HYBRID MULTI-OBJECTIVE GRADIENT ALGORITHM FOR INVERSE PLANNING OF IMRT

The intelligent optimization of a multi-objective evolutionary algorithm is combined with a gradient algorithm. The hybrid multi-objective gradient algorithm is framed by the real number. Test functions are used to analyze the efficiency of the algorithm. In the simulation case of the water phantom, the algorithm is applied to an inverse planning process of intensity modulated radiation treatment （IMRT）. The objective functions of planning target volume （PTV） and normal tissue （NT） are based on the average dose distribution. The obtained intensity profile shows that the hybrid multi-objective gradient algorithm saves the computational time and has good accuracy, thus meeting the requirements of practical applications.

Joint eigenvalue estimation by balanced simultaneous Schur decomposition

The problem of joint eigenvalue estimation for the non-defective commuting set of matrices A is addressed. A procedure revealing the joint eigenstructure by simultaneous diagonalization of. A with simultaneous Schur decomposition （SSD） and balance procedure alternately is proposed for performance considerations and also for overcoming the convergence difficulties of previous methods based only on simultaneous Schur form and unitary transformations, it is shown that the SSD procedure can be well incorporated with the balancing algorithm in a pingpong manner, i. e., each optimizes a cost function and at the same time serves as an acceleration procedure for the other. Under mild assumptions, the convergence of the two cost functions alternately optimized, i. e., the norm of A and the norm of the left-lower part of A is proved. Numerical experiments are conducted in a multi-dimensional harmonic retrieval application and suggest that the presented method converges considerably faster than the methods based on only unitary transformation for matrices which are not near to normality.

Modeling of Intelligent Integrated Network Management System Using Object Oriented Approach *

The concept of intelligent integrated network management (IINM) is briefly introduced. In order to analyze, design and implement IINM successfully, object oriented approach is testified to be an effective and efficient way. In this paper, object oriented technique is applied to the structural model of IINM system, The Domain object class and the MU object class are used to represent the manager and the managed resources. Especially, NM IA is introduced which is a special object class with intelligent behaviors to manage the resources efficiently.

Shrek:a dynamic object-oriented programming language

From a perspective of theoretical study, there are some faults in the models of the existing object-oriented programming languages. For example, C# does not support metaclasses, the primitive types of Java and C# are not objects, etc. So, this paper designs a programming language, Shrek, which integrates many language features and constructions in a compact and consistent model. The Shrek language is a class-based purely object-oriented language. It has a dynamical strong type system, and adopts a single-inheritance mechanism with Mixin as its complement. It has a consistent class instantiation and inheritance structure, and the ability of intercessive structural computational reflection, which enables it to support safe metaclass programming. It also supports multi-thread programming and automatic garbage collection, and enforces its expressive power by adopting a native method mechanism. The prototype system of the Shrek language is implemented and anticipated design goals are achieved.

Near Crack Line Elastic-Plastic Analysis for an Infinite Plate Loaded by a Pair of Point Shear Forces

The near crack line analysis method was used to investigate a crack loaded by a pair of point shear forces in an infinite plate in an elastic-perfectly plastic solid. The analytical solution was obtained, that is the elastic-plastic fields near crack line and law that the length of the plastic zone along the crack line is varied with external loads. The results are sufficiently precise near the crack line and are not confined by small scale yielding conditions.

Single frame super-resolution reconstruction based on sparse representation

In order to effectively improve the quality of recovered images, a single frame super-resolution reconstruction method based on sparse representation is proposed. The combination method of local orientation estimation-based image patch clustering and principal component analysis is used to obtain a series of geometric dictionaries of different orientations in the dictionary learning process. Subsequently, the dictionary of the nearest orientation is adaptively assigned to each of the input patches that need to be represented in the sparse coding process. Moreover, the consistency of gradients is further incorporated into the basic framework to make more substantial progress in preserving more fine edges and producing sharper results. Two groups of experiments on different types of natural images indicate that the proposed method outperforms some state-of- the-art counterparts in terms of both numerical indicators and visual quality.

Computationally Efficient 2DDOA Estimation for Uniform Planar Arrays:RDROOTMUSIC Algorithm

The problem of two-dimensional direction of arrival(2D-DOA)estimation for uniform planar arrays(UPAs)is investigated by employing the reduced-dimensional(RD)polynomial root finding technique and 2D multiple signal classification(2D-MUSIC)algorithm.Specifically,based on the relationship between the noise subspace and steering vectors,we first construct 2D root polynomial for 2D-DOA estimates and then prove that the 2D polynomial function has infinitely many solutions.In particular,we propose a computationally efficient algorithm,termed RD-ROOT-MUSIC algorithm,to obtain the true solutions corresponding to targets by RD technique,where the 2D root-finding problem is substituted by two one-dimensional(1D)root-finding operations.Finally,accurate 2DDOA estimates can be obtained by a sample pairing approach.In addition,numerical simulation results are given to corroborate the advantages of the proposed algorithm.

Phase Difference Method for DOA Estimation

The phase difference method (PDM) is presented for the direction of arrival (DOA) estimation of the narrowband source. It estimates the DOA by measuring the reciprocal of the phase range of the sensor output spectra at the interest frequency bin. The peak width and variance of the PDM are presented. The PDM can distinguish closely spaced sources with different and unknown center frequencies as long as they are separated with at least one frequency bin. The simulation results show that the PDM has a better resolution than that of the conventional beamforming.

Min-norm spatial spectrum based on acoustic vector-sensor linear array

The high resolution of DOA（direction of arrival） estimation could be obtained by using the min-norm algorithm. In this paper, the expression of the min-norm spatial spectrum based on acoustic vector-sensor（AVS） linear arrays was presented and simulation study was carried out. Results of simulations indicated that left/right ambiguity could be removed and better performance for DOA estimation was obtainable when dealing with sources close to endfire than using pressure hydrophone linear arrays, and the interelement spacing was allowed to exceed the half-wavelength upper limit. A three-element vector hydrophone linear array with two meters interspace was designed. The AVS experiment was carried out at Songhua Lake in Jinlin Province. Experimental results show a high resolution tracking of targets can be obtained using the rain-norm algorithm.

3D finite elements analysis of vertically loaded composite piled raft

In recent years,a new type of foundation named composite piled raft foundation (also called long short composite piled raft) has been developed.Where designing shallow foundations would mean unacceptable settlement,or other environmental risks exist which could impair the structure in the future,composite piled raft foundations could be used.Finite element method was applied to study the behavior of this type of foundation subjected to vertical loading.In order to determine an optimal pile arrangement pattern which yields the minimum settlement,various pile arrangements under different vertical stress levels were investigated.Results show that with increasing the vertical stress on the raft,the effectiveness of the arrangements of short and long piles become more visible.In addition,a new factor named "composite piled raft efficiency" (CPRE) has been defined which determines the efficiency of long short piles arrangement in a composite piled raft foundation.This factor will increase when short piles take more axial stresses and long piles take less axial stresses.In addition,it is found that the changes in settlements for different long short piles arrangement are in a well agreement with changes in values of CPRE ratio.Thus,CPRE ratio can be used as a factor to determine the efficiency of piles arrangements in composite piled raft foundation from the view point of reducing raft settlements.

DOA ESTIMATION FOR WIDEBAND SOURCES BASED ON UCA

A new Direction Of Arrival （DOA） estimation algorithm for wideband sources based on Uniform Circular Array （UCA） is presented via analyzing widcband performance of the general ESPRIT. The algorithm effectively improves the wideband performance of ESPRIT based on the interpolation principium and UCA-ESPRIT. The simulated results by computer demonstrate its efficiency.

Estimating coal reserves using a support vector machine

The basic principles of the Support Vector Machine (SVM) are introduced in this paper. A specific process to establish an SVM prediction model is given. To improve the precision of coal reserve estimation, a support vector machine method, based on statistical learning theory, is put forward. The SVM model was trained and tested by using the existing exploration and exploitation data of Chencun mine of Yima bureau’s as the input data. Then coal reserves within a particular region were calculated. These calculated results and the actual results of the exploration block were compared. The maximum relative error was 10.85%, within the scope of acceptable error limits. The results show that the SVM coal reserve calculation method is reliable. This method is simple, practical and valuable.

AN IMPROVED DOA ESTIMATION ALGORITHM FOR ASYNCHRONOUS MULTIPATH CDMA SYSTEM

This paper proposes an improved Direction Of Arrival（DOA） estimation algorithm for asynchronous multipath Code Division Multiple Access（CDMA） system. The algorithm is based on the correlation matrices of outputs of decorrelator, which is a Multi-User Detection（MUD） approach, one of the key techniques for CDMA system. Through decorrelating processing, the desired user＇s mulipath signals can be resolved and all the other resolved multipath signal interference is eliminated. So the proposed algorithm is expected to perforln much better than algorithm such as that based directly on the Matched Filter（MF） bank outputs. Simulation results confirm this. While the improved algorithm performs better and better as Signal-to-Noise Ratio（SNR） increases, the performance of algorithm based directly on the MF bank outputs can not be improved.

Study on longitudinal wind load calculation method of cables for cable-stayed bridge

Along with the expanding of span of cable-stayed bridge,wind load becomes a more and more important controlling factor for bridge the design.A very large proportion of the wind load acting on cables has exceeded that acting on deck.There was not any detailed prescript in Chinese code for calculation of longitudinal wind load on cables due to lack of theoretical research and experiment,and conservative simplified calculation was adopted during design,which leads to conservative and uneconomical design of structures.To resolve this problem,cable force experiment was carried out during the design of Sutong Bridge.By comparing with international research results,the calculation formula of longitudinal wind drag coefficient for cables was advanced to fill the blank of bridge wind resistant code of China,and has already been adopted in the Highway Bridge Wind Resistant Design Code(JTG/T D60-01-2004)with great significance for bridge engineering.

Two-dimensional DOA estimation based on thin array towed by a small autonomous platform

The small autonomous platform with a thin line array is an important tool for underwater acoustic mobile surveillance.Generally,only one-dimensional(1-D)direction-of-arrival(DOA)of the source signal can be estimated using a thin towed line array.In this work,the two-dimensional(2-D)DOA estimation is achieved by the thin line array towed by a small autonomous platform due to its flexible maneuver.Two perpendicular tow paths are formed through the fast turning of this array.An L-shaped array is formed by the same towed array on these two tow paths at different times.Using the array on these two straight paths,two 1-D DOAs of the source signal are obtained respectively,and then the 2-D DOA based on the formed L-shaped array can be estimated.The effectiveness of proposed approach is verified by numerical simulations and its theoretical error is analyzed.

Blind Joint DOA and Polarization Estimation for Polarization Sensitive Coprime Planar Arrays via a Fast-Convergence Quadrilinear Decomposition Approach

The problem of joint direction of arrival(DOA)and polarization estimation for polarization sensitive coprime planar arrays(PS-CPAs)is investigated,and a fast-convergence quadrilinear decomposition approach is proposed.Specifically,we first decompose the PS-CPA into two sparse polarization sensitive uniform planar subarrays and employ propagator method(PM)to construct the initial steering matrices separately.Then we arrange the received signals into two quadrilinear models so that the potential DOA and polarization estimates can be attained via quadrilinear alternating least square(QALS).Subsequently,we distinguish the true DOA estimates from the approximate intersecting estimations of the two subarrays in view of the coprime feature.Finally,the polarization estimates paired with DOA can be obtained.In contrast to the conventional QALS algorithm,the proposed approach can remarkably reduce the computational complexity without degrading the estimation performance.Simulations demonstrate the superiority of the proposed fast-convergence approach for PS-CPAs.

Stability of mine ventilation system based on multiple regression analysis

In order to overcome the disadvantages of diagonal connection structures that are complex and for which it is difficult to derive the discriminant of the airflow directions of airways, we have applied a multiple regression method to analyze the effect, of changing the rules of mine airflows, on the stability of a mine ventilation system. The amount of air （ Qj ） is determined for the major airway and an optimum regression equation was derived for Qi as a function of the independent variable （ Ri ）, i.e., the venti- lation resistance between different airways. Therefore, corresponding countermeasures are proposed according to the changes in airflows. The calculated results agree very well with our practical situation, indicating that multiple regression analysis is simple, quick and practical and is therefore an effective method to analyze the stability of mine ventilation systems.

SIMPLE AND EFFICIENT SPACE-TIME CHANNEL AND DOA ESTIMATION TECHNIQUES IN TD-SCDMA SYSTEMS

In this paper, a simple method is presented for multi-user space-time channel estimation in Time Division-Synchronized Code Division Multiple Access (TD-SCDMA) systems. The method is based on a spe- cific midamble assignment strategy, which results in a cyclic Toeplitz midamble-matrix in the linear equation of the received data vectors. A Fast Fourier Transform (FFT)-based algorithm is used to obtain the estimate of the uplink multi-user space-time channels. Furthermore, the estimated space-time channel is applied to the identification of multi-paths for each user, and Direction Of Arrival (DOA) estimation for each path is carried out by using the extracted spatial signature vector. Aside from the simplicity in computation, the proposed di- rection of arrival estimation method can effectively resolve multi-paths regardless of the correlation and angle separations of the multi-paths.

Artificial Neural Network Model for Optical Fiber Direction Coupler Design

A new approach to the design of the optical fiber direction coupler by using neural network is proposed. To train the artificial neural network,the coupling length is defined as the input sample, and the coupling ratio is defined as the output sample. Compared with the numerical value calculation of the theoretical formula, the error of the neural network model output is 1% less.Then, through the model, to design a broadband or a single wavelength optical fiber direction coupler becomes easy. The method is proved to be reliable, accurate and time saving. So it is promising in the field of both investigation and application.

A Comparative Study of CART and PTM for Modelling Water Age

CART(Constituent-oriented age and residence time theory) and PTM(Particle-tracking method) are two widely used numerical methods to calculate water age. These two methods are essentially equivalent in theory but their results may be different in practice. The difference of the two methods was evaluated by applying them to calculate water age in an idealized one-dimensional domain. The model results by the two methods are consistent with each other in the case with either spatially uniform flow field or spatially uniform diffusion coefficient. If we allow the spatial variation in horizontal diffusion, a term called pseudo displacement arising from the spatial variation of diffusion coefficient likely plays an important role for the PTM to obtain accurate water age. In particular, if the water particle is released at a place where the diffusion is not the weakest, the water age calculated by the PTM without pseudo displacement is much larger than that by the CART. This suggests that the pseudo displacement cannot be neglected in the PTM to calculate water age in a realistic ocean. As an example, we present its potential importance in the Bohai Sea where the diffusion coefficient varies spatially and greatly.