A newnumerical method based on vector form intrinsic finite element（VFIFE） is proposed to simulate the integral lifting process of steel structures. First, in order to verify the validity of the VFIFE method, taking...A newnumerical method based on vector form intrinsic finite element（VFIFE） is proposed to simulate the integral lifting process of steel structures. First, in order to verify the validity of the VFIFE method, taking the steel gallery between the integrated building and the attached building of Nanjing M obile Communication Buildings for example, the static analysis was carried out and the corresponding results were compared with the results achieved by the traditional finite element method. Then, according to the characteristics of dynamic construction of steel structure integral lifting, the tension cable element was employed to simulate the behavior of dynamic construction. The VFIFE method avoids the iterative solution of the stiffness matrix and the singularity problems. Therefore, it is simple to simulate the complete process of steel structure lifting construction.Finally, by using the VFIFE, the displacement and internal force time history curves of the steel structures under different lifting speeds are obtained. The results show that the lifting speed has influence on the lifting force, the internal force, and the displacement of the structure. In the case of normal lifting speed, the dynamic magnification factor of 1. 5 is safe and reasonable for practical application.展开更多
[Objective] This study was conducted to discuss influence factors for safety full heading of machine-transplanted rice seedlings in cool-warm rice area. [Method] Effects of variety, seedling age and nitrogen fertilize...[Objective] This study was conducted to discuss influence factors for safety full heading of machine-transplanted rice seedlings in cool-warm rice area. [Method] Effects of variety, seedling age and nitrogen fertilizer dosage and strategy of machine-transplanted seedlings on safety full heading of machine-transplanted seedlings were investigated. [Result] During mechanized rice production in coolwarm rice area, mid-early-maturing cold-resistant varieties with growth periods no longer than 180 d could selected, and seedling age could controlled within 30-35 d; and the total amount of pure nitrogen should be less than 300 kg/hm^2, and the proportion of nitrogen fertilizer applied in later stages should be properly reduced. [Conclusion] Under this condition, safety full heading of rice is ensured, and the target yield is realized.展开更多
In order to solve the problem that dry-land foxtail millet production completely relies on rainwater with low instable yield and tedious cultivation, Millet Research Institute of Hebei Academy of Agriculture and Fores...In order to solve the problem that dry-land foxtail millet production completely relies on rainwater with low instable yield and tedious cultivation, Millet Research Institute of Hebei Academy of Agriculture and Forestry Sciences integrated a light simplified production technique integrating film mulching, hole sowing and fertilization with mechanized production, forming the light simplified foxtail millet production technique adopting film mulching and hole sowing. This study introduced the light simplified foxtail millet production technique adopting film mulching and hole sowing, including main links such as preparation before sowing, sowing, attached agricultural machines, field management, harvest and residual film recovery.展开更多
The earth-rockfill dam is one of the primary dam types in the selection of high dams to be constructed in Western China, since it is characterized by favorable adaptability of the dam foundation; full utilization of l...The earth-rockfill dam is one of the primary dam types in the selection of high dams to be constructed in Western China, since it is characterized by favorable adaptability of the dam foundation; full utilization of local earth, rock, and building-excavated materials; low construction cost; and low cement consumption. Many major technical issues regarding earth-rockfill dams with a height of over 250 m were studied and solved successfully in the construction of the 261.5 m Nuozhadu earth core rockfill dam. This paper describes research achievements and basic conclusions; systematically summarizes the accumulated experiences from the construction of the Nuozhadu Dam and other high earth-rockfill dams; and discusses major technical issues, such as deformation control, seepage control, dam slope stability, safety and control of flood discharging, safety and quality control of dam construction, safety assessments, early warning, and other key technical difficulties. This study also provides a reference and technological support for the future construction of 300 m high earth-rockfill dams.展开更多
The buildings construction safety problems contain various safety-hidden dangers that caused by the human unsafe behaviors, the substance unsafe conditions, operation environment unsafe factors and management defects....The buildings construction safety problems contain various safety-hidden dangers that caused by the human unsafe behaviors, the substance unsafe conditions, operation environment unsafe factors and management defects. The authors summarize comprehensively the problems of buildings construetion safety in China at present based on grasping the whole safety status of buildings construction, and the synthetic countermeasures including the systems about laws, management, technology and education civilization for buildings construction safety management are brought up based on the viewpoint of safety system theory. Then it is thought that huilding scientific management mechanisms and popularizing effective management methods and measures are the fundamental ways for improving further the level of safety management for buildings construction in China at present.展开更多
We introduce a protocol for QKD based on reusable entangled states. In this protocol, the EPR pairs act as a quantum key to encode and decode information particles. And only an information particle travels between the...We introduce a protocol for QKD based on reusable entangled states. In this protocol, the EPR pairs act as a quantum key to encode and decode information particles. And only an information particle travels between the legitimated users. This improves the security and efficiency of communication. In addition, we show that its extension to a new QSS protocol is also secure and efficient.展开更多
The fact that the security facilities within a system are closely coupled and the security facilities between systems are unconnected results in an isolated protection structure for systems, and gives rise to a seriou...The fact that the security facilities within a system are closely coupled and the security facilities between systems are unconnected results in an isolated protection structure for systems, and gives rise to a serious challenge to system security integrations and system controls. Also, the need for diversified services and flexible extensions of network security asks for more considerations and contribu?tions from the perspective of software engineering in the process of designing and constructing security systems. Based on the essence of the virtualization technique and the idea of software-defined networks, we in this paper propose a novel software-defi ned security architecture for systems. By abstracting the traditional security facilities and techniques, the proposed security architecture provides a new, simple, effective, and programmable framework in which security operations and security controls can be decoupled, and thereby reduces the software module sizes, decreases the intensity of software deve?lopments, and improves the security extensibility of systems.展开更多
Ubiquitous computing systems typically have lots of security problems in the area of identification supply by means of classical Public Key Infrastructure （PKI） methods. The limited computing resources, the disconne...Ubiquitous computing systems typically have lots of security problems in the area of identification supply by means of classical Public Key Infrastructure （PKI） methods. The limited computing resources, the disconnection network, the classification requirements of identification, the requirement of trust transfer and cross identification, the bidirectional identification, the security delegation and the privacy protection etc are all these unsolved problems. In this paper, UCIMssp, a new novel ubiquitous computing identification mechanism based on SPKI/SDSI and Peer-to-Peer （P2P） is presented. SPKI- based authorization is exploited in UCIMssp to solve the above problems in the smalbscale ubiquitous computing environment. The DHT and flooding technology of P2P overlay network over the Intemet is expanded to solve the routing search in the large-scale ubiquitous computing environment. The architecture of ubiquitous computing environment, the validation of identification requisition, the identification authorization processes and the identification supply processes etc of UCIMssp are described in the paper. The performance analysis shows that UCIMssp is a suitable security solution used in the large-scale ubiquitous computing environment.展开更多
Based on cooperative theories and analysis of characters of safety and production in coal mines, discussed the relationship and function of cooperative development between safety and production and established a basic...Based on cooperative theories and analysis of characters of safety and production in coal mines, discussed the relationship and function of cooperative development between safety and production and established a basic cooperative development model. At the same time, a systemic expatiation of the basic principle, the core conception and the contents of the model was given. In the end, the guarantee measures for realization were proposed. The result of the research may have some leading meaning to ensure safety and production in coal enterprises and to achieve synchronous exaltation of production efficiency and the safety degree.展开更多
Large leisure activities usually use large sport facilities. There is often no serious problem with people gathering, but both incomplete facilities and negligence of people security manage may court injury or death. ...Large leisure activities usually use large sport facilities. There is often no serious problem with people gathering, but both incomplete facilities and negligence of people security manage may court injury or death. The purpose of this study is to analyze crowded nodes and to improve evacuation path use Simulex models. The fastest and safest way to achieve safe egress was then well planned. For turn locations, it was found that fixing the plane angle did not significantly raise the overall exiting efficiency. However, replacing the right angle or other angles with arc angle makes overall exiting moving line more fluent. For multito single-directional converging T-junction intersections, modification of turn angle increased the movement fluency, with the higher the modified angle, the higher in fluency. However, changing to round angle did not have as significant effect as expected while gate opening width must be increased to 1.0 m before more significant effects were produced. The results showed that modifying turn angles to 60° produces better improvements.展开更多
基金The National Natural Science Foundation of China(No.51308105)
文摘A newnumerical method based on vector form intrinsic finite element（VFIFE） is proposed to simulate the integral lifting process of steel structures. First, in order to verify the validity of the VFIFE method, taking the steel gallery between the integrated building and the attached building of Nanjing M obile Communication Buildings for example, the static analysis was carried out and the corresponding results were compared with the results achieved by the traditional finite element method. Then, according to the characteristics of dynamic construction of steel structure integral lifting, the tension cable element was employed to simulate the behavior of dynamic construction. The VFIFE method avoids the iterative solution of the stiffness matrix and the singularity problems. Therefore, it is simple to simulate the complete process of steel structure lifting construction.Finally, by using the VFIFE, the displacement and internal force time history curves of the steel structures under different lifting speeds are obtained. The results show that the lifting speed has influence on the lifting force, the internal force, and the displacement of the structure. In the case of normal lifting speed, the dynamic magnification factor of 1. 5 is safe and reasonable for practical application.
文摘[Objective] This study was conducted to discuss influence factors for safety full heading of machine-transplanted rice seedlings in cool-warm rice area. [Method] Effects of variety, seedling age and nitrogen fertilizer dosage and strategy of machine-transplanted seedlings on safety full heading of machine-transplanted seedlings were investigated. [Result] During mechanized rice production in coolwarm rice area, mid-early-maturing cold-resistant varieties with growth periods no longer than 180 d could selected, and seedling age could controlled within 30-35 d; and the total amount of pure nitrogen should be less than 300 kg/hm^2, and the proportion of nitrogen fertilizer applied in later stages should be properly reduced. [Conclusion] Under this condition, safety full heading of rice is ensured, and the target yield is realized.
基金Supported by the National Key Technology Research and Development Program(2014BAD07B01-02)Science and Technology Demonstration Project of Bohai Granary in Hebei ProvinceSpecial Fund of Agro-scientific Research in Public Interest(201303133-1-6)~~
文摘In order to solve the problem that dry-land foxtail millet production completely relies on rainwater with low instable yield and tedious cultivation, Millet Research Institute of Hebei Academy of Agriculture and Forestry Sciences integrated a light simplified production technique integrating film mulching, hole sowing and fertilization with mechanized production, forming the light simplified foxtail millet production technique adopting film mulching and hole sowing. This study introduced the light simplified foxtail millet production technique adopting film mulching and hole sowing, including main links such as preparation before sowing, sowing, attached agricultural machines, field management, harvest and residual film recovery.
文摘The earth-rockfill dam is one of the primary dam types in the selection of high dams to be constructed in Western China, since it is characterized by favorable adaptability of the dam foundation; full utilization of local earth, rock, and building-excavated materials; low construction cost; and low cement consumption. Many major technical issues regarding earth-rockfill dams with a height of over 250 m were studied and solved successfully in the construction of the 261.5 m Nuozhadu earth core rockfill dam. This paper describes research achievements and basic conclusions; systematically summarizes the accumulated experiences from the construction of the Nuozhadu Dam and other high earth-rockfill dams; and discusses major technical issues, such as deformation control, seepage control, dam slope stability, safety and control of flood discharging, safety and quality control of dam construction, safety assessments, early warning, and other key technical difficulties. This study also provides a reference and technological support for the future construction of 300 m high earth-rockfill dams.
基金A Project Supported by Scientific Research Fund of Hunan Provincial Education Department(06C309)
文摘The buildings construction safety problems contain various safety-hidden dangers that caused by the human unsafe behaviors, the substance unsafe conditions, operation environment unsafe factors and management defects. The authors summarize comprehensively the problems of buildings construetion safety in China at present based on grasping the whole safety status of buildings construction, and the synthetic countermeasures including the systems about laws, management, technology and education civilization for buildings construction safety management are brought up based on the viewpoint of safety system theory. Then it is thought that huilding scientific management mechanisms and popularizing effective management methods and measures are the fundamental ways for improving further the level of safety management for buildings construction in China at present.
基金supported by National Natural Science Foundation of China under Crant No.10575017
文摘We introduce a protocol for QKD based on reusable entangled states. In this protocol, the EPR pairs act as a quantum key to encode and decode information particles. And only an information particle travels between the legitimated users. This improves the security and efficiency of communication. In addition, we show that its extension to a new QSS protocol is also secure and efficient.
基金supported in part by the following grants:National Science Foundation of China(Grant No.61272400)Chongqing Innovative Team Fund for College Development Project(Grant No.KJTD201310)+3 种基金Chongqing Youth Innovative Talent Project(Grant No.cstc2013kjrc-qnrc40004)Science and Technology Research Program of the Chongqing Municipal Education Committee(Grant No.KJ1500425)Foundation of CQUPT(Grant No.WF201403)Chongqing Graduate Research and Innovation Project(Grant No.CYS14146)
文摘The fact that the security facilities within a system are closely coupled and the security facilities between systems are unconnected results in an isolated protection structure for systems, and gives rise to a serious challenge to system security integrations and system controls. Also, the need for diversified services and flexible extensions of network security asks for more considerations and contribu?tions from the perspective of software engineering in the process of designing and constructing security systems. Based on the essence of the virtualization technique and the idea of software-defined networks, we in this paper propose a novel software-defi ned security architecture for systems. By abstracting the traditional security facilities and techniques, the proposed security architecture provides a new, simple, effective, and programmable framework in which security operations and security controls can be decoupled, and thereby reduces the software module sizes, decreases the intensity of software deve?lopments, and improves the security extensibility of systems.
基金Supported by the Ministry of Educationin China(No.104086)
文摘Ubiquitous computing systems typically have lots of security problems in the area of identification supply by means of classical Public Key Infrastructure （PKI） methods. The limited computing resources, the disconnection network, the classification requirements of identification, the requirement of trust transfer and cross identification, the bidirectional identification, the security delegation and the privacy protection etc are all these unsolved problems. In this paper, UCIMssp, a new novel ubiquitous computing identification mechanism based on SPKI/SDSI and Peer-to-Peer （P2P） is presented. SPKI- based authorization is exploited in UCIMssp to solve the above problems in the smalbscale ubiquitous computing environment. The DHT and flooding technology of P2P overlay network over the Intemet is expanded to solve the routing search in the large-scale ubiquitous computing environment. The architecture of ubiquitous computing environment, the validation of identification requisition, the identification authorization processes and the identification supply processes etc of UCIMssp are described in the paper. The performance analysis shows that UCIMssp is a suitable security solution used in the large-scale ubiquitous computing environment.
文摘Based on cooperative theories and analysis of characters of safety and production in coal mines, discussed the relationship and function of cooperative development between safety and production and established a basic cooperative development model. At the same time, a systemic expatiation of the basic principle, the core conception and the contents of the model was given. In the end, the guarantee measures for realization were proposed. The result of the research may have some leading meaning to ensure safety and production in coal enterprises and to achieve synchronous exaltation of production efficiency and the safety degree.
文摘Large leisure activities usually use large sport facilities. There is often no serious problem with people gathering, but both incomplete facilities and negligence of people security manage may court injury or death. The purpose of this study is to analyze crowded nodes and to improve evacuation path use Simulex models. The fastest and safest way to achieve safe egress was then well planned. For turn locations, it was found that fixing the plane angle did not significantly raise the overall exiting efficiency. However, replacing the right angle or other angles with arc angle makes overall exiting moving line more fluent. For multito single-directional converging T-junction intersections, modification of turn angle increased the movement fluency, with the higher the modified angle, the higher in fluency. However, changing to round angle did not have as significant effect as expected while gate opening width must be increased to 1.0 m before more significant effects were produced. The results showed that modifying turn angles to 60° produces better improvements.
