagh fault,where the fault behavior changes from sinistral slip to normal faulting because of the extensional tail effects in the southern end of the Altun Tagh fault.It is concluded that the two MS7.3 earthquakes have the same dynamic source,and the MS7.3earthquake in 2008 promoted the occurrence of the MS7.3 earthquake in 2014.Finally,we calculate the Coulomb stress change to the seismogenic fault of the MS7.3 earthquake in2014 from the MS7.3 earthquake in 2008 using the layered crust model.The result also shows that the MS7.3 earthquake in 2008 accelerated the occurrence of the MS7.3earthquake in 2014.

Characteristics of Late Quaternary Activity of the Gadê Segment in the Madoi-Gadê Fault Zone

Madoi-Gade fault is an active fault in the Bayan Har block. According to field investigation, there is an earthquake surface rupture fairly well preserved on the Gade segment of the Madoi-Gade fault zone. The length of the rupture is approximately 50km, with a general strike of NW. The maximum horizontal sinistral displacement is about 7.6m and the maximum vertical displacement is about 4m. A large number of earthquake traces are to be found along the rupture zone, and the phenomena on the surface rupture are also various. Field investigation and analysis on the geological and geomorphological phenomena show that the formation age of the surface rupture is relatively young. A series of linear arranged, triangular facets, fault scarps, fault springs, dislocated gullies, twisted mountain ridges, sag-ponds, dislocated ridges, etc. exist along the fault. Based on the analysis of field investigation and the data available, we believe that the surface rupture is due to a strong earthquake in the history of this area. And it is inferred that the Madoi- Gade fault within the Bayan Har block has been highly active since Late Quaternary and may still be active nowadays.

Prospects and Current Studies on the Fault Zone Seismic Waves

Deep structure and material properties of faults can be understood by observing and simulating the particular phase in a fault fracture zone. This paper reviews the development of fault-zone seismic waves in the seismological domain. The present research status of fault-zone head wave and trapped wave are summarized systematically. Based on recent progress in this field,the paper discusses the prospect on the utilization of seismic wave in fault structure research.

Recent Study of the Changjiang Fault Zone

The Changjiang fault zone,also known as the Mufushan-Jiaoshan fault,is a famous fault located at the southern bank of the Changjiang River,near the Nanjing downtown area.Based on multidisciplinary data from shallow artificial seismic explorations in the target detecting area(Nanjing city and the nearby areas),trenching and drilling explorations,classification of Quaternary strata and chronology dating data,this paper provides the most up-to-date results regarding activities of the Changjiang fault zone,including the most recent active time,activity nature,related active parameters,and their relation to seismic activity.

Late Quaternary Activity of the Central-North Segment of the Taihang Mountains Piedmont Fault Zone

The location and late Quaternary activity of the Central-North Segment of the Taihang Mountains Piedmont fault zone have been studied by shallow seismic survey and combined drill exploration.Our results show that the Baoding-Shijiazhuang fault and the Xushui fault were active in the late Pleistocene,but the south Xushui fault has been inactive since the late Pleistocene.The maximum magnitude of potential earthquake of the faults is 6.0.

The Northern End of the Xiannvshan Fault at the Three Gorges Area

The Xiannvshan fault zone, lying along the western margin of the Huangling anticline, is one of the most important fault zones in the Three Gorges reservoir area. The fault experienced strong activity during the Cenozoic Era. The question of whether the fault zone goes through the Yangtze River has been one of the key problems faced in previous studies as it has a significant influence upon the assessment of geological hazards and earthquake stability in the reservoir area. Based on tectonic and geomorphic observations along the fault zone between the Baixianchi village in Changyang county and Huangkou village in Zigui town, together with the comparisons between the geology in Guizhou and Quyuan town in the north bank of the Yangtze River and the Xiannvshan fault zone, it is suggested that the north end of this fault zone is located around Huangkou village and does not go through the Yangtze rivers northward. The evidence is as follows: ① On the basis of field data collection, it is found that the Xiannvshan Fault zone, which stretches 80km, underwent thrust movement in the Cenozoic period, resulting in ravines and fault scarps, topographically. Whereas, on the northern bank of the Yangtze River, faults are rarely found, and most of the faults are developed in the Jurassic strata,without topographical effects. Therefore, the Xiannvshan Fault zone has not stretched to the north bank of the Yangtze River. ② The fault gouge and tectonite zone were found developed on the Xiannvshan Fault zone at Baixianchi village, but only a tectonite zone was found at Zhouping village. There are also some branch faults close to the northern end of the fault zone. So, the activity of the fault zone weakened from south to north in Cenozoic. The fault zone extends northward and dies out at Huangkou. It doesn't stretch forward any longer as indicated by continuous strata, sparse joints, and small folds, etc.

SEM Numerical Simulation of Vertical and Inclined Fault Zone Trapped Waves and Comparison of Their Wave Fields

Fault zone trapped waves （FZTWs） mainly travel along the fractured fault zone （FZ） which is of low velocity and high attenuation. FZTWs often carry significant information about a fault＇s internal structure, so it is important to understand their wave field characteristics for FZ structure inversion. Most previous simulations are based on vertical faults, while in this paper we implement the FZTW simulations on vertical or inclined faults and compare their wave fields in both time and frequency domains. The results show that the existence of fault zone and inclined angle of fault can significantly influence the features of waves near faults. In amplitude, a fault zone can generate a larger amplitude of waves. The velocity contrast between two wails of fault may lead to amplification of amplitudes in the low velocity fault wall. In frequency, a fault zone tends to influence the waves in the low frequency range. In a pattern of particle polarization of FZTWs, it tends to be single direction for vertical faults but fork to multiple directions for inclined faults, which might provide a new way to study the fault zone with FZTWs. These conclusions may be valuable for FZ structure inversion, and will enhance the knowledge on near-fault strong ground motions.

Study on the Recurrence Probability of Strong Earthquakes of Faults

Based on the physical model of Brownian passage time,the probabilities of recurrence of strong earthquakes on the major active faults in China are calculated in different predictive time spans,based mainly on the analysis of the earthquake preparation process before a strong earthquake occurs. Furthermore,the seismic risks on active faults are studied. The results show that the earthquake probabilities on the Xianshuihe fault,the Altyn Tagh fault,the east Kunlun fault and Xiaojiang fault are significantly greater than other faults in the Chinese mainland,which indicates that the level of stress accumulation on these faults are higher than on other faults. Therefore,these faults may have a seismic risk for strong earthquake in future.

Activity of the Lenglongling fault system and seismotectonics of the 2016 MS6.4 Menyuan earthquake

The MS6.4 Menyuan earthquake occurred on the northern side of the Lenglongling fault(LLLF) in the mid-western of the Qilian-Haiyuan fault zone on January 21, 2016. The earthquake epicenter was distant from the Minle-Damaying and Huangcheng-Shuangta faults, eastern of the Northern Qilian Shan fault zone. A near northwest-striking rupture plane intersects the two faults at a certain angle. The focal mechanism solution shows that this was a thrust-type earthquake, slightly different from the strike-slip movement with a thrust component of the LLLF. Field geological mapping, tectonic geomorphology analysis, trench excavation and 14 C dating reveal that(1) the LLLF has been obviously active since the Holocene, and may behave with characteristic slip behavior and produce M_W7.3–7.5 earthquakes;(2) the LLLF appears as a flower structure in terms of structure style, and dips NNE at a steep angle; and(3) the most recent earthquake event occurred after 1815–1065 a BP. An associated fault, the Northern Lenglongling fault(NLLLF), is located at the northwestern end of the LLLF. Consequently, the NLLLF was continually subject to tectonic pushing effects from the left-lateral shear at the end of the LLLF, and, accordingly, it bent and rotated outward tectonically.Subsequently, the fault deviated from the dominant rupture azimuth and activity weakened. In the late Quaternary, it behaved as a thrust fault with no obvious deformation at the surface. This is indicated by the arc shape, with a micro-protrusion northeastward,and no geologic or geomorphic signs of surface rupturing since the late Quaternary. However, such faults could still rupture at depth, producing moderate-strong earthquakes. The geometric and kinematic properties of the NLLLF are in good agreement with the occurrence and kinematic properties of nodal plane 2, and with the distribution characteristics of the aftershocks and seismic intensity. Therefore, the NLLLF is a more suitable seismogenic structure for the MS 6.4 Menyuan earthquake. In addition, the thrust movement of the NLLLF accommodates subsequent movement of the LLLF. During the historical evolution of the NLLLF,the LLLF and the NLLLF have affected the local topography through tectonic uplift.