Poly (EA-MAn-APTES)/silica hybrid materials were successfully prepared fromEthyl acrylate (EA), maleic anhydride (MAn) and tetraethoxysilane (TEOS) in the presence of acoupling agent 3-aminopropyltriethoxysilane (APTE...Poly (EA-MAn-APTES)/silica hybrid materials were successfully prepared fromEthyl acrylate (EA), maleic anhydride (MAn) and tetraethoxysilane (TEOS) in the presence of acoupling agent 3-aminopropyltriethoxysilane (APTES),by free-radical solution polymerization and insitu sol-gel process. The mass fraction of TEOS varied from 0 to 25%. The hybrid materials werecharacterized by the methods of FT-IR spectra, solvent extraction, scanning electron microscope (SEM), transmission electron microscope (TEM), differential scanning calorimetry (DSC) andthermogravimetric analysis (TGA) measuring apparatus to get their structures, gel contents,morphologies, particle sizes and thermal performances. The results show that the covalent bonds arebetween organic and inorganic phases, gel contents in the hybrid materials are much higher, theSiO_2 phase is well dispersed in the polymer matrix, silicon dioxide exist at nanoscale in thecomposites and have excellent thermal stability.展开更多
Into the photooxidation process, several factors such as pH, time of irradiation, dose of UV light, lamp power, contaminant concentration, turbidity of the solution and the presence of salts can interfere with the pho...Into the photooxidation process, several factors such as pH, time of irradiation, dose of UV light, lamp power, contaminant concentration, turbidity of the solution and the presence of salts can interfere with the photodegradation of pollutants. This research aims to evaluate the influence of salts： NaCl, MgCl2, CaCI2, BaC12, CuCl2, Na2SO4, MgSO4, MnSO4, FeSO4, CuSO4, Na3PO4, K2CrO4 and K2Cr207 in concentrations of 0.0005 M, 0.005 M and 0.05 M during photodegradation of aqueous solution of 59.5 mg/L of nitrobenzene at a pH of 2.5. It was observed that the presence of salts such as CuCI2, CuSO4, FeSO4, K2CrO4 and K2Cr207 interfere negatively in the system UV/H202 applied for degradation of nitrobenzene; possibly by oxidation of Fe2＋ to Fe3＋ and Cu＋ to Cu2＋ in the Cr case, due to the difficulty of transforming the Cr6＋ to Cr3＋ or because these solutions have color and act as radiation absorbing filter.展开更多
文摘Poly (EA-MAn-APTES)/silica hybrid materials were successfully prepared fromEthyl acrylate (EA), maleic anhydride (MAn) and tetraethoxysilane (TEOS) in the presence of acoupling agent 3-aminopropyltriethoxysilane (APTES),by free-radical solution polymerization and insitu sol-gel process. The mass fraction of TEOS varied from 0 to 25%. The hybrid materials werecharacterized by the methods of FT-IR spectra, solvent extraction, scanning electron microscope (SEM), transmission electron microscope (TEM), differential scanning calorimetry (DSC) andthermogravimetric analysis (TGA) measuring apparatus to get their structures, gel contents,morphologies, particle sizes and thermal performances. The results show that the covalent bonds arebetween organic and inorganic phases, gel contents in the hybrid materials are much higher, theSiO_2 phase is well dispersed in the polymer matrix, silicon dioxide exist at nanoscale in thecomposites and have excellent thermal stability.
文摘Into the photooxidation process, several factors such as pH, time of irradiation, dose of UV light, lamp power, contaminant concentration, turbidity of the solution and the presence of salts can interfere with the photodegradation of pollutants. This research aims to evaluate the influence of salts： NaCl, MgCl2, CaCI2, BaC12, CuCl2, Na2SO4, MgSO4, MnSO4, FeSO4, CuSO4, Na3PO4, K2CrO4 and K2Cr207 in concentrations of 0.0005 M, 0.005 M and 0.05 M during photodegradation of aqueous solution of 59.5 mg/L of nitrobenzene at a pH of 2.5. It was observed that the presence of salts such as CuCI2, CuSO4, FeSO4, K2CrO4 and K2Cr207 interfere negatively in the system UV/H202 applied for degradation of nitrobenzene; possibly by oxidation of Fe2＋ to Fe3＋ and Cu＋ to Cu2＋ in the Cr case, due to the difficulty of transforming the Cr6＋ to Cr3＋ or because these solutions have color and act as radiation absorbing filter.
