Left-hand materials have drawn increasing attention from many disciplines and found widespread application, especially in microwave engineering. A sandwiched metamaterial consisting of multi-nested square-split-ring r...Left-hand materials have drawn increasing attention from many disciplines and found widespread application, especially in microwave engineering. A sandwiched metamaterial consisting of multi-nested square-split-ring resonators on the top side and a set of wires on the back side is proposed. Scattering parameters are retrieved by high-frequency structure simulator(HFSS) software based on the finite element method. Effects of square-split-ring number on the left-hand characteristics containing negative values of permittivity, permeability, and refractive index have been intensively investigated. Simulated results show that obvious resonant left-hand characteristics could be observed within 8-18 GHz, and the resonant frequency counts are inclined to be in direct proportion to the square-split-ring number over 8-18 GHz. Besides, the proposed sandwiched metamaterial with three square-split-ring resonators and three wires presents the widest frequency band of left-hand characteristics in a range of 8-18 GHz. Further, electromagnetic field distributions demonstrated that the induced magnetic dipole dominates the resonant absorption. The multi-peak resonance characteristics of square-split-ring resonant structure are considered to be a promising candidate for selective-frequency absorption or modulation toward microwave frequency band.展开更多
Objective: To investigate the influence of occlusal splint thickness on mandibular movement. Methods: Stabilization occlusal splints of 3, 5 and 7 mm thickness were respectively used during clenching from light contac...Objective: To investigate the influence of occlusal splint thickness on mandibular movement. Methods: Stabilization occlusal splints of 3, 5 and 7 mm thickness were respectively used during clenching from light contact in intercuspal position and the movement of condyles and incisor point were recorded in 5 healthy subjects. Results:The condyles moved anteriorly and superiorly without wearing occlusal splint. When wearing the occlusal splints the condyles displaced anteriorly and inferiorly. The distance of displacement increased gradually with raising the thickness of splint, though the significant difference was just found in right condyle in superior- inferior movement. The condyles went again on a path of anterior and superior direction when subjects clenched from the displaced position. In right condyle the displacement was significantly greater at 7 mm splint than that at 3 mm splint both in anterior-posterior and inferior-superior direction, while in left condyle only in anterior-posterior direction. Meanwhile, the incisal point movement was larger at 7 mm splint than at 3 mm splint in inferior-superior direction. In tapping movement there were no significant differences in condyle movement between the different thickness of occlusal splint. However, the coefficient of variation in total cycle time was the greatest when wearing the splint of 7 mm. Conclusion: Occlusal splint of 7 mm has greater effect than that of 3 mm on condyle movement, but no obvious difference with occlusal splint of 5 mm. When occlusal splint of 7 mm is inserted, the stability of condyle might be influenced during tapping movement.展开更多
The co-evolutionary dynamics of a cyclic game system is investigated in a two-dimensional square lattice with the asymmetrical rates for three species. Different with the well-mixed system, coexistence and extinction ...The co-evolutionary dynamics of a cyclic game system is investigated in a two-dimensional square lattice with the asymmetrical rates for three species. Different with the well-mixed system, coexistence and extinction emerge alternately in the system, where a ＂zero-one＂ behavior is robust for a small population size, whereas, the system is predominated by coexistence for a big population one. We study in detail the influence about the fluctuation to the change of the state, and find that the difference between the maximal amplitude about the fluctuation and the average intensity determines which state the system is ultimately. In addition, we introduce Ports energy to explain the reason of the ＂zero-one＂ behavior. It is shown that the average Ports energy per site is the distance to the ＂zero-one＂ behavior in the model.展开更多
A numerical method for determining a transient fluid temperature is presented.The method is formulated to minimize the total time of heating and cooling operation based on the assumption that maximum tensile and compr...A numerical method for determining a transient fluid temperature is presented.The method is formulated to minimize the total time of heating and cooling operation based on the assumption that maximum tensile and compressive total stresses in a solid can not exceed the allowable value during the entire process.The method can be used for any construction element of a simple or complicated geometry.In this method,material properties of solids can be assumed as constant or temperature dependent.The method will be implemented for the heating operation of an outlet header.This construction element is mounted in supercritical power plants.The outlet header is installed in the 460 MW power unit and it is designed for the working pressure of p_w=26.5 MPa and the steam working temperature of T_w=554℃.The results obtained from the proposed method will be compared with the calculations according to TRD 301-German boiler code.展开更多
In this paper, we extensively studied a mathematical model of biology. It helps us to understand the dynamical procedure of population changes in biological population model and provides valuable predictions. In this ...In this paper, we extensively studied a mathematical model of biology. It helps us to understand the dynamical procedure of population changes in biological population model and provides valuable predictions. In this model, we establish a variety of exact solutions. To study the exact solutions, we used a fractional complex transform to convert the particular partial differential equation of fractional order into corresponding partial differential equation and modified exp-function method is implemented to investigate the nonlinear equation. Graphical demonstrations along with the numerical data reinforce the efficacy of the used procedure. The specified idea is very effective, unfailing, well-organized and pragmatic for fractional PDEs and could be protracted to further physical happenings.展开更多
基金Project(2017YFA0204600)supported by the National Key Research and Development Program of ChinaProject(51802352)supported by the National Natural Science Foundation of ChinaProject(2019JJ50768)supported by the Natural Science Foundation of Hunan Province of China。
文摘Left-hand materials have drawn increasing attention from many disciplines and found widespread application, especially in microwave engineering. A sandwiched metamaterial consisting of multi-nested square-split-ring resonators on the top side and a set of wires on the back side is proposed. Scattering parameters are retrieved by high-frequency structure simulator(HFSS) software based on the finite element method. Effects of square-split-ring number on the left-hand characteristics containing negative values of permittivity, permeability, and refractive index have been intensively investigated. Simulated results show that obvious resonant left-hand characteristics could be observed within 8-18 GHz, and the resonant frequency counts are inclined to be in direct proportion to the square-split-ring number over 8-18 GHz. Besides, the proposed sandwiched metamaterial with three square-split-ring resonators and three wires presents the widest frequency band of left-hand characteristics in a range of 8-18 GHz. Further, electromagnetic field distributions demonstrated that the induced magnetic dipole dominates the resonant absorption. The multi-peak resonance characteristics of square-split-ring resonant structure are considered to be a promising candidate for selective-frequency absorption or modulation toward microwave frequency band.
文摘Objective: To investigate the influence of occlusal splint thickness on mandibular movement. Methods: Stabilization occlusal splints of 3, 5 and 7 mm thickness were respectively used during clenching from light contact in intercuspal position and the movement of condyles and incisor point were recorded in 5 healthy subjects. Results:The condyles moved anteriorly and superiorly without wearing occlusal splint. When wearing the occlusal splints the condyles displaced anteriorly and inferiorly. The distance of displacement increased gradually with raising the thickness of splint, though the significant difference was just found in right condyle in superior- inferior movement. The condyles went again on a path of anterior and superior direction when subjects clenched from the displaced position. In right condyle the displacement was significantly greater at 7 mm splint than that at 3 mm splint both in anterior-posterior and inferior-superior direction, while in left condyle only in anterior-posterior direction. Meanwhile, the incisal point movement was larger at 7 mm splint than at 3 mm splint in inferior-superior direction. In tapping movement there were no significant differences in condyle movement between the different thickness of occlusal splint. However, the coefficient of variation in total cycle time was the greatest when wearing the splint of 7 mm. Conclusion: Occlusal splint of 7 mm has greater effect than that of 3 mm on condyle movement, but no obvious difference with occlusal splint of 5 mm. When occlusal splint of 7 mm is inserted, the stability of condyle might be influenced during tapping movement.
基金Supported by Natural Science Foundation of China under Grant No.10974146the Zhejiang Natural Science Foundation of China under Grant No.Y6090222the Wenzhou Science & Technology Bureau under Grant No.R20080059
文摘The co-evolutionary dynamics of a cyclic game system is investigated in a two-dimensional square lattice with the asymmetrical rates for three species. Different with the well-mixed system, coexistence and extinction emerge alternately in the system, where a ＂zero-one＂ behavior is robust for a small population size, whereas, the system is predominated by coexistence for a big population one. We study in detail the influence about the fluctuation to the change of the state, and find that the difference between the maximal amplitude about the fluctuation and the average intensity determines which state the system is ultimately. In addition, we introduce Ports energy to explain the reason of the ＂zero-one＂ behavior. It is shown that the average Ports energy per site is the distance to the ＂zero-one＂ behavior in the model.
文摘A numerical method for determining a transient fluid temperature is presented.The method is formulated to minimize the total time of heating and cooling operation based on the assumption that maximum tensile and compressive total stresses in a solid can not exceed the allowable value during the entire process.The method can be used for any construction element of a simple or complicated geometry.In this method,material properties of solids can be assumed as constant or temperature dependent.The method will be implemented for the heating operation of an outlet header.This construction element is mounted in supercritical power plants.The outlet header is installed in the 460 MW power unit and it is designed for the working pressure of p_w=26.5 MPa and the steam working temperature of T_w=554℃.The results obtained from the proposed method will be compared with the calculations according to TRD 301-German boiler code.
文摘In this paper, we extensively studied a mathematical model of biology. It helps us to understand the dynamical procedure of population changes in biological population model and provides valuable predictions. In this model, we establish a variety of exact solutions. To study the exact solutions, we used a fractional complex transform to convert the particular partial differential equation of fractional order into corresponding partial differential equation and modified exp-function method is implemented to investigate the nonlinear equation. Graphical demonstrations along with the numerical data reinforce the efficacy of the used procedure. The specified idea is very effective, unfailing, well-organized and pragmatic for fractional PDEs and could be protracted to further physical happenings.
