基于时分处理的FIR内插滤波器的设计与实现

本文从设计原理和硬件结构两个方面对FIR内插滤波器的设计与实现方法进行了分析。以降低硬件开销和提高处理速度为目标 ,提出了基于子滤波器时分处理的多相滤波器设计方法 ,并针对具体器件就算法的实现进行了讨论。最后 。

High-SpeedReal-TimeDataAcquisitionSystem Realized by Interleaving/Multiplexing Technique

The interleaving/multiplexing technique was used to realize a 200?MHz real time data acquisition system. Two 100?MHz ADC modules worked parallelly and every ADC plays out data in ping pang fashion. The design improved the system conversion rata to 200?MHz and reduced the speed of data transporting and storing to 50?MHz. The high speed HDPLD and ECL logic parts were used to control system timing and the memory address. The multi layer print board and the shield were used to decrease interference produced by the high speed circuit. The system timing was designed carefully. The interleaving/multiplexing technique could improve the system conversion rata greatly while reducing the speed of external digital interfaces greatly. The design resolved the difficulties in high speed system effectively. The experiment proved the data acquisition system is stable and accurate.

Fractional S transform-Part 1:Theory

The S transform, which is a time-frequency representation known for its local spectral phase properties in signal processing, uniquely combines elements of wavelet transforms and the short-time Fourier transform （STFT）. The fractional Fourier transform is a tool for non-stationary signal analysis. In this paper, we define the concept of the fractional S transform （FRST） of a signal, based on the idea of the fractional Fourier transform （FRFT） and S transform （ST）, extend the S transform to the time-fractional frequency domain from the time- frequency domain to obtain the inverse transform, and study the FRST mathematical properties. The FRST, which has the advantages of FRFT and ST, can enhance the ST flexibility to process signals. Compared to the S transform, the FRST can effectively improve the signal time- frequency resolution capacity. Simulation results show that the proposed method is effective.

基于小波消噪的EMD模型在GPS振动信号处理中的应用

经验模式分解和小波分解是当前有效处理非平稳信号的两种时频分析方法,它们各具有其优缺点,适用于不同的应用。从对GPS振动信号的预处理、时域和频域处理入手,结果分析表明,对GPS振动信号先进行小波滤波消除随机噪声的干扰,再应用经验模式分解更有利于变形特征信息的分离和提取,提取的信号与振动平台记录数据更加吻合。

Improvement of the Mirror Extending in Empirical Mode Decomposition Method and the Technology for Eliminating Frequency Mixing

The mirror extending approach proposed by Zhao and Huang in EMD method is improved in this paper. Mirror extending manner of data is kept unchanged, but the approach for determining envelopes is changed. When the end of data is obviously not extremum, the envelope is determined by the first inner extremum and the image value in the mirror, ignoring the value on the end. This improvement eliminates the frequency compression near the end and decreases the error. Meanwhile, tridiagonal equations are used and the calculation speed is much increased. The temporal process curve is more important in reflecting the real physical process and comparable with other phenomena. Frequency mixing in IMFs makes it impossible. A high frequency reconstruction (HFR) approach is proposed to eliminate common frequency mixing and reconstruct an IMF with all high frequency portions. By this approach, the IMFs without frequency mixing are obtained to express significative processes. The high frequency information restored in high frequency IMF can be extracted by general spectrum method. After obtaining IMFs by EMD method, some of the theoretical and technological issues still exist when using the IMFs. The consistency of IMFs with real physical process is discussed in detail. By virtue of the approach proposed in this paper, the EMD method can be widely used in various fields.

Age-hardening behavior and microstructure of Cu-15Ni-8Sn-0.3Nb alloy prepared by powder metallurgy and hot extrusion

Cu-15Ni-8Sn-0.3Nb alloy rods were prepared by means of powder metallurgy followed by hot extrusion.Element maps obtained by electron probe micro analyzer(EPMA)showed that Nb-rich phases were formed and distributed within grains and at grain boundaries of the Cu-15Ni-8Sn-0.3Nb alloy.Transmission electron microscope(TEM)results indicated that there was no obvious orientation relationship between these phases and the matrix.Spinodal decomposition and ordering transformation appeared at early stages of aging at400°C and caused significant strengthening.Cu-15Ni-8Sn-0.3Nb alloy exhibited both higher strength(ultimate tensile strength>1030MPa)and higher tensile ductility(elongation>9.1%)than Cu-15Ni-8Sn alloy after aging treatment.The improvement was caused by Nb-rich phases at grain boundaries which led o the refinement of grain size and postponed the growth of discontinuous precipitates during aging.

Influence of deformation and heat treatment on electrical conductivity of CuMoCr alloy

The solution heat treatment,cold deformation and subsequent aging were performed on CuMoCr alloy.And the influence of deformation and aging treatment on the electrical conductivity of CuMoCr alloy was studied through metallograph,transmission electron microscopy(TEM) and electrical conductivity measurement.Results show that deformation without subsequent aging can reduce the electrical conductivity of CuMoCr alloy,but deformation followed by the optimum aging treatment can effectively improve the electrical conductivity of CuMoCr alloy.Aging at 500 ℃ for 4 h after 80% deformation,the much better electrical conductivity of CuMoCr alloy can be obtained.Reduction of Cr content in the Cu matrix could be the reason for the enhancement of electrical conductivity.

Enhanced strengthening by two-step progressive solution and aging treatment in AM50-4%(Zn,Y) magnesium alloy

AM50-4%(Zn,Y)alloy with a Zn/Y mole ratio of6:1was subjected to thermal analysis,and the results were used for designing a two-step progressive solution treatment process.The effects of solution and aging treatments on the microstructure and mechanical properties of the AM50-4%(Zn,Y)alloy were investigated using OM,XRD,SEM/EDS,TEM,tensile test and hardness test.The experimental results demonstrated that the two-step progressive solution treatment could make theΦandβphases sufficiently dissolve into the matrix which possessed higher supersaturated degree of the dissolved solute compared with the one-step solution treatment.This resulted in a certain enhancement of the precipitation strengthening effect during the subsequent aging process.The precipitation of theФphase had a greater impact on the comprehensive mechanical properties of the alloy thanβphase precipitation when the aging treatment was performed at180℃.The peak aging strength of the AM50-4%(Zn,Y)alloy which was subjected to the two-step progressive solution treatment process(345℃for16h and375℃for6h)was obtained after the aging treatment at180℃for12h.

Algorithms for semi on-line multiprocessor scheduling problems

In the classical multiprocessor scheduling problems, it is assumed that the problems are considered in off\|line or on\|line environment. But in practice, problems are often not really off\|line or on\|line but somehow in between. This means that, with respect to the on\|line problem, some further information about the tasks is available, which allows the improvement of the performance of the best possible algorithms. Problems of this class are called semi on\|line ones. The authors studied two semi on\|line multiprocessor scheduling problems, in which, the total processing time of all tasks is known in advance, or all processing times lie in a given interval. They proposed approximation algorithms for minimizing the makespan and analyzed their performance guarantee. The algorithms improve the known results for 3 or more processor cases in the literature.

准噶尔盆地腹部石南地区侏罗系薄砂体识别方法研究

准噶尔盆地腹部石南地区侏罗系头屯河组(J2t)与三工河组(J1s)薄砂层是主要油气高产层系之一,但目前地震资料难以刻画岩性圈闭,为此,应用基于地质目标分时分频迭代处理解释一体化技术,针对石南地区薄砂体储层特征建立处理和解释之间相互渗透、迭代递进的研究模式,开展岩性圈闭预测和目标评价工作。首次准确识别了准噶尔盆地腹部J2t砂体尖灭线,验证了“古隆控砂”成藏模式;发现了一系列构造岩性圈闭,新部署实施的石603井J2t获日产34.9 t高产油流,新增探明储量301.22 ×104 t;新部署实施的石607井J1s21获日产5.67 ×104 m3高产工业气流,预测天然气地质储量30.97 ×108 m3,为准噶尔盆地腹部侏罗系下一步滚动勘探开发开拓了新领域。

A new approach for real time object detection and tracking on high resolution and multi-camera surveillance videos using GPU

High resolution cameras and multi camera systems are being used in areas of video surveillance like security of public places, traffic monitoring, and military and satellite imaging. This leads to a demand for computational algorithms for real time processing of high resolution videos. Motion detection and background separation play a vital role in capturing the object of interest in surveillance videos, but as we move towards high resolution cameras, the time-complexity of the algorithm increases and thus fails to be a part of real time systems. Parallel architecture provides a surpass platform to work efficiently with complex algorithmic solutions. In this work, a method was proposed for identifying the moving objects perfectly in the videos using adaptive background making, motion detection and object estimation. The pre-processing part includes an adaptive block background making model and a dynamically adaptive thresholding technique to estimate the moving objects. The post processing includes a competent parallel connected component labelling algorithm to estimate perfectly the objects of interest. New parallel processing strategies are developed on each stage of the algorithm to reduce the time-complexity of the system. This algorithm has achieved a average speedup of 12.26 times for lower resolution video frames(320×240, 720×480, 1024×768) and 7.30 times for higher resolution video frames(1360×768, 1920×1080, 2560×1440) on GPU, which is superior to CPU processing. Also, this algorithm was tested by changing the number of threads in a thread block and the minimum execution time has been achieved for 16×16 thread block. And this algorithm was tested on a night sequence where the amount of light in the scene is very less and still the algorithm has given a significant speedup and accuracy in determining the object.

Combined GPS/GLONASS Data Processing

To obtain the GLONASS satellite position at an epoch other than reference time,the satellite’s equation of motion has to be integrated with broadcasting ephemerides.The iterative detecting and repairing method of cycle slips based on triple difference residuals for combined GPS/GLONASS positioning and the iterative ambiguity resolution approach suitable for combined post processing positioning are discussed systematically.Experiments show that millimeter accuracy can be achieved in short baselines with a few hours’ dual frequency or even single frequency GPS/GLONASS carrier phase observations,and the precision of dual frequency observations is distinctly higher than that of single frequency observations.

Neural Mechanism in Emotion Regulation by Simultaneous Recording of EEG and fMRI

The combination of electroencephalogram (EEG) and functional magnetic resonance imaging(fMRI) is a very attractive aim in neuroscience in order to achieve both high temporal and spatial resolution for the non-invasive study of cognitive brain function. In this paper, we record simultaneous EEG-fMRI of the same subject in emotional processing experiment in order to explore the characteristics of different emotional picture processing, and try to find the difference of the subjects' brain hemisphere while viewing different valence emotional pictures. The late positive potential(LPP) is a reliable electrophysiological index of emotional perception in humans. According to the analysis results, the slow-wave LPP and visual cortical blood oxygen level-dependent (BOLD) signals are both modulated by the rated intensity of picture arousal. The amplitude of the LPP correlate significantly with BOLD intensity in visual cortex, amygdala, temporal area, prefrontal and central areas across picture contents.

多小区一致性测试平台的研究与验证

TD-LTE(time division-long term evolution)无线资源管理一致性测试是检验TD-LTE终端是否符合协议标准的重要手段。鉴于传统一致性测试平台存在不足之处,无线资源管理一致性测试搭建了基于TTCN-3(testing and test control notation version 3)的一致性测试平台,并分析了该测试平台相对于传统测试平台的优越性。利用TTCN-3软件编写测试例并进行测试。通过分析测试流程图可以得出,一致性测试平台的可行性,并验证了该平台相对于传统平台的优越性。

EFFECTIVE NETWORKS FOR REAL-TIME DISTRIBUTED PROCESSING

This paper applies the concepts and methods of complex networks to the development of models and simulations of master-slave distributed real-time systems by introducing an upper bound in the allowable delivery time of the packets with computation results. Two representative intercom nection models are taken into account： Uniformly random and scale free （Barabasi-Albert）, including the presence of background traffic of packets. The obtained results include the identification of the uniformly random interconnectivity scheme as being largely more efficient than the scale-free counterpart. Also, increased latency tolerance of the application provides no help under congestion.