方导生平及其《方氏家藏集要方》考

《方氏家藏集要方》为南宋方导编著的一部医方书，所收治方多源于经验，具有较重要的临床指导价值。《方氏家藏集要方》原书完帙为两卷，久已散佚。今仅存卷上，且均为抄本或传抄本。然而历代相关文献鲜有记载该书及其编者的情况，很有必要加以梳理考证。

Application of face centred cubic TiB powder as conductive filler for electrically conductive adhesives

Face centred cubic（FCC） TiB ceramic powder synthesized by Ti-boronizing method was used as conductive filler to make ceramic electrically conductive adhesives（ECAs） with the polymer matrix.Electrically conductive properties of the ceramic ECAs were studied.The bulk electrical resistivity varied with the powder content of the FCC-TiB in ECAs.The FCC-TiB filled ECAs also showed the percolation behavior that usually occurred for the metal-filled ECAs,the percolation threshold was located at the content of 60%FCC-TiB.A minimum value of 0.1 Ω·cm was obtained at a content of 75%FCC-TiB.In order to check the reliability of mechanical property,tensile test was done to measure the shear strength,and the shear strength dropped with increasing the content of FCC-TiB powders.It is about 12.26 MPa at the content of 70%TiB powders.The Cu filled ECAs were also prepared for comparison.The properties of the oxidation resistance of the two ECAs were evaluated.The results show that the ceramic ECAs have excellent oxidation resistance and better stability compared with the Cu filled ECAs.

Exploration of regional surface average heat flow from meteorological and geothermal series

We attempt to compute the Surface Average Heat Flow （SAHF） from long-term temperature observations of one hundred seventy-seven observational points at the depths of 0.8, 1.6, and 3.2 m, which were relatively evenly distributed in China's Mainland. We first employ Fourier transformation to remove the influence of atmospheric temperature variations from the observation series, which are classified into the type of the steady-state temperature monotonously increasing with depth （type I） and other three types. Then we compare our results obtained from the data of type I, of which the values are thought to equal to those of the mean borehole heat flow, with those obtained from traditional heat flow observations mainly distributed in North China Craton. In computations of the SAHF at the observation stations, we deduce the thermal diffusivity and volumetric specific heat of the soil by employing harmonic solutions of the heat conduction equation for the same moisture group as the first step, and then we determine the SAHF using Fourier＇s law. Our results indicate that the SAHF derived from shallow earth geothermal data can reflect the heat flow field to a large extent.

COMPACT FOUR-COMPONENT 2-D FDFD METHOD WITH EQUIVALENT SURFACE IMPEDANCE BOUNDARY CONDITION FOR MULTILAYER METAL-COATED WAVEGUIDE

A compact four-component two-dimensional （2-D） finite-difference frequency domain （FDFD） method with the equivalent surface impedance boundary condition is used to analyze the dispersion characteristics of multilayer metal-coated waveguides. According to the equivalent surface impedance boundary condition,the relationship between transverse field components on the boundary can be easily depicted. Once the eigen equation is solved,the propagation constant can be obtained as the eigen value for a given frequency. Results of the proposed method agaree well with those of high frequency structure simulator（HFSS）.

EVOLUTIONARY FUZZY GUIDANCE LAW WITH SELF-ADAPTIVE REGION

Effective guidance is one of the most important tasks to the performance of air-to-air missile. The fuzzy logic controller is able to perform effectively even in situations where the information about the plant is inaccurate and the operating conditions are uncertain. Based on the proportional navigation, the fuzzy logic and the genetic algorithm are combined to develop an evolutionary fuzzy navigation law with self-adapt region for the air-to-air missile guidance. The line of sight (LOS) rate and the closing speed between the missile and the target are inputs of the fuzzy controller. The output of the fuzzy controller is the commanded acceleration. Then a nonlinear function based on the conventional fuzzy logic control is imported to change the region. This nonlinear function can be changed with the input variables. So the dynamic change of the fuzzy variable region is achieved. The guidance law is optimized by the genetic algorithm. Simulation results of air-to-air missile attack using MATLAB show that the method needs less acceleration and shorter flying time, and its realization is simple.[KH*3/4D]

Domain-based noise removal method using fourth-order partial differential equation

Due to the fact that the fourth-order partial differential equation （PDE） for noise removal can provide a good trade-off between noise removal and edge preservation and avoid blocky effects often caused by the second-order PDE, a domain-based fourth-order PDE method for noise removal is proposed. First, the proposed method segments the image domain into two domains, a speckle domain and a non-speckle domain, based on the statistical properties of isolated speckles in the Laplacian domain. Then, depending on the domain type, different conductance coefficients in the proposed fourth-order PDE are adopted. Moreover, the frequency approach is used to determine the optimum iteration stopping time. Compared with the existing fourth-order PDEs, the proposed fourth-order PDE can remove isolated speckles and keeps the edges from being blurred. Experimental results show the effectiveness of the proposed method.

Error Analysis and Compensation of Strapdown Inertial Navigation System

Based on error analysis, the influence of error sources on strapdown inertial navigation systems is discussed. And the maximum permissible component tolerances are established. In order to achieve the desired accuracy (defined by circular error probability), the types of appropriate sensors are chosen. The inertial measurement unit (IMU) is composed of those sensors. It is necessary to calibrate the sensors to obtain their error model coefficients of IMU. After calibration tests, the accuracy is calculated by uniform design method and it is proved that the accuracy of IMU is satisfied for the desired goal.

A New Heat-conduction Logging Technique and its Application

The results of a heat-conduction experiment with a central point source in a sand barrel shows that the temperature of the heat source increase much faster in sand saturated with oil and air （dry sand） than in water sand. During cooling the temperature of the central heat source goes down slower in oil- or air-saturated sands than in water sands. Based on the theory of heat-conduction in porous media and the experimental results, we developed a new heat-conduction logging technique which utilizes an artificial heat source （dynamite charge or electric heater） to heat up target forma- tions in the borehole and then measure the change of temperature at a later time. Post-frac oil production is shown to be directly proportional to the size of the temperature anomaly when other reservoir parameters are fairly consistent. The method is used to evaluate potential oil production for marginal reservoirs in the FY formation in Song-Liao basin of China.

The Finite Element Solutions to the Semiconductor Equations

In this paper, the approximation of stationary equations of the semiconductor devices with mixed boundary conditions is considered. Two schemes are proposed for the system. One is Glerkin discrete scheme, the other is hybrid variable discrete scheme. A convergence analysis is also given.

Novel gravity passive navigation system

According to the characteristics of gravity passive navigation, this paper presents a novel gravity passive navigation system （GPNS）, which consists of the rate azimuth platform （RAP）, gravity sensor, digitally stored gravity maps, depth sensor and relative log. The algorithm of rate azimuth platform inertial navigation system, error state-space equations, measurement equations and GPNS optimal filter are described. In view of the measurements made by an onboard gravity sensor the Eotvos effect is introduced in the gravity measurement equation of a GPNS optimal filter. A GPNS is studied with the Matlab/Simulink tools; simulation results demonstrate that a GPNS has small errors in platform attitude and position. Because the inertial navigation platform is the rate azimuth platform in the GPNS and gravity sensor is mounted on the rate azimuth platform, the cost of the GPNS is lower than existing GPNS＇s and according to the above results the GPNS meets the need to maintain accuracy navigation for underwater vehicles over long intervals.

APPLICATION OF VELOCITY GAIN GUIDANCE TO FAR-DISTANCE RENDEZVOUS

Using impulse hypothesis to solve far-distance rendezvous is difficult to be realized in a real project and the guidance accuracy cannot be controlled. A two-maneuver guidance law is designed for the two-impulse rendezvous problem. The velocity gain guidance is applied to the first maneuver and the time-cut-off law is applied to the second one. Theoretical and simulation results show that the plan is credible. Accuracy requirements in fardistance rendezvous and in transform to close-in rendezous can be met.

Cell Apoptosis Induced by Oligosaccharide in Suspension Cultures of Taxus chinensis

Taxol production of Taxus chinensis (Pilger) Rehd. var. mairei (Lemee et Lévl.) Cheng et L. K. Fu induced by oligosaccharide from Fusarium oxysporum f. vasinfectum (Atkinson) Snyder et Hansen was studied in suspension cultures, and it was found that oligosaccharide triggered cell apoptosis. Under transmission electron microscope the following morphological changes were observed: cell shrinkage, condensation of cytoplasm, nuclear fragmentation, and the increase of high electron density bodies in vacuole in great quantity. In oligosaccharide_treated cells, agarose gel electrophoresis revealed that DNA was digested into oligonucleosomal fragments that were times of 200 bp appearing as DNA ladders. Control cells were in normal physiological state, they were intact, abundant in organelle and with integral nucleus DNA, and the rate of taxol biosynthesis in these cells was very low. After the oligosaccharide to the culture system, the defense system of cells was elicited and the secondary metabolism was strengthened, i.e. phenolics were accumulated in the medium, the activity of polyphenol oxidase (PPO) was increased quickly and secondary wall of cells was thickened. The activity of L _phenylalanine ammonia lyase (PAL), the critical enzyme of the phenylpropanoid pathway, was increased promptly 1 h after elicitation. The rate of taxol production was improved sharply and the maximal taxol concentration at 72 h was six times that of control. Appearance of cell apoptosis was accompanied with the highest concentration of taxol in suspension cultures.

Study on rate azimuth platform inertial navigation system

The cost of the gravity passive inertial navigation system will be lower witha rate azimuth platform and gravity sensor constituting a gravity measurement and navigationsystem. According to the system performance characteristics, we study the rate azimuth platforminertial navigation system (RAPINS), give the system navigation algorithm, error equations of theattitude, velocity and position of the rate azimuth platform, and random error models of theaccelerometer and gyro. Using the MATLAB/Simulink tools, we study the RAPINS and RAPINS withvelocity damping. Simulation results demonstrate that the RAPINS with velocity damping has smallerrors in platform attitude and position and satisfies gravity measurement and navigationrequirement.

On the Azimuth Error of ESG Strapdown North-Seeking Instrument

Because the vector of angular momentum of ESG (electrostatically suspended gyroscope) maintains the fixed direction in inertial space, it may be regarded as a fixed star. The astronavigation aigorithm is used to estimate the azimuth angle and the gyro constant drift in the paper. The relative errors which affect the estimation accuracy of the azimuth angle are the analysed.

Establishment of Reverse-transcription Loopmediated Isothermal Amplification Method for Detection of Wheat Streak Mosaic Virus

A reverse-transcription loop-mediated isothermal amplification （RT-LAMP） method was established for the detection of wheat streak mosaic virus （WSMV）. Ac-cording to the conservative regions of the genes that encode the coat protein of WSMV, 2 pairs of primers were designed. Final y, the 1st pair of primers was select-ed through the specificity test. The sensitivity test showed the sensitivity of RT-LAMP method was 10 times higher than that of RT-PCR. In addition, the amplifica-tion of target gene could be judged visual y from the presence of fluorescence （cal-cein） in the final reaction system. The RT-LAMP method, established in this study, was rapid, easy, specific and sensitive. Moreover, it did not require sophisticated equip-ment. The RT-LAMP was suitable for the rapid detection of WSMV.

Data Analysis and Modeling of Fiber Optic Gyroscope Drift

A data gathering system is designed for the interferometric fiber optic gyroscope (IFOG) of land strapdown inertial system. IFOG is tested and the testing curve is given. The test data of IFOG are analyzed with Allan variance method and each error coefficient is identified. Furthermore, a random drift error model for IFOG is built by the method of time series analysis. The conclusion provides supports for improving IFOG design and compensating for errors of IFOG in practice.

A High-Efficiency Fiber-to-Waveguide Coupler with Low Polarization Dependence Using a Diluted Waveguide in InP Substrate with a 1.55μm Wavelength

We propose a fiber-to-waveguide coupler for side-illuminated p-i-n photodiodes to obtain high responsivity and low polarization dependence that is grown on InP substrate and is suitable for surface hybrid integration in low cost modules. The fiber-to-waveguide coupler is based on a diluted waveguide,which is composed of ten periods of undoped 120nm InP/80nm InGaAsP （1.05μm bandgap） multiple layers. Using the semi-vectorial three dimensional beam propagation method （BPM） with the central difference scheme,the coupling efficiency of fiber-to-waveguide under different conditions is simulated and studied,and the optimized conditions for fiber-to-waveguide coupling are obtained. For TE-like and TM-like modes,the calculated maximum coupling efficiency is higher than 94% and 92% ,respectively. The calculated polarization dependence is less than 0. ldB,showing good polarization independence.

Investigation on transformation process of trip mode choice for planned special events

This paper aims to provide a decision-making method for the transportation management strategies in guiding the transformation of trip mode choice during planned special events. The Expo 2010 Shanghai is taken as an example, and a structural equation model is employed to analyze the dynamic mechanism of trip mode choice behavior and the effectiveness of the transportation management measures at different stages. Based on the difference between the objective-oriented stated preference （SP） survey results and the objectives, together with the feedback from the previous stage survey, some adjustments on the transportation management measures are made in the next stage of the planning process until the objectives are eventually achieved. The results indicate that the adjustments on transportation management measures at different stages can effectively raise the transit share to 88.6%. Nonlocal visitors are inclined to choose nonstop modes of transportation and the companion attributes have the most significant effects on the trip mode choices of visitors. The research method is proved to be an effective way to support the decision making process of transportation management measures during planned special events in the future.

Calibration of Soil Electromagnetic Conductivity in Inverted Salinity Profiles with an Integration Method

Various calibration methods have been propounded to determine profiles of apparent bulk soil electrical conductivity (ECa) and soil electrical conductivity of a saturated soil paste extract (ECe) or a 1:5 soil water extract (EC1:5) using an electromagnetic induction instrument (EM38). The modeled coefficients, one of the successful and classical methods hitherto, were chosen to calibrate the EM38 measurements of the inverted salinity profiles of characteristic coastal saline soils at selected sites of Xincao Farm, Jiangsu Province, China. However, this method required three parameters for each depth layer. An integration approach, based on an exponential decay profile model, was proposed and the model was fitted to all the calibration sites. The obtained model can then be used to predict EC1:5 at a certain depth from electromagnetic measurements made using the EM38 device positioned in horizontal and vertical positions at the soil surface. This exponential decay model predicted the EC1:5 well according to the results of a one-way analysis of variance, and the further comparison indicated that the modeled coefficients appeared to be slightly superior to, but not statistically different from, this exponential decay model. Nevertheless, this exponential decay model was more significant and practical because it depended on less empirical parameters and could be used to perform point predictions of EC1:5 continuously with depth.

Scaling and Removal of Calcium. Carbonate on Electroless Plating Surface

The scaling process of calcium carbonate on a low-energy heat transfer surface－electroless plating surface was investigated in a simulated cooling water system. Owing to the very low surface energy, the electroless plating surface exhibited less scaling susceptibility. A longer induction period and a lower scaling rate were obtained on the low-energy surface compared to copper surface under identical conditions. The calcite particles obtained on the electroless plating surface during the induction period were larger in size than those on copper surface because fewer crystals formed and grew at the same time on the low-energy surface. With increasing surface temperature, the induction period reduced and the scaling rate increased for the low-energy surface. When initial surface temperature was fixed, an increase in fluid velocity would reduce the induction period and increase the scaling rate due to the diffusion effect. However, when the heat flux was fixed, an increase in fluid velocity would decrease the surfacetemperature, and lead to a longer induction period and a lower scaling rate. The removal experiments of calcium carbonate scale indicated that during post induction period, the detachment was not obvious, while during the induction period, apparent removal of crystal particles was obtained on the electroless plating surface owing to the weak adhesion force. The more frequently the transient high hydrodynamic force acted, the more the detached crystal particles were.