基于预编码的用户间载波相位偏移纠正算法

物理层网络编码可以获得更高的频谱利用率,而用户间载波相位偏移易导致星座图扭曲,为了解决载波相位偏移问题,提出了基于预编码的用户间载波相位偏移纠正算法。首先将相位预失真向量引入到用户符号中,然后根据相位预失真向量对物理层网络编码信号进行相位均衡操作,并对置信传播算法进行相应改进,减少用户间载波相位偏移,最后采用仿真实验对算法的有效性进行了分析。实验结果表明,算法可以有效降低用户间载波相位偏移量,减少了无线通信系统的误码率,增强了无线通信系统的性能。

New Developments in Maritime Communications： a Comprehensive Survey

This paper summarizes the requirements for modem maritime wireless communication networks in the marine environments including the sea- to-sea and sea-to-shore communication scenarios. The existing maritime wireless communication sys- tems are presented and the development of the state-of-the-art maritime communication systems is surveyed. Furthermore, a hierarchical and integrated maritime network architecture is proposed to satisfy the increasing various classes of services which demand different Quality of Service （QoS）. Finally, the open issues for further development of maritime communications are identified.

Radio-map Establishment based on Fuzzy Clustering for WLAN Hybrid KNN/ANN Indoor Positioning

A novel radio-map establishment based on fuzzy clustering for hybrid K-Nearest Neighbor (KNN) and Artifi cial Neural Network (ANN) position algorithm in WLAN indoor environment is proposed. First of all, the Principal Component Analysis (PCA) is utilized for the purpose of simplifying input dimensions of position estimation algorithm and saving storage cost for the establishment of radio-map. Then, reference points (RPs) calibrated in the off-line phase are divided into separate clusters by Fuzzy C-means clustering (FCM), and membership degrees (MDs) for different clusters are also allocated to each RPs. However, the singular RPs cased by the multi-path effect signifi cantly decreases the clustering performance. Therefore, a novel radio-map establishment method is presented based on the modifi cation of signal samples recorded at singular RPs by surface fitting. In the on-line phase, the region which the mobile terminal (MT) belongs to is estimated according to the MDs firstly. Then, in estimated small dimensional regions, MT's coordinates are calculated byKNN positioning method for efficiency purpose. However, for the regions including singular RPs, ANN method is utilized because ofits great pattern matching ability. Furthermore, compared with other typical indoor positioning methods, feasibility and effectiveness of this hybrid KNN/ANN method are also verified by the experimental results in static and tracking situations.

PCCC for the performance improvement of the wireless optical communication system

In wireless optical communication, effects of scintillation make average Bit Error Rate （BER） deteriorate. To improve system performance,PCCC （Parallel Concatenated Convolutional Code） encoding scheme is employed,and upper bound on the bit error rate is given by considering the effects of scintillation,APD noise and thermal noise. Simulation results show that the POOC encoding scheme can relieve turbulenceinduced intensity fluctuations and the system performance is improved remarkably.

Power allocation and mode selection methods for cooperative communication in the rectangular tunnel

For the multipath fading on electromagnetic waves of wireless communication in the confined areas,the rectangular tunnel cooperative communication system was established based on the multimode channel model and the channel capacity formula derivation was obtained.On the optimal criterion of the channel capacity,the power allocation methods of both amplifying and forwarding(AF) and decoding and forwarding(DF) cooperative communication systems were proposed in the limitation of the total power to maximize the channel capacity.The mode selection methods of single input single output(SISO) and single input multiple output(SIMO) models in the rectangular tunnel,through which the higher channel capacity can be obtained,were put forward as well.The theoretical analysis and simulation comparison show that,channel capacity of the wireless communication system in the rectangular tunnel can be effectively enhanced through the cooperative technology;channel capacity of the rectangular tunnel under complicated conditions is maximized through the proposed power allocation methods,and the optimal cooperative mode of the channel capacity can be chosen according to the cooperative mode selection methods given in the paper.

Innovation and practice of TD-LTE for intelligent transportation systems (ITS)

Intelligent transportation system (ITS) has become a popular research topic to meet the increased demands of transportation safety,traffic efficiency,comfort in the journey and environment protection,etc. ITS applications impose higher requirements on wireless communication systems. For example,safety-related ITS services must always be low latency and entertainment-related ITS services need high data rate. The ITS dedicated short range communications (DSRC) technology to support the safetyrelated application is still under development, while long term evolution (LTE),as the next generation mobile communication systems,offers an efficient communication platform for ITS information exchange , which can meet most ITS services requirements of latency,data rate as well as communication range. In this paper,based on the time-division duplex (TDD) mode of LTE,i.e. TD-LTE,an enhanced TD-LTE network architecture is introduced to better support safety-related ITS application with low latency requirement,and some enhanced access schemes of TD-LTE are proposed to improve the performance of supporting the high-speed IP-based ITS applications in hotspots. At last,two practical application scenarios of enhanced TD-LTE systems are given.

A novel mutual authentication and key agreement protocol based on NTRU cryptography for wireless communications

In this paper, the authors present a novel mutual authentication and key agreement protocol based on the Number Theory Research Unit (NTRU) public key cryptography. The symmetric encryption, hash and “challenge-response” techniques were adopted to build their protocol. To implement the mutual authentication and session key agreement, the proposed protocol contains two stages: namely initial procedure and real execution stage. Since the lightweight NTRU public key cryptography is employed, their protocol can not only overcome the security flaws of secret-key based authentication protocols such as those used in Global System for Mobile Communications (GSM) and Universal Mobile Telecommunications System (UMTS), but also provide greater security and lower computational complexity in comparison with currently well-known public key based wireless authentication schemes such as Beller-Yacobi and M.Aydos protocols.

STUDY ON GIS BASED PREDICTION SYSTEM FOR RADIO WAVE PROPAGATION IN URBAN REGION

In this letter, an integrated application of the prediction for radio wave propagation with the Geographic Information System (GIS) is presented and a real prediction system based on GIS is implemented.

Wireless Relay Communication on High Speed Railway：Full Duplex or Half Duplex？

In this paper,we introduce one full-duplex(FD) relaying transmission scheme for high speed railway and compare its ergodic capacity and outage performance with half-duplex(HD) relaying scheme. Both decode-and-forward(DF) amplify-and-forward(AF) relay modes are considered. Moreover,the carriage penetration loss(CPL) and the self-interference(SI) cancellation ratio are investigated. We derive the closed-form expressions for the outage probability and ergodic capacity of both HD and FD relay transmission schemes. It is shown that when CPL is larger than a certain level,the FD relay can achieve better performance in terms of capacity and keep the outage probability in a low level. It is also found that three factors: AF or DF modes,CPL and SI cancellation ratio,can have impact on capacity performance,and that CPL is one decisive factor. Our results can provide theoretical supports for development and deployment of future wireless communication systems on high speed railways.

Simulation of chaotic synchronization communication system based on incoherent optical feedback and injection

In this paper,we numerically study chaotic synchronization communication system based on incoherent optical feedback and incoherent optical injection.The characteristics of the system,such as synchronization time,synchronization error,chaos shift keying encoding/decoding and modulation rate are analyzed.The results of simulation show that the system has good synchronization quality and good abilities of robust secure.The synchronization time is 1ns and the chaos shift keying encoding can reach a high rate of 1 Gbit/s.The system has a good ability of robust secure.It proves the feasibility of the optical secure communication.

Design and Implementation of Framework of Mobile GIS Based on Phone Terminal for Environmental Monitoring

This paper proposes a method for constructing an extensive wireless GIS network by utilizing Java cellular phone as GIS terminal for environmental monitoring through dynamic location disaster-emergency notification management of spatial databases. An experimental case study is demonstrated to show its potential in the application field.

Robust Transmission for Cognitive Relay Networks

In cognitive relay networks, the transmission of Secondary Users （SUs） suffers from the activity of Primary Users （PUs） and wireless channel fading. Therefore, how to achieve robust transmission for cognitive relay networks is a challenging task. In this paper, we propose a relaying transmission scheme which exploits robust beamforming at the physical layer and rateless codes at higher layers. We derive the optirml beamforng weight vector and analyze the perforrmnce of the pro- posed scheme when the channel estirmtion is not accurate between two SU nodes. We also study how the anaount of channel information between SU and PU impacts the system perforroance. Sinlation results validate our theoretical analysis and demonstrate that the proposed scheme can signifi- cantly enhance the system throughput.

Maximum likelihood channel estimation algorithm combines logarithm likelihood ratio decoding in the coal mine application

The environment of the wireless communication system in the coal mine has unique characteristics： great noise, strong multiple path interference, and the wireless communication of orthogonal frequency division multiplexing （OFDM） in underground coal mine is sensitive to the frequency selection of multiple path fading channel, whose decoding is separated from the traditional channel estimation algorithm. In order to increase its accuracy and reliability, a new iterating channel estimation algorithm combining the logarithm likelihood ratio （LLR） decode iterate based on the maximum likelihood estimation （ML） is proposed in this paper, which estimates iteration channel in combination with LLR decode. Without estimating the channel noise power, it exchanges the information between the ML channel estimation and the LLR decode using the feedback information of LLR decode. The decoding speed is very quick, and the satisfied result will be obtained by iterating in some time. The simulation results of the shortwave broadband channel in the coal mine show that the error rate of the system is basically convergent after the iteration in two times.

OFDM System Channel Estimation with Hidden Pilot

Channel estimation using pilot is common used in OFDM system.The pilot is usually time division multiplexed with the informative sequence.One of the main drawbacks is bandwidth losing.In this paper,a new method was proposed to perform channel estimation in OFDM system.The pilot is arithmetically added to the output of OFDM modulator.Receiver uses the hidden pilot to get an accurate estimation of the channel.Then pilot is removed after channel estimation.The Cramer-Rao lower bound for this method was deprived.The performance of the algorithm is then shown.Compared with traditional methods,the proposed algorithm increases the bandwidth efficiency dramatically.

Optical wireless network in home area based on white LED lights

A new optical wireless network based on white LED lights in home area is proposed. It is a duplex channel communication system utilizing signal emitters of white LED lights in the downlink and infrared devices in the uplink. Strategies for the system construction are given. Performance for users＇ mobile access of different kinds of optical concentrators is investigated. Indoor channel band-width is analyzed considering white LED light distribution, wall reflection, and receivers field of view （FOV）. Various modulation methods are discussed. A demo point-to-point system for surfing the net is constructed using a new line code of 4B6B which is developed to stabilize the optical output, and a peak data rate of 1 Mbps is achieved. This system is built into the lighting infrastructure, therefore decreasing the cost and offering a solution for wireless access in places which are sensitive to radio frequency like hospitals.

A Radio Communication System for Neuronal Signals

To collect neuronal activity data from awake, freely behaving animals, we developed miniature telemetry recording system. The integrated system consists of four major components： l） Microelectrodes and micro-driver assembly, 2） analog front end （AFE）, 3） programmable system on chip （PSoC）, and 4） ra- dio transceiver and the LabVIEW were used as a platform for the graphic user interface. The result showed the system was able to record and analyze neuronal recordings in freely moving animals and lasted continuously for a time period of a week or more. This is very useful for the study of the interdisciplinary research of neu- roscience and information engineering techniques. The circuits and architecture of the devices can be adapted for neurobiology and research with other small animals.

Polarization Projection for 3D Geometry-Based Stochastic Channel Model

Comprehensive radiation characteristics of polarized antenna are crucial in creating practical channel coefficients for next generation wireless communication system designs.Being currently supported within3 D geometry-based stochastic channel models(GSCM),field patterns are technically obtained by chamber measurement(or by its best fitting).However,in some channel related performance analysis scenarios,design insight can be crystallized better by starting the derivations with theoretical co-polarization and cross-polarization components.Specifically,these two components are mathematically linked with field patterns through the proposed polarization projection algorithm.In this manuscript,we focus on revealing the transformation criterion of polarization states between the antenna plane and the propagation plane.In practice,it makes retrieving the field patterns by electromagnetic computation possible.Meanwhile,the impact imposed by distinct antenna orientations is geometrically illustrated and consequently incorporated into the proposed algorithm.This will further facilitate flexible performance evaluation of related radio transmission technologies.Our conclusions are verified by the closed-form expression of the dipole field pattern(via an analytical approach) and by chamber measurement results.Moreover,we find that its 2D degenerative case is aligned with the definitions in 3^(rd) generation partnership project(3GPP)technical report 25.996.The most obvious benefit of the proposed algorithm is to significantly reduce the cost on generating channel coefficients in GSCM simulation.

Training sequence based channel estimation for indoor visible light communication system

Channel estimation is a key technology in indoor wireless visible light communications(VLCs).Using the training sequence(TS),this paper investigates the channel estimation in indoor wireless visible light communications.Based on the propagation and signal modulation characteristics of visible light,a link model for the indoor wireless visible light communications is established.Using the model,three channel estimation methods,i.e.,the correlation method,the least square(LS) method and the minimum mean square error(MMSE) method,are proposed.Moreover,the performances of the proposed three methods are evaluated by computer simulation.The results show that the performance of the correlation method is the worst,the LS method is suitable for higher signal to noise ratio(SNR),and the MMSE method obtains the best performance at the expense of highest complexity.

Talking About the PHS-ETC Online System

The PHS （Personal Handy phone System） technology developed in Japan realized high quality and low cost mobile communication in a micro cell and abundant valueadded services. Having considered many advantages of PHS, this paper proposed PHS-ETC online system as a technological evolution to substitute for the traditional DSRC-ETC. After comparing DSRC with PHS, this paper discussed the framework and layer structure of the DSRC and PHS system. Besides the functions concerned as vehicle identification and wireless communication, this paper also designed routing identification and toll apportionment functions to meet the needs of ETC. And the newly-designed functions could not be provided by DSRC system. By appending the Presentation Layer, the system could make full use of the existing function modules of DSRC and PHS, and the reconstruction would be greatly saved. Moreover, the system could extend many value-added services of PHS to the expressway, such as real-time traffic advisories, up-to-date navigation guidance, emergency communication, etc.