杉木无性系生长的遗传控制和早期选择初探

对两片包括 1 8个和 1 7个无性系试验林历年树高和胸径作了测量 ,分析了树高和胸径历年位次 ,表型和遗传相关 ,遗传力、遗传和环境方差随年龄增高的时间趋势 ,历年树高和胸径与最后一年测量中所计算的单株材积的表型和遗传相关等。看到无论树高还是胸径 ,早—晚龄的表型和遗传相关都是极显著的 ,但少数生长型和生长动态模式偏离常态的无性系影响着这些参数在树龄间的稳定性。认为杉木的适宜早期选择年龄在4～ 6a生时 ,但最好从 3a后开始采用两阶段逐步评价和选择的策略 ,第 1阶段先按树高初选 ,第 2阶段按胸径或单株材积做出决选 ,既保证了选择的可靠性 。

Effects of Drought Stress on Osmotic Regulation Substances of Five Catalpa bungei Clones

[Objective] This study aimed to investigate the effects of drought stress on osmotic regulation substances of Catalpa bungei clones. [Method] Potting experimental was carried out with plastic film sealing method, to differentiate the degrees of drought stress based on changes in soil water content and leaf water potential and investigate variations in contents of osmotic regulation substances（free proline,soluble sugar and soluble protein） in leaves of five Catalpa bungei clones under different degrees of drought stresses. [Result] According to changes in soil water content and leaf water potential, the whole process of drought stress was divided into normal level（CK, with soil water content of 97.49% and leaf water potential of-0.54MPa）, light drought（LD with soil water content of 59.96% and leaf water potential of-1.28 MPa）, mediate drought（MD with soil water content of 34.19% and leaf water potential of-2.32 MPa） and severe drought（SD with soil water content of 14.52%and leaf water potential of-2.99 MPa）. The soil water content and leaf water potential of five Catalpa bungei clones reached the highest correlation in exponential fitting, with an average R2of 0.989 3（P0.001）. The free proline content in leaves of five Catalpa bungei clones increased rapidly with the increasing degree of drought stress（P 0.001）. To be specific, free proline contents of Catalpa bungei clones015-1 and 7080 were 34.39 and 33.41 times of the normal level under severe drought conditions, which reached an extremely significant level（P0.001）; the free proline content of Catalpa bungei clone 1-3 rapidly increased to（855.46±227.52） μg/g Fw under light drought conditions. The soluble protein content in leaves showed different variation trends. To be specific, the soluble protein content of Catalpa bungei clone 7080 was the lowest at various drought stages and reached（1.644 ±0.137）mg/g Fw under normal conditions; the soluble protein content of Catalpa bungei clone 1-3 was relatively high under normal conditions and was reduced rapidly under light drought conditions, showing different response patterns. [Conclusion] Osmotic regulation substances in leaves of five Catalpa bungei clones all have certain response to drought stress. Free proline is the most important osmotic regulation substance, followed by soluble protein, while soluble sugar makes no significant contribution. According to changes in content of osmotic regulation substances, Catalpa bungei clone 7080 has relatively high capacity and good drought resistance, while Catalpa bungei clone 1-3 has the rapidest response to drought stress.

Characteristic atom sequences of Nb-Mo alloys system in BCC structure and properties of disordered alloys

Comprehensively considering energy, volume and electronic structure of alloys, the ninth equation was determined as the interaction function of Nb-Mo alloys system in BCC structure on the basis of idea of systematic science of alloys, experimental lattice constants and heats of formation of disordered Nb（1-x）Mox alloys. The structural parameters and properties of Nb and Mo characteristic atoms sequences and corresponding characteristic crystals sequences were determined in Nb-Mo alloys system. The electronic structure and physical properties of disordered Nb（1-x）Mox alloys system were calculated according to concentration of characteristic atoms of disordered alloys. The change trend of physical properties is the same as that of electronic structure.

Variation of microfibril angle and its correlation to wood properties in poplars

The microfibril angle of seven poplar clones was determined by using X-ray diffraction technique. Microfibril angle, wood basic density, fiber length, fiber width and cellulose content were assessed for every growth ring at breast height for all sample trees. Significant variation in microfibril angle was observed among growth rings. Mean microfibril angle (MFA) at breast height varied from 7.8?to 28?between growth rings with cambial age and showed a consistent pith-to-bark trend of decline an-gles. Analysis of variance also indicated that there were significant differences in wood basic density, fiber length, fiber width and cellulose content between the growth rings, which had an increasing tendency from pith to bark. Correlations between MFA and examined wood properties were predominantly large and significant negative (?0.01), and the coefficients were -0.660 for cellulose content, -0.586 for fiber length, -0.516 for fiber width and -0.450 for wood basic density, respectively. Regression analysis with linear and curve estimation indicated that a quadratic function showed the largest R2 and the least standard error for describing the relationships between microfibril angle and measured wood properties, and the correlation coefficients were over -0.45 (n=125). The results from this study suggested that microfibril angle would be a good characteristic for improvement in the future breeding program of poplars.

Performance and Inheritance of Rice Starch RVA Profile Characteristics

The classification and inheritance of rice starch RVA profiles were studied by testing RVA profiles of F2 clonally propagated population and some varieties, including japonica, indica, and glutinous types. All the RVA profiles of accessions could be divided into six kinds based on the cluster analysis, that is A, B, C, D, E and F. Feature profile of sticky variety was type A. The profiles of indica varieties could be presented as B, C, D, E and F types and that of japonica varieties fell into D, E and F types.RVA profiles of the rice were mainly affected by apparent amylose content (AAC), but the difference of RVA profiles could also be detected in the varieties with similar AAC. The close relationship between RVA profile indices and sensory of low or middle AAC varieties suggested that the RVA profiles can be used as indirect index to evaluate eating and cooking quality. In four hybrid combinations, the component indices of RVA profiles of F1 were between those of its parents except peak viscosity and pasting temperature. Also, in F2 clonally propagated population, all the components of the RVA profiles showed continuous segregation,suggesting that all of them were controlled by a series of minor genes, although Wx gene may play an important role in determining the RVA profiles. These results may provide some new information useful for rice quality breeding program.

Influences of Structure Disorder and Temperature on Properties of Proton Conductivity in Hydrogen-Bond Molecular Systems

The dynamic properties of proton conductivity along hydrogen-bonded molecular systems, for example, ice crystal, with structure disorder or damping and finite temperatures exposed in an externally applied electric-field have been numerically studied by Runge-Kutta way in our soliton model. The results obtained show that the proton-soliton is very robust against the structure disorder including the fluctuation of the force constant and disorder in the sequence of masses and thermal perturbation and damping of medium, the velocity of its conductivity increases with increasing of the externally applied electric-field and decreasing of the damping coefficient of medium, but the proton-soliton disperses for quite great fluctuation of the ＂force constant and damping coefficient. In the numerical simulation we find that the proton-soliton in our model is thermally stable in a large region of temperature of T ≤ 273 K under influences of damping and externally applied electric-field in ice crvstal. This shows that our model is available and appropriate to ice.

CO_2 Leakage Identification in Geosequestration Based on Real Time Correlation Analysis Between Atmospheric O_2 and CO_2

The paper describes a method for monitoring CO2 leakage in geological carbon dioxide sequestration. A real time monitoring parameter, apparent leakage flux(ALF), is presented to monitor abnormal CO2 leakage, which can be calculated by atmospheric CO2 and O2 data. The computation shows that all ALF values are close to zero-line without the leakage. With a step change or linear perturbation of concentration to the initial CO2 concentration data with no leakage, ALF will deviate from background line. Perturbation tests prove that ALF method is sensitive to linear perturbation but insensitive to step change of concentration. An improved method is proposed based on real time analysis of surplus CO2 concentration in least square regression process, called apparent leakage flux from surplus analysis(ALFs), which is sensitive to both step perturbation and linear perturbations of concentration. ALF is capable of detecting concentration increase when the leakage occurs while ALFs is useful in all periods of leakage. Both ALF and ALFs are potential approaches to monitor CO2 leakage in geosequestration project.

Effects of Scale-Free Topological Properties on Dynamical Synchronization and Control in Coupled Map Lattices

In the paper, we study effects of scale-free （SF） topology on dynamical synchronization and control in coupled map lattices （CIVIL）. Our strategy is to apply three feedback control methods, including constant feedback and two types of time-delayed feedback, to a small fraction of network nodes to reach desired synchronous state. Two controlled bifurcation diagrams verses feedback strength are obtained respectively. It is found that the value of critical feedback strength γc for the first time-delayed feedback control is increased linearly as e is increased linearly. The GML with SF loses synchronization and intermittency occurs if γ 〉 γc. Numerical examples are presented to demonstrate all results.

Geochemical characteristics of Galandrud coal in central Alborz, Iran

This study focuses on the geochemistry of trace elements and parameters of coal quality of bituminous coal belonging to the upper Triassic-lower Jurassic era, collected from the Galandrud region in Central Alborz, northern Iran. Galandrud coal on an air-dried basis are characterized by broad variation in the amount of ash （ranging from 6.49g to 12.73%）, a high content of volatile matter （33,32-37.45%） and high gross calorific values （7430-8880 kcal/kg）. The mineral matter of the coal samples studied is made up of dolomite （〉909g）, quartz, sphalerite, galena, pyrite and clay minerals. Major elements are positively cor- related with ash content suggesting an association with inorganic constituents. Based on statistical anal- yses, concentrations of trace elements such as Co （51.3 ×10^-6-152.9× 10^-6）, Ba （368× 10^-6-3297.4×10^-6）, Cr （65.5 ×10^-6-194.2 × 10^-6）, Mo （5.6 × 10^-6-18.2× 10^-6）, Hi （72.9 × 10^-6-152.9 × 10^-6） and V （245.5 × 10^-6-520 ×10^-6） are higher than world coal averages. However, low concentration of some vol- atile elements such as As, Hg and U are present in low concentrations of the various types of coal studied.

New application notion of pipeline transport——integrated in industry solid waste innocuous and efficient disposition

In order to solve transport problems of industry solid,firstly,a new applicationnotion of pipeline transport was presented,that is to say,combining pretreatment andtransport with disposal techniques of industry solid waste.Secondly,the integrated dis-posal and transport system for industry solid waste was introduced,in particular,the oper-ating principles,equipment set-up,key technology and technical parameters.Next,thispaper illustrated the application of this integrated system.Such as it can transport coalsludge with sufficiently high solids content(about 72%～77%)and high apparent viscosity(about 1 000～3 000 Pa.s)directly by pipeline having no use for water and addition agent.Generally,the transport distance is about 1 000 m.This system has been successfullyused in innocuous disposition and efficient utilization of other industrial byproducts or solidwastes,such as city sludge and paper making waste.The integrated system causes nopollution to the environment for its complete seal and realizes protecting the environment,conserving the energy,promoting the development of cycling economic.Finally,the paperdiscussed the research works that were needed for studying such pipeline transport sys-tem and narrates the relevant condition and application status.

Study on Surface Properties for Non-polar Fluids with Density Functional Theory

The density functional theory, simplified by the local density approximation and mean-field approxi-mation, is applied to study the surface properties of pure non-polar fluids. A reasonable long rang correction is adopted to avoid the truncation of the potential. The perturbation theory is applied to establish the equation for the phase equilibrium, in which the hard-core chain fluid is as the reference fluid and the Yukawa potential is used as the perturbation term. Three parameters, ε/κ, d and ms, are regressed frorn the vapor-liquid equilibria, and the surface properties, including density profile, surface tension and local surface tension profile are predicted with these parameters.

Effect of inorganic additives on physical and chemical properties of PEO-LiClO_4 polymer electrolyte for lithium-ion batteries

Inorganic additives-added PEO-based solid composite polymer electrolyte (SCPE) was prepared using solution casting method. The effects of LiNi0.8Co0.2O2 on the physical and chemical properties of the electrolyte were investigated. The products were characterized by X-ray diffraction (XRD), Fourier transform infrared spectrometer (FTIR) and differential scanning calorimetry (DSC). The electrochemical performances of SCPE were measured. Results show that properties of the SCPE are improved significantly by adding LiNi0.8Co0.2O2 into PEO polymer electrolyte. Its conductivity reaches 5×10-4 S/cm(25 ℃) while retaining good mechanical and processing properties.

Preparation of jarosite by Acidithiobacillus ferrooxidans oxidation

The formation ofjarosite in the presence of Acidithiobacillusferrooxidans （A. ferrooxidans） was researched to ascertain the conditions of producing minimum precipitation. The effects of salt concentration and pH on the characteristics ofjarosite formed in K2SO4/（NHa）2SOa-FeSO4 inorganic salt solution and 9K medium were studied by using the measurements of scanning electron microscope, X-ray diffraction, Fourierism transform infrared analysis, thermogravity/differential thermogravity analysis and particle size analysis to evaluate the product. The results indicate that the formation of jarosite begins when A. ferrooxidans reaches logarithmic growth phase in 9K medium, and a higher pH value is beneficial to the formation of jarosite. The jarosite formed in 9K medium has smaller and more concentrative particle size and smoother surface than that formed in inorganic salt solution.

Preparation, Properties and Application of Polymeric Organic-Inorganic Nanocomposites

Six preparation methods for polymeric organic-inorganic nanocomposites and their respective mechanisms and features are reviewed. The extraordinary properties of polymeric organic-inorganic nanocomposites are discussed,and their potential applications are evaluated.

Quantum Chemistry Study on Local Structure and Properties of Amorphous Fe80P20 Alloy

According to the structure features of Fe80P20, A series of clusters Fe4P were designed and focused on studying the stability of local structure, charge distribution and chemical bond, Using the DFT method, energy and structure of Fe4P clusters were optimized and analyzed. The computational results showed that the energy of cluster 1（2） has the lowest energy, and the possibility of its existence in the Fe80P20 is high. Analyzing the transition states among the clusters, it was found that the clusters in the doublet state are more stable than those in the quartet state. The numbers of the Fe-P bond in the clusters play important roles in the cluster stability and electrons transfer properties, The more numbers of Fe-P bonds in the clusters, the higher the cluster stability, and the weaker the ability of P atom to get electron, The number of Fe atoms, which has bonding interactions with the P atom, is direct proportional to the average 3d orbit population of Fe atom. Basing on the orbital population, average magnetic moments of each Fe atom in the Fe4P clusters were calculated, and they are all smaller than that of single metal Fe atom. This suggests that all Fe4P clusters have soft magnetic property and they are expected to be perfect material for preparing soft magnetic apparatus.

Correlations among Important Fruit Quality and Plant Characteristics of Some Fig Genotypes

Experiments were carried to determine correlations of important fruit and plant characteristics using 30 fig genotypes. The correlation coefficients between these traits were calculated using SAS program. Fruit weight, fruit diameter, fruit length, neck length, ostiolium width, abscission of the stalk from the twig, ease of peeling, fruit skin cracks, thickness of the fruit skin, texture of skin, fruit ribs, fruit internal cavity, TSS （total soluble solids）, pH, acidity, TSS/acidity, trunk diameter, shoot length, yield per tree were traits examined in the study. According to five-year data, fruit weight was found to have positive correlation by fruit diameter （r = 0.92; P 〈 0.01）, fruit length （r = 0.81; P 〈 0.01）, neck length （r = 0.35; P 〈 0.01）, ostiolium width （r = 0.23; P 〈 0.01）, trunk diameter （r = 0.26; P 〈 0.01）, fruit skin cracks （r = 0.26; P 〈 0.01） and negative correlation by TSS （r = -0.26; P 〈 0.01） and fruit ribs （r = -0.21; P 〈 0.01）. Relations between some traits such as ostiolium width, abscission of the stalk from the twig, ease of peeling, fruit skin cracks, texture of skin and fruit ribs are deviated based on the years. Some relationships between fig fruit characteristics exist, which may help researchers to solve some problems such as ostiolium width and fruit skin cracking. These studies may contribute to producing fruit with a good quality and help to evaluate new cultivars.

Experimental investigation on performance of intumescent coating for steel plate at elevated temperature

Twenty tests were conducted to investigate the efficiency of the intumescent coating designed to protect steel plate at the elevated temperature, by means of electrical furnace. And the factors of the initial thickness of coating and temperature of electrical furnace were considered. The high temperature response behavior of the intumescent coating was observed. And the expansion form of ultrathin intumescent coating and the temperature of the steel plate(TS) were obtained. Besides, the heat flux from expansion layer to steel plate versus time was analyzed in order to evaluate the heat transfer effect of intumescent coating on steel plate. The experimental results show that the response behaviors of the coating subjected to fire could be divided into four phases: stabilization phase, foaming expansion phase, carbonization-consumption phase and inorganic layer phase. And the net heat flux to the steel plate decreased observably in the foaming expansion phase, while the surplus white inorganic substance, which is the residue of the intumesced char layer in the inorganic layer phase under the condition of the temperature of the electrical furnace(TEF) beyond 700 °C over 1 h, has little effect on fire protection for the steel plate.

Green Synthesis of RuO2 Electrode for Electrochemical Water Treatment

Nowadays, the electrochemical water treatments are very important methods used for the removal of organic and inorganic impurities from fresh, drinking water and wastewater. The method consists of carrying out the oxidation reaction at the anode where pollutants are transferred into non-toxic substances, by decomposing into simpler compounds or transferring into oxidation form. RuO2-based Dimensional Stable Anode （DSA） is a technologically good and important electrode for water treatment because of its unique characteristics such as high thermal and chemical stability, low resistivity and low overpotential. This paper reviews the methods for fabricating RuO2-based electrodes that can be used in electrochemical water treatment. Depending on the different fabrication routes, RuO2 electrodes will possess the different electro-catalytic property and stability.

3DT-PP:localization and path planning of mobile anchors over complex 3D terrains

Mobile anchors are widely used for localization in WSNs.However,special properties over 3D terrains limit the implementation of them.In this paper,a novel 3D localization algorithm is proposed,called 3 DT-PP,which utilizes path planning of mobile anchors over complex 3 D terrains,and simulations based upon the model of mountain surface network are conducted.The simulation results show that the algorithm decreases the position error by about 91%,8.7%and lowers calculation overhead by about 75%,1.3%,than the typical state-of-the-art localization algorithm(i.e.,'MDS-MAP','Landscape-3D').Thus,our algorithm is more potential in practical WSNs which are the characteristic of limited energy and 3D deployment.

Social-Aware Cooperation Among Mobile Terminals for Wireless Downlink Transmission

This paper investigates the social-aware cooperation(SAC) among mobile terminals(MTs), motivated by the fact that modern smart devices have much improved context awareness. Aware of the social ties, the cooperative network contains two layers of property: social and physical. In order to observe how the social awareness benefit the cooperation performance, we first formulate the social ties between MTs into parameters that can describe the cooperative behaviors by taking the mobility feature into account, defined as the conviction-approval-suspicion(CAS) model. Limited by the processing capability, partner selection is of great practical significance. To this end, the social-aware partner selection strategy is analyzed, and a significant superiority is observed compared to social-unaware selection. By analyzing the cooperative throughput, an explicit relationship between the degrees-of-freedom gain and the social-physical property is finally derived. Simulation results validate the theoretical analysis.