期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
双刀矿山切割机开挖大型岩石基坑施工技术探讨 被引量:1
1
作者 黄杰龙 《福建建筑》 2015年第1期78-79,100,共3页
本文通过工程实例,从操作要点、质量控制、安全措施等方面探讨利用双刀矿山切割机进行岩石基坑开挖的新工艺,解决爆破作业开挖岩石基坑存在的安全隐患和环境污染等问题;即使用双刀矿山切割机对岩质基础进行分段、分层切割,并解决岩石开... 本文通过工程实例,从操作要点、质量控制、安全措施等方面探讨利用双刀矿山切割机进行岩石基坑开挖的新工艺,解决爆破作业开挖岩石基坑存在的安全隐患和环境污染等问题;即使用双刀矿山切割机对岩质基础进行分段、分层切割,并解决岩石开挖、方料成形、岩石方料起吊等难题,以有效降低工人的劳动强度,提高岩石的利用率。 展开更多
关键词 双刀矿山切割机 岩石 基坑开挖 方料成形 利用率
下载PDF
Mechanism of anti-arterial thrombosis of Dahuangzhecong Fang screened by Ti-Al intermetallic compound porous material 被引量:2
2
作者 万玲 王战义 +6 位作者 魏星 李佶阳 钟广伟 段晓鹏 贺福元 江垚 王东生 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2012年第12期3156-3160,共5页
The mechanism of antithrombotic of Dahuangzhechong Fang separated and purified by Ti-Al intermetallic compound porous material (TAICPM) was researched. Dahuangzhechong Fang, which was isolated and screened by TAICPM, ... The mechanism of antithrombotic of Dahuangzhechong Fang separated and purified by Ti-Al intermetallic compound porous material (TAICPM) was researched. Dahuangzhechong Fang, which was isolated and screened by TAICPM, was used to oral rats. At the end of study, their blood and thrombus were collected. The results show that TAICPM with the pore size of 1-5 μm can screen Dahuangzhechong Fang well. Dahuangzhechong Fang can increase 6-keto-PGF1α, lower content of TXD2 and platelet. Dahuangzhechong Fang has good effect to resist arterial thrombosis. 展开更多
关键词 Ti-Al intermetallic compound porous materials Dahuangzhecong Fang arterial thrombosis isolated Chinese medicine
下载PDF
Creating Technology and Numerical Analysis of Warm Plastic Forming for Non-symmetrical Axostyle
3
作者 徐新成 沈永刚 《Journal of Donghua University(English Edition)》 EI CAS 2010年第4期584-588,共5页
A creating technology of the part forming was discussed and finite volume method(FVM)was used to simulate the forming process of the non-symmetrical axostyle spring core-bar.The results show that the no-even radial fl... A creating technology of the part forming was discussed and finite volume method(FVM)was used to simulate the forming process of the non-symmetrical axostyle spring core-bar.The results show that the no-even radial flange on the top part of the eccentric peachy surface can remarkably block the metal flow and the eccentric peachy can be filled contentedly.Increasing the radius of punch near the inner pocket,the head bulge also can be filled contentedly.The temperature distribution in the part and the forming force,which helps to decide the forming temperature and to select the equipment,was also analyzed.The comparison between the simulation and the experiment result shows that they are accordant. 展开更多
关键词 warm plastic forming finite volume method(FVM) non-symmetrical axostyle
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部