期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
无体模QCT与DXA测量腰椎骨密度的对比研究
1
作者 武扬平 《中文科技期刊数据库(引文版)医药卫生》 2023年第10期56-59,共4页
对比无体模QCT与DXA在腰椎骨密度测量中的应用效果。方法 研究时间在2020年1月~2023年1月之间,抽取41例因腰腿痛到我院就诊的患者作为观察对象,均进行无体模QCT、DXA检测,比较检测结果。结果 ①男性、女性、总例数患者无体模QCT和DXA骨... 对比无体模QCT与DXA在腰椎骨密度测量中的应用效果。方法 研究时间在2020年1月~2023年1月之间,抽取41例因腰腿痛到我院就诊的患者作为观察对象,均进行无体模QCT、DXA检测,比较检测结果。结果 ①男性、女性、总例数患者无体模QCT和DXA骨密度测量结果均高度相关,数据差异明显(P<0.05)。②相较于DXA检测方法,无体模QCT检测骨量正常、骨量减少、骨质疏松准确率更高(P<0.05)。③伴随着年龄增加,骨量减少及骨质疏松发生率越来越高,差异明显(P<0.05)。结论 无体模QCT测量腰椎骨密度的应用价值比较高,为骨质疏松诊治提供了参考依据,伴随着年龄增加,骨质疏松发生率越来越高,因此需要格外注意。 展开更多
关键词 无体模QCT DXA 腰椎骨密度
下载PDF
无体模定量CT在椎体压缩骨折保守治疗中的应用研究
2
作者 张望 孙芳娟 +1 位作者 武忠娇 吴家文 《中文科技期刊数据库(全文版)医药卫生》 2023年第9期5-8,共4页
本研究应用无体模定量CT测量椎体压缩骨折患者保守治疗前后骨密度的应用。方法 选择2021年1月至2022年6月深圳龙华区中心医院接诊的50例适合保守治疗的椎体压缩骨折患者,连续治疗 6 个月。分别于治疗前、治疗后6 个月后,应用无体模定量C... 本研究应用无体模定量CT测量椎体压缩骨折患者保守治疗前后骨密度的应用。方法 选择2021年1月至2022年6月深圳龙华区中心医院接诊的50例适合保守治疗的椎体压缩骨折患者,连续治疗 6 个月。分别于治疗前、治疗后6 个月后,应用无体模定量CT检测方法,比较病人椎体骨密度,椎体高度百分比、Cobb 角以及临床资料等差异。结果 疗程结束后47例患者治疗有效,总有效率达94%。治疗后随访6个月,复查明确患者椎体高度百分比,与治疗前相比明显增高。测量脊柱后凸角度 Cobb 角、进行疼痛视觉模拟评分法(VAS)评分、Oswestry 功能障碍指数(ODI)与治疗前相比有明显降低。治疗前后对比差异显著(P<0.05);测量患者T11 椎体、T12 椎体、L1 椎体、L2 椎体、L3 椎体骨密度,与治疗前相比有明显增高,对比差异显著(P<0.05)。结论 由于无体模QCT技术可直接利用患者CT数据进行骨密度测量,对于骨折保守治疗的患者无需重新暴露在射线下即可测量骨密度,既能减少检查又能保护患者,社会效益显著。 展开更多
关键词 无体模定量CT 压缩骨折 保守治疗
下载PDF
QCT对腰椎BMD值的测量及BMD值与相关实验室指标分析 被引量:6
3
作者 孙微 郑建军 +3 位作者 方军杰 戴琦 陈斌 金银华 《医学影像学杂志》 2018年第1期141-144,共4页
目的探讨不同范围及部位的ROI选取对QCT测量腰椎松质骨BMD值的影响;BMD与血钙、血磷、ALP、PTH、BAP等相关实验室指标的相关性。方法收集2016年2月~2017年2月在我院行无体模QCT检查,且临床资料及相关实验室检查资料完整者46例,平均年龄(... 目的探讨不同范围及部位的ROI选取对QCT测量腰椎松质骨BMD值的影响;BMD与血钙、血磷、ALP、PTH、BAP等相关实验室指标的相关性。方法收集2016年2月~2017年2月在我院行无体模QCT检查,且临床资料及相关实验室检查资料完整者46例,平均年龄(66.73±5.71)岁。无体模QCT检查扫描L2~L4椎体中间层面,并通过后处理工作站分别选取不同直径的类圆形脂肪组织感兴趣区ROI(d=1.5cm及d=0.5cm)及不同部位(皮下脂肪组织及腹腔内脂肪组织)的ROI,测得相应腰椎松质骨BMD值;分析ROI不同的选取测得的BMD值对诊断骨质减少组及骨质疏松组是否有统计学差异。对血钙、血磷、ALP、PTH、BAP实验室指标与BMD值进行线性相关性分析。结果 BMD值随着年龄增大而减少;不同部位脂肪组织与骨质减少组和骨质疏松组的相关性如下:皮下脂肪组织ROI(d=1.5cm)骨质减少组BMD均值为(92.80±10.31)mg/cc,骨质疏松组BMD均值为(56.32±16.66)mg/cc;皮下脂肪组织ROI(d=0.5cm)骨质减少组BMD均值为(92.68±12.42)mg/cc;骨质疏松组BMD均值为(57.80±13.96)mg/cc;腹腔内脂肪组织ROI(d=0.5cm)骨质减少组BMD均值为(91.07±13.39)mg/cc;骨质疏松组BMD均值为(57.32±13.26)mg/cc;脂肪组织ROI的不同选取对骨质减少组间及骨质疏松组间BMD值均无统计学差异(P值均>0.05)。三种测量方法的BMD值与PTH值呈负相关,r值分别为=-0.530;-0.548;-0.604,P<0.01。BMD值与ALP、BAP、血钙、血磷指标无明显相关性(P>0.05)。结论 QCT后处理中不同范围和不同部位的脂肪组织ROI选取对BMD测量结果无明显影响,对于体型偏瘦者皮下脂肪ROI选取受限时,可缩小脂肪组织ROI选取范围或选取腹腔内脂肪替代;骨质疏松发生率与PTH指标升高具有相关性。 展开更多
关键词 骨质疏松 骨矿物质密度 层摄影术 X线计算机 无体模
下载PDF
Velocity Field and Variation of Wall Thickness During Tube Dieless Upsetting 被引量:1
4
作者 王忠堂 栾瑰馥 张士宏 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2004年第2期218-222,共5页
Theoretical analyses show that the variation of wall thickness is in direct proportion to outer-diameter, inter-diameter, and (1+R_s)^(1/2) (Rs is sectional increase ratio of tube), the theoretical calculated results ... Theoretical analyses show that the variation of wall thickness is in direct proportion to outer-diameter, inter-diameter, and (1+R_s)^(1/2) (Rs is sectional increase ratio of tube), the theoretical calculated results of wall thickness during tube dieless upsetting are very approximate to the experimental one. As the width of deformation field increases, both the variation of wall thickness and the derivative of wall thickness variation to width of deformation field (to/tf) reduce. 展开更多
关键词 dieless upsetting TUBE wall thickness velocity field
下载PDF
Numerical Simulation of Flameless Premixed Combustion with an Annular Nozzle in a Recuperative Furnace 被引量:33
5
作者 米建春 李鹏飞 郑楚光 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2010年第1期10-17,共8页
This paper reports an investigation of Computational Fluid Dynamics(CFD)on the influence of injection momentum rate of premixed air and fuel on the flameless Moderate or Intense Low oxygen Dilution(MILD) combustion in... This paper reports an investigation of Computational Fluid Dynamics(CFD)on the influence of injection momentum rate of premixed air and fuel on the flameless Moderate or Intense Low oxygen Dilution(MILD) combustion in a recuperative furnace.Details of the furnace flow velocity,temperature,O2,CO2 and NOx concentrations are provided.Results obtained suggest that the flue gas recirculation plays a vital role in establishing the premixed MILD combustion.It is also revealed that there is a critical momentum rate of the fuel-air mixture below which MILD combustion does not occur.Moreover,the momentum rate appears to have less significant influence on conventional global combustion than on MILD combustion. 展开更多
关键词 flameless oxidation premixed combustion numerical simulation
下载PDF
Influence of Vapor Cloud Shape on Temperature Field of Unconfined Vapor Cloud Explosion 被引量:5
6
作者 庞磊 张奇 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2010年第1期164-169,共6页
In order to analyze the influence of vapor cloud shape on temperature field effect of unconfined vapor cloud explosion(UVCE)and obtain creditable prediction method of explosion temperature effect,the transient tempera... In order to analyze the influence of vapor cloud shape on temperature field effect of unconfined vapor cloud explosion(UVCE)and obtain creditable prediction method of explosion temperature effect,the transient temperature fields of cylindrical and hemispherical UVCEs with same methane concentration and mass were numerically studied by computational fluid dynamics(CFD)technology.According to numerical simulation results, the concepts of UVCE’s temperature-near-field and temperature-far-field were proposed,the corresponding ranges were given,and the temperature attenuation laws and differences in corresponding regions with different vapor cloud shapes were presented.Through comparing with Baker fireball model,the accuracy and visualizability in acquisition of entire temperature effect based on numerical simulation were further validated.The functional relations among maximum temperature,horizontal distance,initial temperature and vapor cloud mass in temperature-near-field and temperature-far-field were deduced by means of data fitting,respectively.These conclusions provided quantitative basis for forecast and protection of UVCE disaster. 展开更多
关键词 unconfined vapor cloud explosion fireball injury temperature field numerical simulation safety evaluation
下载PDF
Study on Surface Properties for Non-polar Fluids with Density Functional Theory
7
作者 吴畏 陆九芳 +2 位作者 付东 刘金晨 李以圭 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2004年第2期256-262,共7页
The density functional theory, simplified by the local density approximation and mean-field approxi-mation, is applied to study the surface properties of pure non-polar fluids. A reasonable long rang correction is ado... The density functional theory, simplified by the local density approximation and mean-field approxi-mation, is applied to study the surface properties of pure non-polar fluids. A reasonable long rang correction is adopted to avoid the truncation of the potential. The perturbation theory is applied to establish the equation for the phase equilibrium, in which the hard-core chain fluid is as the reference fluid and the Yukawa potential is used as the perturbation term. Three parameters, ε/κ, d and ms, are regressed frorn the vapor-liquid equilibria, and the surface properties, including density profile, surface tension and local surface tension profile are predicted with these parameters. 展开更多
关键词 density functional theory surface tension density profile pure non-polar fluids
下载PDF
Genetic algorithms and aquifer parameter identification
8
作者 李竞生 姚磊华 李杨 《Journal of Coal Science & Engineering(China)》 2003年第2期48-53,共6页
In order to identify aquifer parameter,authors develops an improved combinatorial method called best chromosome clone plus younger generation chromosome prepotency genetic algorithm (BCC-YGCP-GA), based on a decimal s... In order to identify aquifer parameter,authors develops an improved combinatorial method called best chromosome clone plus younger generation chromosome prepotency genetic algorithm (BCC-YGCP-GA), based on a decimal system simple genetic algorithm (SGA). The paper takes unsteady state flows in a two dimensional, inhomogeneous, confined aquifer for a ideal model, and utilizes SGA and BCC-YGCP-GA coupled to finite element method for identifying aquifer hydraulic conductivity K 1 ,K 2 ,K 3 and storage S 1 ,S 2 ,S 3 , respectively. It is shown from the result that GSA does not reach convergence with 100 generations, whereas convergence rate of BCC-YGCD-GA is very fast. Objective function value calculated by BCC-YGCD-GA is 0 001 29 with 100 generations, and hydraulic conductivity and storage of three zones are almost equal to the "true" values of ideal model. 展开更多
关键词 aquifer parameter identification genetic algorithm ideal model finite element method
下载PDF
Development of Numerical Model for Radio Frequency Atmospheric Pressure Glow Discharges in Argon
9
作者 付平 钱宇俊 +2 位作者 宋书通 丁可 石建军 《Journal of Donghua University(English Edition)》 EI CAS 2011年第4期391-395,共5页
A one-dimensional,self-consistent fluid model is developed for a computational investigation on discharge characteristics and dynamics of radio frequency(RF) glow discharges in atmospheric argon,which are demonstrated... A one-dimensional,self-consistent fluid model is developed for a computational investigation on discharge characteristics and dynamics of radio frequency(RF) glow discharges in atmospheric argon,which are demonstrated through the spatial and temporal profiles of plasma species,electric field,and mean electron energy.Furthermore,in the discharge current density range from 7.1 mA/cm2 to 119.5 mA/cm2,different discharge operation modes of α and γ are indicated by changing differential conductivity of voltage-current characteristics and sheath dynamics in terms of sheath voltage and sheath thickness. 展开更多
关键词 atmospheric pressure glow discharge APGD numerical simulation mode transition sheath dynamics
下载PDF
An investigation of ab initio shell-model interactions derived by no-core shell model
10
作者 XiaoBao Wang GuoXiang Dong +2 位作者 QingFeng Li CaiWan Shen ShaoYing Yu 《Science China(Physics,Mechanics & Astronomy)》 SCIE EI CAS CSCD 2016年第9期52-58,共7页
The microscopic shell-model effective interactions are mainly based on the many-body perturbation theory (MBPT), the first work of which can be traced to Brown and Kuo's first attempt in 1966, derived from the Hama... The microscopic shell-model effective interactions are mainly based on the many-body perturbation theory (MBPT), the first work of which can be traced to Brown and Kuo's first attempt in 1966, derived from the Hamada-Johnstou nucleon-nucleon potential. However, the convergence of the MBPT is still unclear. On the other hand, ab initio theories, such as Green's function Monte Carlo (GFMC), no-core shell model (NCSM), and coupled-cluster theory with single and double excitations (CCSD), have made many progress in recent years. However, due to the increasing demanding of computing resources, these ab initio applications are usually limited to nuclei with mass up to A = 16. Recently, people have realized the ab initio construction of valence-space effective interactions, which is obtained through a second-time renormalization, or to be more exactly, projecting the full-many- body Hamiltonian into core, one-body, and two-body cluster parts. In this paper, we present the investigation of such ab initio shell-model interactions, by the recent derived sd-shell effective interactions based on effective J-matrix Inverse Scattering Potential (JISP) and chiral effective-field theory (EFT) through NCSM. In this work, we have seen the similarity between the ab initio shell- model interactions and the interactions obtained by MBPT or by empirical fitting. Without the inclusion of three-body (3-bd) force, the ab initio shell-model interactions still share similar defects with the microscopic interactions by MBPT, i.e., T = 1 channel is more attractive while T = 0 channel is more repulsive than empirical interactions. The progress to include more many-body correlations and 3-bd force is still badly needed, to see whether such efforts of ab initio shell-model interactions can reach similar precision as the interactions fitted to experimental data. 展开更多
关键词 shell model effective interactions ab initio methods
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部