基于无线传感器网络定位技术的图书馆智能管理创新

"互联网+"时代,信息技术的发展对图书馆的智能化管理工作提出了更高的要求。文章概述了无线传感器网络与定位技术,重点讨论了如何将WSN定位技术运用到图书智能管理,通过定位技术与大数据、云计算等信息技术的结合,推动图书馆智能系统建设和智能化发展。

Home control system based on ZigBee wireless sensor networks

A new scheme of the home control system based on ZigBee wireless sensor networks is presented. The design and development of the software and hardware of the proposed system are given. In addition to the basic data acquisition and processing functions, the gateway supports the Bluetooth-based local interface and the general packet radio service （GPRS）-based remote interface. Users on the client service side can use a pocket PC or notebook PC to achieve real-time data acquisition and control instruction implementation, or remotely control the home control system through a mobile phone by sending a short message. The Labview graphical development environment is adopted to create PDA applications running on pocket PCs and monitoring platform established on notebook PCs. Except for the gateway, other nodes in the system work in sleep mode most of the time on the system, and thus it improves the lifetime of the whole system efficiently.

Physical layer design of wireless sensor network nodes

Major consideration dimensions for the physical layer design of wireless sensor network （WSN） nodes is analyzed by comparing different wireless communication approaches, diverse mature standards, important radio frequency （RF） parameters and various microcontroller unit （MCU） solutions. An implementation of the WSN node is presented with experimental results and a novel ＂one processor working at two frequencies＂ energy saving strategy. The lifetime estimation issue is analyzed with consideration to the periodical listen required by common WSN media access control （MAC） algorithms. It can be concluded that the startup time of the RF which determines the best sleep time ratio and the shortest backoff slot time of MAC, the RF frequency and modulation methods which determinate the RX and TX current, and the overall energy consumption of the dual frequency MCU SOC （ system on chip） are the most essential factors for the WSN node physical layer design.

A Novel Impedance Matching Approach for Passive UHF RFID Transponder ICs

This paper presents a novel impedance matching approach for passive UHF RFID transponder ICs,which are compatible with the ISO/IEC 18000-6B standard and operate in the 915MHz ISM band. The passive UHF RFID transponder with complex impedances is powered by received RF energy. The approach uses the parasitic inductance of the antenna to implement ASK modulation by adjusting the capacitive reactance of the matching network, which changes with the backscatter circuit. The impedance matching achieves maximum power transfer between the reader, antenna, and transponder. The transponder IC,whose operating distance is more than 4m with the impedance matching approach,is fabricated using a Chartered 0.35μm two-poly four-metal CMOS process that supports Schottky diodes and EEPROM.

Physiological signal acquisition system based on wireless sensor networks

Based on wireless sensor networks, a physiological signal acquisition system is proposed. The system is used in classroom education in order to understand the physiological changes in the students. In the system,the biological electrical signal related to student attention and emotion states can be measured by electrocardiography signals. The bioelectrical signal is digitalized at a 200 Hz sampling rate and is transmitted by the ZigBee protocol. Simultaneously, the Bluetooth technology is also embedded in the nodes so as to meet the high sampling rate and the high-bandwidth transmission. The system can implement the monitoring tasks for 30 students, and the experimental results of using the system in the classroom are proposed. Finally, the applications of wireless sensor networks used in education is also discussed.

An efficient reliability evaluation method for industrial wireless sensor networks

Aimed at the difficulties in accurately, comprehensively and systematically evaluating the reliability of industrial wireless sensor networks （WSNs）, a time-evolving state transition-Monte Carlo （TEST-MC） evaluation method and a novel network function value representation method are proposed to evaluate the reliability of the IWSNs. First, the adjacency matrix method is used to characterize three typical topologies of WSNs including the mesh network, tree network and ribbon network. Secondly, the network function value method is used to evaluate the network connectivity, and the TEST-MC evaluation method is used to evaluate network reliability and availability. Finally, the variations in the reliability, connectivity and availability of these three topologies are presented. Simulation results show that the proposed method can quickly analyze the reliability of the networks containing typical WSN topologies, which provides an effective method for the comprehensive and accurate evaluation of the reliability of WSNs.

LOCALIZATION ALGORITHM USING DISTANCE AND ANGLE INFORMATION IN WIRELESS SENSOR NETWORKS

A localization algorithm using distance and angle information is proposed in wireless sensor networks. Assuming that node axial orientations are unknown, all angles are measured to calculate the angle differences between two nodes viewed by the third one. Then, localization problems are formulated as convex optimization ones and all geometric relationships among different nodes in the communication range are transformed into linear or quadratic constraints. If all measurements are accurate, the localization problem can be formulated as linear programming （LP）. Otherwise, by incorporating auxiliary variables, it can be regarded as quadratic programming （QP）. Simulations show the effectiveness of the proposed algorithm.

Integrated Low-Power CMOS VCO and Its Divide-by-2 Dividers

An integrated low power CMOS VCO and its divide by 2 dividers for WLAN transceivers are presented.The VCO is based on on chip symmetrical spiral inductor and differential diode and the divide by 2 dividers are based on the ILFD technique.Due to differential LC tanks and ILFD techniques,power consumption is low.The circuit is implemented in a 0 18μm CMOS process.Measurements show the proposed circuit could produce 3 6/1 8GHz dual band LO signals with a wide tuning range and low phase noise.1 8GHz LO signals are quadrature.It consumes 5mA at V DD =1 5V.The size of die area is only 1 0mm×1 0mm.

Tightly-coupled model for INS/WSN integrated navigation based on Kalman filter

Aiming at the problem of poor observability of measurement information in the loosely-coupled integration of the inertial navigation system （INS） and the wireless sensor network （WSN）, this paper presents a tightly-coupled integration based on the Kalman filter （KF）. When the WSN is available, the difference between the distances from the blind node（BN） to the reference nodes （RNs） measured by the INS and those measured by the WSN are used as measurement information for the KF due to its better observability and independence, which can effectively improve the accuracy of the KF. Simulations show that the proposed approach reduces the mean error of the position by about 50% compared with loosely-coupled integration, while the mean error of the velocity is a little higher than that of loosely-coupled integration.

Distributed H_∞ fusion filter design for INS/WSN integrated positioning system

In order to keep stable navigation accuracy when the blind node （BN） moves between two adjacent clusters, a distributed fusion method for the integration of the inertial navigation system （INS） and the wireless sensor network （WSN） based on H∞ filtering is proposed. Since the process and measurement noise in the integration system are bounded and their statistical characteristics are unknown, the H∞ filter is used to fuse the information measured from local estimators in the proposed method. Meanwhile, the filter can yield the optimal state estimate according to certain information fusion criteria. Simulation results show that compared with the federal Kalman solution, the proposed method can reduce the mean error of position by about 45% and the mean error of velocity by about 85 %.

Monitoring System for Field Soil Water Content Based on the Wireless Sensor Network

[Objective] To water content monitoring study the application of wireless sensor network in field so and to discuss the methods for solving the problems of low sampling rate, high cost and poor real-time in actual monitoring. [Method] The architecture of wireless sensor network, network nodes, hardware design as well as principle for the program structure of software operating system and corresponding parameters were analyzed to illustrate the characteristics of monitoring system for field soil water content based on wireless sensor network, and the advantages in application of this system. [Result] Sensor nodes could correctly collect and transmit soil water content, realize stable data transmission of soil water content, indicating that wireless sensor network is suitable for real-time monitoring of field soil water content. [Conclusion] This study indicates that wireless sensor network possesses a widely application foreground in the development of agriculture.

Design and Implementation of Programmable RS Codec Module in Satellite Communication Modem

In the study and implementation of a programmable RS codec module in satellite communication modem, FPGA is used as the kernel in the implementation, while some ASICs are used as necessary assistant measures. The module includes the RS codec unit, the interleaver and deinterleaver unit, the scrambler and descrambler unit and the frame synchronization unit. The module is realized successfully and it can be programmed on-line to meet the requirements of IESS 308/309/310 including many specifications about different service types and data rates. With the implementation combining FPGA with ASICs, size of the circuit is much reduced, its flexibility dramatically increased, and its stability further strengthened. Furthermore, the module is based on the software radio concept and can be easily integrated into the whole satellite communication modem.

Speed Sensorless Vector Control of Induction Motor Based on Reduced Order Extended Kalman Filter

A speed sensorless vector control system of induction motor with estimated rotor speed and rotor flux using a new reduced order extended Kalman filter is proposed. With this method, two rotor flux components are selected as the state variables, and the rotor speed as an estimated parameter is regarded as an augmented state variable. The algorithm with reduced order decreases the computational complexity and makes the proposed estimator feasible to be implemented in real time. The simulation results show high accuracy of the estimation algorithm and good performance of speed control, and verify the usefulness of the proposed algorithm.

LOW COST IMPLEMENTATION OF SPEED SENSORLESS INDUCTION MOTOR CONTROL USING STATOR FLUX ORIENTATION

The control platform of the induction motor （IM） with low costs is developed by using DSP MC56F8013 with a good performance/price rtaio. The control algorithm for the speed sensorless IM is studied based on the stator flux orientation （SFO）. The algorithm structure is simple to be implemented and cannot be influenced by motor parameters, The improved stator flux estimation is used to compensate errors caused by the low pass filter （LPF）. A new speed regulator is designed to ensure the system working with the maximal torque in the transient state. The system simulation and the prototype experiment are made. Results show that the con- trol system has good dynamic and static performance.

The Study of Farmland Information Management System based on Wireless Sensor Networks

To satisfy the need of good quality and high yield primary production,the farmland information management system based on wireless Sensor Network has been proposed.We give priority to analyzing the basic function of the system,building the systematic structure of applied system and network system,and implementing the energy control and safety design of system.The system can reduce manpower operation and the error of manual measuration in the course of practical production,reduce the cost of agricultural production,and realize automatization of agricultural production to the largest extent to provide an effective way to realize good quality and high yield primary production,which has an important realistic meaning.

Anti-reverse rotation startup method for sensorless brushless DC motor

In order to start up the brushless DC motor （BLDCM） without reverse rotation and smoothly switch the running state of the motor, a novel startup and smoothly switching method for a sensodess BLDCM is presented. Based on the saturation effect of the stator iron, six short voltage pulses are applied to determine the initial rotor position and the rotor can be found within 60°. After that, a series of short and long voltage pulses are used to accelerate the motor and the variation of the response current is utilized to detect the rotor position dynamically. When the motor reaches a certain speed at which the back-electromotive force （EMF） method can be applied, all the power devices are turned off and the running state of the motor is smoothly switched at the moment determined by the relationship between the terminal voltage waveform and the commutation phases. The experimental results verify the feasibility and validity of the proposed method.

CMOS low-dropout regulator with 3.3 μA quiescent current without off-chip capacitor

A CMOS （complementary metal-oxide-semiconductor transistor） low-dropout regulator （LDO） with 3. 3 V output voltage and 100 mA output current for system-on-chip applications to reduce board space and external pins is presented. By utilizing a dynamic slew-rate enhancement（SRE） circuit and nested Miller compensation （NMC） on the LDO structure, the proposed LDO provides high stability during line and load regulation without off-chip load capacitors. The overshot voltage is limited within 550 mV and the settling time is less than 50 μs when the load current decreases from 100 mA to 1 mA. By using a 30 nA reference current, the quiescent current is 3.3 μA. The proposed design is implemented by CSMC 0. 5 μm mixed-signal process. The experimental results agree with the simulation results.

SI-INSPIRED ENERGY AWARE QoS ROUTING TREE FOR WSN

A heuristic theoretical optimal routing algorithm （TORA） is presented to achieve the data-gathering structure of location-aided quality of service （QoS） in wireless sensor networks （WSNs）. The construction of TORA is based on a kind of swarm intelligence （SI） mechanism, i. e. , ant colony optimization. Firstly, the ener- gy-efficient weight is designed based on flow distribution to divide WSNs into different functional regions, so the routing selection can self-adapt asymmetric power configurations with lower latency. Then, the designs of the novel heuristic factor and the pheromone updating rule can endow ant-like agents with the ability of detecting the local networks energy status and approaching the theoretical optimal tree, thus improving the adaptability and en- ergy-efficiency in route building. Simulation results show that compared with some classic routing algorithms, TORA can further minimize the total communication energy cost and enhance the QoS performance with low-de- lay effect under the data-gathering condition.

(α,β)-constraints connected dominating set algorithm in wireless sensor network

To cope with the constraint problem of power consumption and transmission delay in the virtual backbone of wireless sensor network, a distributed connected dominating set （CDS） algorithm with （α,β）-constraints is proposed. Based on the （α, β）-tree concept, a new connected dominating tree with bounded transmission delay problem（CDTT） is defined and a corresponding algorithm is designed to construct a CDT-tree which can trade off limited total power and bounded transmission delay from source to destination nodes. The CDT algorithm consists of two phases： The first phase constructs a maximum independent set（MIS）in a unit disk graph model. The second phase estimates the distance and calculates the transmission power to construct a spanning tree in an undirected graph with different weights for MST and SPF, respectively. The theoretical analysis and simulation results show that the CDT algorithm gives a correct solution to the CDTF problem and forms a virtual backbone with（ α,β）-constraints balancing the requirements of power consumption and transmission delay.

Global stabilization for a class of nonlinear time-delay systems using linear output feedback

The stabilization problem via the linear output feedback controller is addressed for a class of nonlinear systems subject to time-delay.The uncertainty of the system satisfies the lower-triangular growth condition and it is affected by time-delay. A linear output feedback controller with a tunable scaling gain is constructed.By selecting an appropriate Lyapunov-Krasovskii functional the scaling gain can be adjusted to render the closed-loop system globally asymptotically stable.The results can also be extended to the non-triangular nonlinear time-delay systems. The proposed control law together with the observer is linear and memoryless in nature and therefore it is easy to implement in practice. Two computer simulations are conducted to illustrate the effectiveness of the proposed theoretical results.