无线传感器网络在农业中的应用

无线传感器网络集传感器技术、微机电系统(M EM S)技术、无线通信技术、嵌入式计算技术和分布式信息处理技术于一体,是多学科高度交叉的、知识高度集中的热点研究领域,因其广阔的应用前景而备受关注。该文综述了无线传感器网络的节点构成、体系结构、研究热点,以及在农业中的应用研究现状,针对性地提出在温室、节水灌溉、畜牧等农业领域应用无线传感器网络的方案与思路,为无线传感器网络在农业中的应用拓宽思路,争取早日将无线传感器网络投入到农业应用领域。

Physical layer design of wireless sensor network nodes

Major consideration dimensions for the physical layer design of wireless sensor network （WSN） nodes is analyzed by comparing different wireless communication approaches, diverse mature standards, important radio frequency （RF） parameters and various microcontroller unit （MCU） solutions. An implementation of the WSN node is presented with experimental results and a novel ＂one processor working at two frequencies＂ energy saving strategy. The lifetime estimation issue is analyzed with consideration to the periodical listen required by common WSN media access control （MAC） algorithms. It can be concluded that the startup time of the RF which determines the best sleep time ratio and the shortest backoff slot time of MAC, the RF frequency and modulation methods which determinate the RX and TX current, and the overall energy consumption of the dual frequency MCU SOC （ system on chip） are the most essential factors for the WSN node physical layer design.

Monitoring System for Field Soil Water Content Based on the Wireless Sensor Network

[Objective] To water content monitoring study the application of wireless sensor network in field so and to discuss the methods for solving the problems of low sampling rate, high cost and poor real-time in actual monitoring. [Method] The architecture of wireless sensor network, network nodes, hardware design as well as principle for the program structure of software operating system and corresponding parameters were analyzed to illustrate the characteristics of monitoring system for field soil water content based on wireless sensor network, and the advantages in application of this system. [Result] Sensor nodes could correctly collect and transmit soil water content, realize stable data transmission of soil water content, indicating that wireless sensor network is suitable for real-time monitoring of field soil water content. [Conclusion] This study indicates that wireless sensor network possesses a widely application foreground in the development of agriculture.

Design and performance analysis of wireless sensor network location node system for underground mine

Aiming at the application of a wireless sensor network to locating miners in underground mine,we design a wireless sensor network location node system,considering the communication performance and the intrinsic safety. The location node system consists of a mobile node,several fixed nodes,and a sink node,all of whose circuits were designed based on CC2430. A varistor and a RC circuit were used in the reset circuit of a sensor node to guarantee the intrinsic safety by reducing discharge energy,the theoretical analysis of the discharge energy shows that the reset circuit is an intrinsic safety one. The analysis and simulation about the performance of the location node system are discussed,such as network communication delay and packet loss rate,the results show that the highest network communication delay of the system is about 0.11 seconds,and the highest packet loss rate is about 0.13,which assures the location node system has a high reliability,and can locate miners in the underground mine.

A load-balanced minimum energy routing algorithm for Wireless Ad Hoc Sensor Networks

Wireless Ad Hoc Sensor Networks (WSNs) have received considerable academia research attention at present. The energy-constraint sensor nodes in WSNs operate on limited batteries, so it is a very important issue to use energy efficiently and reduce power consumption. To maximize the network lifetime, it is essential to prolong each individual node’s lifetime through minimizing the transmission energy consumption, so that many minimum energy routing schemes for traditional mobile ad hoc network have been developed for this reason. This paper presents a novel minimum energy routing algorithm named Load-Balanced Minimum Energy Routing (LBMER) for WSNs considering both sensor nodes’ energy consumption status and the sensor nodes’ hierarchical congestion levels, which uses mixture of energy balance and traffic balance to solve the problem of “hot spots” of WSNs and avoid the situation of “hot spots” sensor nodes using their energy at much higher rate and die much faster than the other nodes. The path router established by LBMER will not be very congested and the traffic will be distributed evenly in the WSNs. Simulation results verified that the LBMER performance is better than that of Min-Hop routing and the existing minimum energy routing scheme MTPR (Total Transmission Power Routing).

Authentication masking code against DoS of T-MAC protocol

Security vulnerability of denial of service (DoS) in time out-medium access control (T-MAC) protocol was discussed and analysis of power consumption at each stage of T-MAC protocol was carried out. For power efficient authentication scheme which can provide reliability, efficiency, and security for a general T-MAC communication, a novel synchronization and authentication scheme using authentication masking code was proposed. Authentication data were repeated and masked by PN sequence. The simulation results show that the proposed approach can provide synchronization and authentication simultaneously for nodes in wireless sensor network (WSN). 63 bits AMC code gives above 99.97% synchronization detection and 93.98% authentication data detection probability in BER 0.031 7.

A Method for Node Fault Detection in Wireless Sensor Networks

To reduce excessive computing and communication loads of traditional fault detection methods,a neighbor-data analysis based node fault detection method is proposed.First,historical data is analyzed to confirm the confidence level of sensor nodes.Then a node's reading data is compared with neighbor nodes' which are of good confidence level.Decision can be made whether this node is a failure or not.Simulation shows this method has good effect on fault detection accuracy and transient fault tolerance,and never transfers communication and computing overloading to sensor nodes.

Enabling Energy Efficient Sensory Data Collection Using Multiple Mobile Sink

Mobile sink is the challenging task for wireless sensor networks(WSNs).In this paper we propose to design an efficient routing protocol for single mobile sink and multiple mobile sink for data gathering in WSN.In this process,a biased random walk method is used to determine the next position of the sink.Then,a rendezvous point selection with splitting tree technique is used to find the optimal data transmission path.If the sink moves within the range of the rendezvous point,it receives the gathered data and if moved out,it selects a relay node from its neighbours to relay packets from rendezvous point to the sink.Proposed algorithm reduces the signal overhead and improves the triangular routing problem.Here the sink acts as a vehicle and collect the data from the sensor.The results show that the proposed model effectively supports sink mobility with low overhead and delay when compared with Intelligent Agent-based Routing protocol(IAR) and also increases the reliability and delivery ratio when the number of sources increases.

Transmission performance of 2.4 GHz wireless sensor nodes when used in a working-face environment

Wireless sensor nodes have the advantage of being low-cost,easily deployed and of good mobility.If deployed in an underground mine with existing underground transmission systems a wireless sensor network can improve the collection of information.To get good transmission performance for 2.4 GHz wireless sensor nodes at the working face we calculated the reflection properties of electromagnetic waves from a flat metal plate.Using the cascade impedance method(CIM),we studied transmission attenuation and compared the results to actual tests.The results show that the effective transmission distance of 2.4 GHz wireless sensor nodes meets the stipulations of the ZigBee protocol.

A sink moving scheme based on local residual energy of nodes in wireless sensor networks

In the application of periodic data-gathering in sensor networks,sensor nodes located near the sink have to forward the data received from all other nodes to the sink,which depletes their energy very quickly.A moving scheme for the sink based on local residual energy was proposed.In the scheme,the sink periodically moves to a new location with the highest stay-value defined by the average residual energy and the number of neighbors.The scheme can balance energy consumption and prevent nodes around sink from draining their energy very quickly in the networks.The simulation results show that the scheme can prolong the network lifetime by 26%-65%compared with the earlier schemes where the sink is static or moves randomly.

Node deployment strategy optimization for wireless sensor network with mobile base station

The optimization of network performance in a movement-assisted data gathering scheme was studied by analyzing the energy consumption of wireless sensor network with node uniform distribution. A theoretically analytical method for avoiding energy hole was proposed. It is proved that if the densities of sensor nodes working at the same time are alternate between dormancy and work with non-uniform node distribution. The efficiency of network can increase by several times and the residual energy of network is nearly zero when the network lifetime ends.

Distributed Connectivity Restoration Strategy for Movable Sensor Networks

Failure of one or multiple critical nodes may partition wireless sensor networks into disjoint segments, and thus brings negative effect on the applications. We propose DCRS, a Distributed Connectivity Restoration Strategy to tolerate the failure of one critical node. Because of the energy restriction of sensor nodes, the energy overhead of the recovery process should be minimized to extend the lifetime of the network. To achieve it, we first design a novel algorithm to identify 2-critical nodes only relying on the positional information of 1-hop neighbors and some 2-hop neighbors, and then we present the criteria to select an appropriate backup for each critical node. Finally, we improve the cascaded node movement algorithm by determining whether a node can move to another non-adjacent node directly or not to reduce the number of nodes moved. The effectiveness of DCRS is validated through extensive simulation experiments.

Node scattering manipulation based on trajectory model in wireless sensor network

To deploy sensor nodes over the area of interest,a scheme,named node scattering manipulation,was proposed.It adopted the following method:during node scattering,the initial states of every node,including the velocity and direction,were manipulated so that it would land in a region with a certain probability;every sensor was relocated in order to improve the coverage and connectivity.Simultaneously,to easily analyze the process of scattering sensors,a trajectory model was also proposed.Integrating node scattering manipulation with trajectory model,the node deployment in wireless sensor network was thoroughly renovated,that is,this scheme can scatter sensors.In practice,the scheme was operable compared with the previous achievements.The simulation results demonstrate the superiority and feasibility of the scheme,and also show that the energy consumption for sensors relocation is reduced.

A Low-Overhead Energy-Efficient ARQ Protocol for Wireless Sensor Networks

Wireless sensor network(WSN) is a typical kind of low-power and lossy network,in where ARQ(Automatic Repeat reQuest)schemes are often used to improve packets reliability.However,the ARQ related packets may incur significant load and consume more energy.This paper proposes a novel energy efficient ARQ protocol called ARQ+,which uses the nearest-first scheme and NAK aggregation scheme to reduce the amount and transmission hops of the ARQ related packets.Consequently,the energy consumption is significantly decreased.Theoretical analyses of ARQ+ on energy consumption,packet arrive ratio and latency are provided.Performance improvement of ARQ+ is validated by extensive simulations.They both show that ARQ+ has satisfactory energy efficiency,good packets arriving ratio and reasonable average packet delay comparing to traditional ARQ schemes.

A New Network Coding Mechanism Balancing Coding Opportunities, Energy and QoS in WSNs

A new Network Coding mechanism in WSNs(Wireless Sensor Networks), which is named COEQ and aims at balancing coding opportunities, energy and QoS, is proposed and analyzed. Implemented on the basis of traditional AODV protocol, COEQ evaluates several metrics of paths comprehensively with TOPSIS method including minimum remaining energy, coding opportunities, QoS and so on, so as to select the optimal transmitting route. Experiments on NS[2] show that COEQ can improve throughput and save energy when the transmitting rate is low.

A Sensor Anonymity Enhancement Scheme Based on Pseudonym for Clustered Wireless Sensor Network

Security problem is an important issue for Wireless Sensor Network.The paper focuses on the privacy protection of WSN applications.An anonymity enhancement tactic based on pseudonym mechanism is presented for clustered Wireless Sensor Network,which provides anonymity for both the sensors within a cluster and the cluster head nodes.Simulation experiments are launched through NS2 platform to validate the anonymity performance.The theoretical analysis and empirical study imply that the proposed scheme based on pseudonym can protect the privacies of both the sensor nodes and the cluster head nodes.The work is valuable and the experimental results are convincible.

The Design of Wireless Sensor Network System based on ZigBee Technology

The paper design hardware platform based on network node, and analyze ZigBee protocol architecture and standards of each layer; on based of ZigBee protocol stack, we design the application program of network coordinator and terminal node to realize the data acquisition; design of network system has the characteristics of low cost, small volume, test results show that the mesh topology, network support, can be rapidly deployed, temperature, humidity, light intensity information of the smooth reading environment, that can be used for domestic environmental monitoring field.

Node cooperation based location secure verification algorithm in wireless sensor networks localization

For the application of wireless sensor networks in the military field, one of the main challenges is security. To solve the problem of verifying the location claim for a node, a new location verifica- tion algorithm called node cooperation based location secure verification （NCBLSV） algorithm is proposed. NCBLSV could verify malicious nodes by contrasting neighbor nodes and nodes under beam width angle using an adaptive array antenna at a base point. Simulation experiments are con- ducted to evaluate the performance of this algorithm by varying the communication range and the an- tenna beam width angle. Results show that NCBLSV algorithm has high probability of successful ma- licious nodes detection and low probability of false nodes detection. Thus, it is proved that the NCBLSV algorithm is useful and necessary in the wireless sensor networks security.

DEFENSE AGAINST COLLUSION SCHEME BASED ON ELLIPTIC CURVE CRYPTOGRAPHY FOR WIRELESS SENSOR NETWORKS

Wireless Sensor Networks (WSNs) are being deployed for a wide variety of applications and the security problems of them have received considerable attention. Considering the limitations of power, computation capability and storage resources, this paper proposed an efficient defense against collusion scheme based on elliptic curve cryptography for wireless sensor networks in order to solve the problems that sensor node-key leaking and adversaries make compromised nodes as their collusions to launch new attack. In the proposed scheme, the group-key distribution strategy is employed to compute the private key of each sensor node, and the encryption and decryption algorithms are constructed based on Elliptic Curve Cryptography (ECC). The command center (node) only needs to broadcast a controlling header with three group elements, and the authorized sensor node can correctly recover the session key and use it to decrypt the broadcasting message. Analysis and proof of the proposed scheme's efficiency and security show that the proposed scheme can resist the k-collusion attack efficiently.

An Iterative Clustering-Based Localization Algorithm for Wireless Sensor Networks

In wireless sensor networks,node localization is a fundamental middleware service.In this paper,a robust and accurate localization algorithm is proposed,which uses a novel iterative clustering model to obtain the most representative intersection points between every two circles and use them to estimate the position of unknown nodes.Simulation results demonstrate that the proposed algorithm outperforms other localization schemes (such as Min-Max,etc.) in accuracy,scalability and gross error tolerance.