The dynamic monitoring of landslides in engineering geology has focused on the correlation among landslide stability,rainwater infiltration,and subsurface hydrogeology.However,the understanding of this complicated cor...The dynamic monitoring of landslides in engineering geology has focused on the correlation among landslide stability,rainwater infiltration,and subsurface hydrogeology.However,the understanding of this complicated correlation is still poor and inadequate.Thus,in this study,we investigated a typical landslide in southwestern China via time-lapse electrical resistivity tomography（TLERT） in November 2013 and August 2014.We studied landslide mechanisms based on the spatiotemporal characteristics of surface water infiltration and flow within the landslide body.Combined with borehole data,inverted resistivity models accurately defined the interface between Quaternary sediments and bedrock.Preferential flow pathways attributed to fracture zones and fissures were also delineated.In addition,we found that surface water permeates through these pathways into the slipping mass and drains away as fissure water in the fractured bedrock,probably causing the weakly weathered layer to gradually soften and erode,eventually leading to a landslide.Clearly,TLERT dynamic monitoring can provide precursory information of critical sliding and can be used in landslide stability analysis and prediction.展开更多
Monitoring and delineating the spatial distribution of shale fracturing is fundamentally important to shale gas production. Standard monitoring methods, such as time-lapse seismic, cross-well seismic and micro-seismic...Monitoring and delineating the spatial distribution of shale fracturing is fundamentally important to shale gas production. Standard monitoring methods, such as time-lapse seismic, cross-well seismic and micro-seismic methods, are expensive, time- consuming, and do not show the changes in the formation with time. The resistivities of hydraulic fracturing fluid and reservoir rocks were measured. The results suggest that the injection fluid and consequently the injected reservoir are characterized by very low resistivity and high chargeability. This allows using of the controlled-source electromagnetic method （CSEM） to monitor shale gas hydraulic fracturing. Based on the geoelectrical model which was proposed according to the well-log and seismic data in the test area the change rule of the reacted electrical field was studied to account for the change of shale resistivity, and then the normalized residual resistivity method for time lapse processing was given. The time-domain electromagnetic method （TDEM） was used to continuously monitor the shale gas fracturing at the Fulin shale gas field in southern China. A high-power transmitter and multi-channel transient electromagnetic receiver array were adopted. 9 h time series of Ex component of 224 sites which were laid out on the surface and over three fracturing stages of a horizontal well at 2800 m depth was recorded. After data processing and calculation of the normalized resistivity residuals, the changes in the Ex signal were determined and a dynamic 3D image of the change in resistivity was constructed. This allows modeling the spatial distribution of the fracturing fluid. The model results suggest that TDEM is promising for monitoring hydraulic fracturing of shale.展开更多
The high-frequency electromagnetic waves of ground-penetrating radar(GPR)attenuate severely when propagated in an underground attenuating medium owing to the influence of resistivity,which remarkably decreases the res...The high-frequency electromagnetic waves of ground-penetrating radar(GPR)attenuate severely when propagated in an underground attenuating medium owing to the influence of resistivity,which remarkably decreases the resolution of reverse time migration(RTM).As an effective high-resolution imaging method,attenuation-compensated RTM(ACRTM)can eff ectively compensate for the energy loss caused by the attenuation related to media absorption under the influence of resistivity.Therefore,constructing an accurate resistivity-media model to compensate for the attenuation of electromagnetic wave energy is crucial for realizing the ACRTM imaging of GPR data.This study proposes a resistivity-constrained ACRTM imaging method for the imaging of GPR data by adding high-density resistivity detection along the GPR survey line and combining it with its resistivity inversion profile.The proposed method uses the inversion result of apparent resistivity data as the GPR RTM-resistivity model for imposing resistivity constraints.Moreover,the hybrid method involving image minimum entropy and RTM is used to estimate the medium velocity at the diff raction position,and combined with the distribution characteristics of the reflection in the GPR profile,a highly accurate velocity model is built to improve the imaging resolution of the ACRTM.The accuracy and eff ectiveness of the proposed method are verified using the ACRTM test of the GPR simulated data of a typical attenuating media model.On this basis,the GPR and apparent resistivity data were observed on a field survey line,and use the GPR resistivity-constrained ACRTM method to image the observed data.A comparison of the proposed method with the conventional ACRTM method shows that the proposed method has better imaging depth,stronger energy,and higher resolution,and the obtained results are more conducive for subsequent data analysis and interpretation.展开更多
基金funded by the National Basic Research Program of China(973 Program)(No.2013CB733203)the National Natural Science Foundation of China(No.41474055)
文摘The dynamic monitoring of landslides in engineering geology has focused on the correlation among landslide stability,rainwater infiltration,and subsurface hydrogeology.However,the understanding of this complicated correlation is still poor and inadequate.Thus,in this study,we investigated a typical landslide in southwestern China via time-lapse electrical resistivity tomography（TLERT） in November 2013 and August 2014.We studied landslide mechanisms based on the spatiotemporal characteristics of surface water infiltration and flow within the landslide body.Combined with borehole data,inverted resistivity models accurately defined the interface between Quaternary sediments and bedrock.Preferential flow pathways attributed to fracture zones and fissures were also delineated.In addition,we found that surface water permeates through these pathways into the slipping mass and drains away as fissure water in the fractured bedrock,probably causing the weakly weathered layer to gradually soften and erode,eventually leading to a landslide.Clearly,TLERT dynamic monitoring can provide precursory information of critical sliding and can be used in landslide stability analysis and prediction.
基金supported by NSFC(Grant No.U1562109 and 41774082)the National Major Research Plan(Grant No.2016YFC0601100and 2016ZX05004)the Project of Scientific Research and Technological Development,CNPC(Grant No.2017D-5006-16)
文摘Monitoring and delineating the spatial distribution of shale fracturing is fundamentally important to shale gas production. Standard monitoring methods, such as time-lapse seismic, cross-well seismic and micro-seismic methods, are expensive, time- consuming, and do not show the changes in the formation with time. The resistivities of hydraulic fracturing fluid and reservoir rocks were measured. The results suggest that the injection fluid and consequently the injected reservoir are characterized by very low resistivity and high chargeability. This allows using of the controlled-source electromagnetic method （CSEM） to monitor shale gas hydraulic fracturing. Based on the geoelectrical model which was proposed according to the well-log and seismic data in the test area the change rule of the reacted electrical field was studied to account for the change of shale resistivity, and then the normalized residual resistivity method for time lapse processing was given. The time-domain electromagnetic method （TDEM） was used to continuously monitor the shale gas fracturing at the Fulin shale gas field in southern China. A high-power transmitter and multi-channel transient electromagnetic receiver array were adopted. 9 h time series of Ex component of 224 sites which were laid out on the surface and over three fracturing stages of a horizontal well at 2800 m depth was recorded. After data processing and calculation of the normalized resistivity residuals, the changes in the Ex signal were determined and a dynamic 3D image of the change in resistivity was constructed. This allows modeling the spatial distribution of the fracturing fluid. The model results suggest that TDEM is promising for monitoring hydraulic fracturing of shale.
基金supported by the National Natural Science Foundation of China (No.41604102)the Guangxi Natural Science Foundation project (No.2020GXNSFAA159121).
文摘The high-frequency electromagnetic waves of ground-penetrating radar(GPR)attenuate severely when propagated in an underground attenuating medium owing to the influence of resistivity,which remarkably decreases the resolution of reverse time migration(RTM).As an effective high-resolution imaging method,attenuation-compensated RTM(ACRTM)can eff ectively compensate for the energy loss caused by the attenuation related to media absorption under the influence of resistivity.Therefore,constructing an accurate resistivity-media model to compensate for the attenuation of electromagnetic wave energy is crucial for realizing the ACRTM imaging of GPR data.This study proposes a resistivity-constrained ACRTM imaging method for the imaging of GPR data by adding high-density resistivity detection along the GPR survey line and combining it with its resistivity inversion profile.The proposed method uses the inversion result of apparent resistivity data as the GPR RTM-resistivity model for imposing resistivity constraints.Moreover,the hybrid method involving image minimum entropy and RTM is used to estimate the medium velocity at the diff raction position,and combined with the distribution characteristics of the reflection in the GPR profile,a highly accurate velocity model is built to improve the imaging resolution of the ACRTM.The accuracy and eff ectiveness of the proposed method are verified using the ACRTM test of the GPR simulated data of a typical attenuating media model.On this basis,the GPR and apparent resistivity data were observed on a field survey line,and use the GPR resistivity-constrained ACRTM method to image the observed data.A comparison of the proposed method with the conventional ACRTM method shows that the proposed method has better imaging depth,stronger energy,and higher resolution,and the obtained results are more conducive for subsequent data analysis and interpretation.
