The purpose of this procedure was to optimize and improve a method that used for the determination of arsenic （Ⅲ） and arsenic （Ⅴ） in biological and environmental samples. The method is based on hydride generatio...The purpose of this procedure was to optimize and improve a method that used for the determination of arsenic （Ⅲ） and arsenic （Ⅴ） in biological and environmental samples. The method is based on hydride generation and atomic absorption spectrometry. For both As （Ⅲ） and As （Ⅴ） the parameters such as NaBH4, HCI concentration, and pH were optimized. Absorption signal of As （Ⅴ） was approximately 17% of As （Ⅲ） signal. Therefore, for estimation of As （Ⅲ） and As （Ⅴ） concentrations in various samples the difference between the absorbance obtained for arsenic, without and with previous treatment of samples with potassium iodide （KI）, can be applied. The calibration graphs were linear （r〉0.99）, and the detection limits of the method based on three times the standard deviation of the blank were 0.14 and 0.64 μL^-1 for As （Ⅲ） and As （Ⅴ）, respectively. The relative standard deviation （R.S.D.） of measurements was less than 10%. As a means of checking performance method, water samples were spiked with known concentrations of both As （Ⅲ） and As （Ⅴ）, and recovery above 94% was obtained. The proposed method was applied successfully to determine inorganic As （Ⅲ） and As （Ⅴ） in various environmental and total As in biological samples.展开更多
文摘The purpose of this procedure was to optimize and improve a method that used for the determination of arsenic （Ⅲ） and arsenic （Ⅴ） in biological and environmental samples. The method is based on hydride generation and atomic absorption spectrometry. For both As （Ⅲ） and As （Ⅴ） the parameters such as NaBH4, HCI concentration, and pH were optimized. Absorption signal of As （Ⅴ） was approximately 17% of As （Ⅲ） signal. Therefore, for estimation of As （Ⅲ） and As （Ⅴ） concentrations in various samples the difference between the absorbance obtained for arsenic, without and with previous treatment of samples with potassium iodide （KI）, can be applied. The calibration graphs were linear （r〉0.99）, and the detection limits of the method based on three times the standard deviation of the blank were 0.14 and 0.64 μL^-1 for As （Ⅲ） and As （Ⅴ）, respectively. The relative standard deviation （R.S.D.） of measurements was less than 10%. As a means of checking performance method, water samples were spiked with known concentrations of both As （Ⅲ） and As （Ⅴ）, and recovery above 94% was obtained. The proposed method was applied successfully to determine inorganic As （Ⅲ） and As （Ⅴ） in various environmental and total As in biological samples.
