微扰法时域求解时变电导产生GHz电磁波脉冲研究

提出将微扰法应用在GHz、THz时域脉冲研究中.先求出无微扰时的时域场分布,然后求该时域场同时变电导相作用产生的扰动场,把扰动场加到无微扰下的时域场上,就得到了微扰下的场分布。利用电磁场时域差分方法对所研究问题进行了计算,并进行了实验验证,研究表明,理论结果和数值及实验结果相吻合。

Delineation of Site-Specific Management Zones Based on Temporal and Spatial Variability of Soil Electrical Conductivity

A coastal saline field of 10.5 ha was selected as the study site and 122 bulk electrical conductivity (ECb) measurements were performed thrice in situ in the topsoil (0-20 cm) across the field using a hand held device to assess the spatial variability and temporal stability of the distribution of soil electrical conductivity (EC), to identify the management zones using cluster analysis based on the spatiotemporal variability of soil EC, and to evaluate the probable potential for site-specific management in coastal regions with conventional statistics and geostatistical techniques. The results indicated high coefficients of variation for topsoil salinity over all the three samplings. The spatial structure of the salinity variability remained relatively stable with time. Kriged contour maps, drawn on the basis of spatial variance structure of the data, showed the spatial trend of the salinity distribution and revealed areas of consistently high or consistently low salinity, while a temporal stability map indicated stable and unstable regions. On the basis of the spatiotemporal characteristics, cluster analysis divided the site into three potential management zones, each with different characteristics that could have an impact on the way the field was managed. On the basis of the clearly defined management zones it was concluded that coastal saline land could be managed in a site-specific way.

Creep aging behavior of retrogression and re-aged 7150 aluminum alloy

Creep aging behavior of retrogression and re-aged(RRAed)7150 aluminum alloy(AA7150)was systematically investigated using the creep aging experiments,mechanical properties tests,electrical conductivity tests and transmission electron microscope(TEM)observations.Creep aging results show that the steady-state creep mechanism of RRAed alloys is mainly dislocation climb(stress exponent≈5.8),which is insensitive to the grain interior and boundary precipitates.However,the total creep deformation increases over the re-aging time.In addition,the yield strength and tensile strength of the four RRAed samples are essentially the same after creep aging at 140℃ for 16 h,but the elongation decreases slightly with the re-aging time.What’s more,the retrogression and re-aging treatment are beneficial to increase the hardness and electrical conductivity of the creep-aged 7150 aluminum alloy.It can be concluded that the retrogression and re-aging treatment before creep aging forming process can improve the microstructure within grain and at grain boundary,forming efficiency and comprehensive performance of mechanical properties and electrical conductivity of 7150 aluminum alloy.

Regularity and mechanism of coal resistivity response with different conductive characteristics in complete stress-strain process

The stress,strain as well as resistivity of coal during uniaxial compression process were tested based on self-built real-time testing system of loaded coal resistivity.Furthermore,the coal resistivity regularity and mechanism were analyzed at different stages of complete stress-strain process,which includes the two kinds of coal body with typical conductive characteristics.The results indicate that coal resistivity with different conductive characteristics has different change rules in complete stress-strain process.It is mainly represented at the densification and flexibility phases before dilatation occurs.The variation of resistivity can be divided into two kinds,named down and up.Dilatation of coal samples occurred between 66%σ_(max) and 87%σ_(max).Because of dilatation,coal resistivity involves sudden change.The overall representation is shifting from reducing into improving or from slow improving into accelerated improving.Thus,coal resistivity always shows an increasing tendency at the plastic stage.After peak stress,coal body enters into failure stage.The expanding and communicating of macro fracture causes further improvement of coal resistivity.The maximum value of resistivity rangeability named λ reached 3.49.Through making real-time monitoring on coal resistivity,variation rules of resistivity can be deemed as precursory information so as to reflect the dilatation and sudden change before coal body reaches buckling failure,which can provide a new technological means for forecasting the dynamic disaster of coal petrography.

Development characteristics of cloud-to-ground lightning with multiple grounding points

Using the optical images of a cloud-to-ground lightning flash with multiple grounding points obtained by a highspeed video system in the Qinghai Province of China along with synchronous radiated electric field information, the propagation characteristic and the electric field change features of the leaders and the grounding behavior of discharge channels are analyzed.In addition, the two-dimensional velocity of the leader was estimated and its correlation with the time interval of the corresponding subsequent return stroke, and that with the peak current of return stroke are investigated. The results show that the average distance between the three obvious grounded points of the first return stroke channel is about 512.7 m, and the average time interval between the pulses of the corresponding electric field fast changes is 3.8 μs. Further, the average time interval between electric field pulses from the stepped leader is smaller than that of normal single grounding lightning. The observed lightning in our study has two main channels, namely the left and right channels. Based on our observations, it is clear that the dart leader comes close to the ground in case of the left channel after the first return stroke, but it fails to form a return stroke.However, the right channel exhibits a relatively rare phenomenon in that the subsequent return stroke R2 occurred about 2.1 ms after the dart leader arrived at the ground, which was unusually long; this phenomenon might be attributed to the strong discharge of the first return stroke and insufficient charge accumulation near the grounded point in a timely manner. The two-dimensional velocities for the stepped leader of the two main channels are about 1.23×105 and 1.16×105 m s-1, respectively. A sub-branch of stepped leader for the left channel fails to reach the ground and develops into an attempt leader eventually; this might be attributed to the fact that the main branch connects considerably many sub-branches, which leads to the instantaneous decline of the potential difference between the sub-branch and ground. Furthermore, it might also be because the propagation direction of this sub-branch is almost perpendicular to the atmospheric electric field direction, which is not conducive to charge transfer. The two-dimensional velocities for the dart leaders of five subsequent return strokes are all in the normal range, and they positively correlate with the peak current of the subsequent return stroke.