期刊文献+
共找到12篇文章
< 1 >
每页显示 20 50 100
美国新海湾大桥上部钢结构的设计及制造 被引量:9
1
作者 马立芬 《世界桥梁》 北大核心 2012年第5期1-6,共6页
美国新海湾大桥是一座单塔自锚式钢悬索桥,钢塔为不对称五边形变截面结构形式,钢箱梁由2个分离的钢箱和联系横梁组成,采用栓焊结构。针对钢塔和钢箱梁的设计特点和制造难点,钢塔采用标准段与塔柱匹配组装、360°旋转翻身、浮吊提升... 美国新海湾大桥是一座单塔自锚式钢悬索桥,钢塔为不对称五边形变截面结构形式,钢箱梁由2个分离的钢箱和联系横梁组成,采用栓焊结构。针对钢塔和钢箱梁的设计特点和制造难点,钢塔采用标准段与塔柱匹配组装、360°旋转翻身、浮吊提升吊装等方案,有效控制了塔柱断面几何精度、焊接变形和焊接质量、立位预拼装的安全和拼装质量;U肋板单元采用门式自动焊接机焊接并辅以双向反变形胎架等措施,保证了焊接熔深等焊缝质量,满足板单元焊后无需校正的要求;U肋板单元焊缝采用相控阵检测方法,解决了U肋焊接接头内部质量失控的难题;钢箱梁采用在车间内连续匹配组装、焊接和预拼装的方案,使箱梁线形和箱口匹配精度满足设计要求。 展开更多
关键词 新海湾大桥 悬索桥 钢箱梁 钢塔 设计 制造技术 运输
下载PDF
美国旧金山-奥克兰新海湾大桥钢结构制造技术 被引量:6
2
作者 丁晓冬 孙伟东 《钢结构》 2008年第11期54-57,共4页
重点从材料、工艺、图纸、模型段和正式产品的制造几方面介绍美国旧金山-奥克兰新海湾大桥钢箱梁及钢塔制造技术,介绍高难度项目的制造要求和技术难点,可为国内钢结构桥梁的设计和制造提供参考。
关键词 旧金山—奥克兰新海湾大桥 钢箱梁 钢塔 制造技术
下载PDF
在加快新旧动能转换,建设新海湾中发挥好作用
3
作者 王凤爱 《化工管理》 2018年第28期7-8,共2页
本文从加快新旧动能转换的角度,立足工作实际,如何做好本职工作出发,建设新海湾中发挥自己应有的作用。
关键词 旧动能转换 新海湾 发挥 作用
下载PDF
美国新海湾大桥钢塔焊接技术和质量管理
4
作者 李涛 付俊 《起重运输机械》 2014年第11期98-103,共6页
美国新海湾大桥钢塔具有单根塔柱结构形式复杂、全部为厚板结构(60~100 mm)、钢塔垂直度要求高(1/2500)及单根吊装节段长且重等特点,制造难度大。针对以上问题,文中从钢塔厚板母材和焊接材料的选用及焊接质量要求、焊接工艺措... 美国新海湾大桥钢塔具有单根塔柱结构形式复杂、全部为厚板结构(60~100 mm)、钢塔垂直度要求高(1/2500)及单根吊装节段长且重等特点,制造难度大。针对以上问题,文中从钢塔厚板母材和焊接材料的选用及焊接质量要求、焊接工艺措施(包括板单元焊接及塔柱翻身焊接)、现场施工技术措施、塔体焊接现场质量管理等方面总结了项目实施过程中获得的经验。采用以上焊接技术及质量管理措施,有效保证了美国新海湾大桥钢塔按时顺利完工验收。 展开更多
关键词 新海湾大桥钢塔 焊接技术 质量管理
下载PDF
我们需要活着的标准:塞泊——美国新海湾大桥建设专家委员会专家、美国工程院院士
5
《交通建设与管理》 2010年第1期44-44,共1页
对于加州政府和百姓来讲,新海湾大桥是加州历史上最大的单体工程项目,其制造过程非常具有挑战性。尽管如此,当大桥建设完成那天,它将会是世界上最漂亮的桥。桥梁技术的进步,特别是桥梁建设技术在抗震区的进步,需要我们在设计理念... 对于加州政府和百姓来讲,新海湾大桥是加州历史上最大的单体工程项目,其制造过程非常具有挑战性。尽管如此,当大桥建设完成那天,它将会是世界上最漂亮的桥。桥梁技术的进步,特别是桥梁建设技术在抗震区的进步,需要我们在设计理念和建设工艺上不断进行创新。 展开更多
关键词 桥梁建设 设计 抗震区 新海湾大桥 美国
下载PDF
美国旧金山新海湾大桥钢塔制作方案
6
作者 赵星 《四川建材》 2020年第5期180-181,183,共3页
美国旧金山新海湾大桥钢塔高148 m,整个钢塔全部为栓焊结构,塔身由4根五边形钢柱和连接横梁组成。其制作难点在于节段重量重、断面大、几何精度要求高、对塔的垂直度要求非常高。本文在介绍旧金山新海湾大桥的基础上,着重解释了钢塔设... 美国旧金山新海湾大桥钢塔高148 m,整个钢塔全部为栓焊结构,塔身由4根五边形钢柱和连接横梁组成。其制作难点在于节段重量重、断面大、几何精度要求高、对塔的垂直度要求非常高。本文在介绍旧金山新海湾大桥的基础上,着重解释了钢塔设计的制作方案及钢塔装配过程中的影响因素。 展开更多
关键词 新海湾大桥 钢塔制作 装配
下载PDF
新鹤海湾的演变特征及水沙模拟分析 被引量:2
7
作者 孙志林 龚玉萌 +3 位作者 许丹 向文罡 罗居元 胡余发 《海洋工程》 CSCD 北大核心 2019年第1期64-74,共11页
为准确把握新鹤海湾的演变特征和水动力条件,采用现场观测和GIS技术对其地形变化、冲淤分布和冲淤量进行探讨,并利用数值模拟分析波浪、潮流和泥沙共同作用对海湾演变的影响。结果表明:海湾演变对连续台风的响应不同,表现为先冲后淤,其... 为准确把握新鹤海湾的演变特征和水动力条件,采用现场观测和GIS技术对其地形变化、冲淤分布和冲淤量进行探讨,并利用数值模拟分析波浪、潮流和泥沙共同作用对海湾演变的影响。结果表明:海湾演变对连续台风的响应不同,表现为先冲后淤,其中苏拉作用下的冲刷量为台风过境后全年的2倍左右;受东南季风的影响,春夏冲淤幅度较大,海湾冲淤分布为南冲北淤,波高分布不均与涨潮流入湾时的向北偏转是其主要原因;波流共同作用下的底床切应力约为潮流单独作用时的10倍,波浪是导致海湾冲刷的主要因素,常浪下底床切应力小于临界冲刷应力,泥沙不易起动,因此海湾冲刷主要是由极端天气时的大浪所导致的。 展开更多
关键词 演变特征 水沙模拟 波浪 潮流 底床切应力 海湾
下载PDF
浅谈美国旧金山新海湾大桥钢塔设计制作方案
8
作者 赵星 孙岑璐 《科学中国人》 2016年第12Z期28-,共1页
1989年10月,里氏7.2级的黑山(Loma Prieta)地震严重损坏了美国旧金山海湾大桥东段结构,部分上不结构坍塌,造成一人死亡,大桥被迫关闭一个月之久,经过修复后继续维持交通至今。旧金山-奥克兰新海湾大桥位于美国旧金山湾,是世界上第一大... 1989年10月,里氏7.2级的黑山(Loma Prieta)地震严重损坏了美国旧金山海湾大桥东段结构,部分上不结构坍塌,造成一人死亡,大桥被迫关闭一个月之久,经过修复后继续维持交通至今。旧金山-奥克兰新海湾大桥位于美国旧金山湾,是世界上第一大单塔自锚悬索钢桥,整个钢塔全部为栓焊结构,塔身由4根五边形钢柱和连接横梁组成,最大板厚达到100mm。其制作难点在于节段重量重、断面大、结构形式复杂、几何精度要求高,对塔的垂直度要求非常高。本文在介绍旧金山新海湾大桥的基础上,着重的解释了钢塔设计的制作方案及钢塔装配过程中的影响因素。 展开更多
关键词 旧金山新海湾大桥 钢塔设计 装配
下载PDF
First report of the genus Lysippe Malmgren, 1866 (Polychaeta:Ampharetidae) from Chinese waters 被引量:3
9
作者 隋吉星 李新正 《Chinese Journal of Oceanology and Limnology》 SCIE CAS CSCD 2013年第4期846-849,共4页
The ampharetid genus Lysippe Malmgren, 1866 is reported for the first time from Chinese waters. The identification was based on material deposited in the Marine Biological Museum of the Chinese Academy of Sciences (Qi... The ampharetid genus Lysippe Malmgren, 1866 is reported for the first time from Chinese waters. The identification was based on material deposited in the Marine Biological Museum of the Chinese Academy of Sciences (Qingdao). A new species, Lysippe trichobranchia sp. nov. is described. The new species is widely distributed in shallow waters of the Bohai Gulf, the Yellow Sea and the East China Sea at depths of 10-40 m. 展开更多
关键词 POLYCHAETA Ampharetidae Lysippe trichobranchia new record new species
下载PDF
A New Record of Ponyfish Deveximentum megalolepis(Perciformes: Leiognathidae) in Beibu Gulf of China 被引量:1
10
作者 JU Yuman SONG Na +3 位作者 CHEN Guobao SUN Dianrong HAN Zhiqiang GAO Tianxiang 《Journal of Ocean University of China》 SCIE CAS CSCD 2017年第3期468-472,共5页
A new record ponyfish, Deveximentum megalolepis Mochizuki and Hayashi, 1989, was documented based on its morphological characteristics and DNA barcode. Fifty specimens were collected from Beibu Gulf of China and ident... A new record ponyfish, Deveximentum megalolepis Mochizuki and Hayashi, 1989, was documented based on its morphological characteristics and DNA barcode. Fifty specimens were collected from Beibu Gulf of China and identified as D. megalolepis by morphological characterization. The coloration, meristic traits, and morphometric measurements were consistent with previously published records. In general, it is a silver-white, laterally compressed and deep bodied ponyfish with 6–9 rows of scales on cheek; scale rows above lateral line 6–8; scale rows below lateral line 14–17. Mitochondrial cytochrome oxidase I subunit(COI) gene fragment was sequenced for phylogenetic analysis. There is no sequence variation of COI gene between the specimens collected in this study. The genetic distances between D. megalolepis and other congeneric species range from 3.6% to 14.0%, which were greater than the threshold for fish species delimitation. The COI sequence analysis also supported the validity of D. megalolepis at genetic level. However, the genetic distance between Chinese and Philippine individuals was about 1.2% and they formed two lineages in gene tree, which may be caused by the geographical distance. 展开更多
关键词 Deveximentum megalolepis Beibu Gulf new record COI sequence
下载PDF
A Numerical Study of Water Circulation in A Thermally Stratified Embayment
11
作者 WANG X. H. WANG X. L 《Journal of Ocean University of Qingdao》 2003年第1期24-34,共11页
Princeton Ocean Model is used to study the response of Jervis Bay, NSW, Australia, to the local wind and remote shelf coastal trapped wave (CTW) forcings in summer seasons when the water column is stratified by the wa... Princeton Ocean Model is used to study the response of Jervis Bay, NSW, Australia, to the local wind and remote shelf coastal trapped wave (CTW) forcings in summer seasons when the water column is stratified by the water temperature.The study has revealed that the response of bay to the wind forcing is the generation of the wind driven currents and the internal Kelvin waves (IKW). However, both temperature and flow sub-inertial oscillations in the bay are weaker than those from the observations and the correlation between the modeled and observed low frequency currents is low. In response to the forcing of CTWs on the adjacent shelf, IKWs are also established in the bay and amplitudes of sub-inertial oscillations of temperature and currents agree better with the observations. It can be concluded that sub-inertial baroclinic flows in the bay is dominantly forced by remote CTW on the shelf adjacent to Jervis Bay during thermally stratified summer seasons. 展开更多
关键词 Princeton Ocean Model water circulation stratified embayment Jervis Bay
下载PDF
Cenozoic structural deformation and expression of the “Tan-Lu Fault Zone” in the West Sag of Liaohe Depression, Bohaiwan basin province, China 被引量:13
12
作者 QI JiaFu LI XiaoGuang +1 位作者 YU FuSheng YU TianCai 《Science China Earth Sciences》 SCIE EI CAS 2013年第10期1707-1721,共15页
Based on the interpretation of 3D seismic data and structural mapping we analyzed the geometry and kinematics of the fault system and validated the expression of the"Tan-Lu Fracture Zone"in the West Sag of L... Based on the interpretation of 3D seismic data and structural mapping we analyzed the geometry and kinematics of the fault system and validated the expression of the"Tan-Lu Fracture Zone"in the West Sag of Liaohe Depression,Bohaiwan basin province.The Cenozoic structural deformation within the West Sag of Liaohe Depression can be divided into extensional structure system and dextral structure system.The extensional system is constituted by numerous NNE-NE trending Paleogene normal faults,where the Taian-Dawa fault(F1)is the master boundary fault(MBF)dominating the deposition during Paleogene so that the sag shows a complex half-graben with"boundary fault in the east and overlap in the west".The dextral system is constituted by 2–3 dextral basement faults in NNE-NE trending(F2,F3,F4)and associated structure,and the time of structural action started in Oligocene and continued to Quarternary so that some associated secondary faults of the dextral system cut off the Neogene and Quaternary.Under the influence of the position and attitude of NNE-NE trending basement strike-slip faults,the central north part and the south part of the West Sag show obviously different structural features.The former appears to be a complex"graben"structure limited by the reversed strike-slip fault in the west and bounded by the inverted normal fault in the east,the latter remains the complex half-graben structure with"boundary fault in the east and overlap in the west",and the graben was mildly reconstructed by one or two normal strike-slip faults.The dextral system within the West Sag is the element of the west branch fault of the Tan-Lu Fracture Zone,which is a deep fracture zone extending along the east of the Liaodongwan Gulf.The deep fracture zone branches off into two separate faults within the Liaohe Depression.The east branch goes through from northern part of the Liaodongwan Gulf to the East Sag of Liaohe Depression and links with the Denghua-Mishan Fault near Shenyang,and the west branch passes from northern part of the Liaodongwan Gulf to the West Sag and Damintun Sag of Liaohe Depression and links with the Yilan-Yitong Fault.The principal displacement zone of the west branch of the Tan-Lu Fracture Zone cuts off the master extensional fault(F1)within the West Sag of Liaohe Depression and induces many cover faults in EW trending within the Neogene and Quaternary. 展开更多
关键词 extensional structure strike-slip structure CENOZOIC Tan-Lu Fracture Zone West Sag of Liaohe Depression
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部