Various shaped mafic microgranular enclaves (MMEs) together with several mafic massifs are developed within the Yuegelu granitoid pluton in the eastern part of the Eastern Kunlun. On the basis of detailed field geolog...Various shaped mafic microgranular enclaves (MMEs) together with several mafic massifs are developed within the Yuegelu granitoid pluton in the eastern part of the Eastern Kunlun. On the basis of detailed field geological surveying and of the results of the petrological and geo-chemical studies it is suggested that there must be some ge-netic relationship among the granodiorite host, the MMEs and the hornblende (Hb)-gabbro massifs. Magmatic zircon grains are extracted from samples of granodiorite host rock, Hb-gabbro and the MMEs for U-Pb dating. The U-Pb ages are determined by using SHRIMP Ⅱ technique, which yields the ages of 242±6 Ma, 239±6 Ma and 241±5 Ma, respectively. The overall correspondence in the U-Pb dating results of them excludes the possibility that the MMEs in the granitoids are solid refractory relics from the source region or that they are xenoliths from the wall rocks. It can also rule out the possibility of a later emplacement of basic magma after the solidification of the granitoids. This dating result indicates that they are the products of magma mixing in early-mid Triassic epoch. Among them the granitoid host is chemically akin to the acidic end member during the magma mixing process, the Hb-gabbro is akin to the basic ones while the MMEs are the incompletely mixed basic magma clots trapped in the acidic magma. Combined with the results from other researches on this pluton it is reasonable to con-sider that in the mid-Triassic the Eastern Kunlun granitoid belt had undergone a process of magma mixing between the mantle-derived basic magma and the crustal acidic magma which indicates that the injection of mantle materials and energy into the crust and the reactions between them played an important role in the formation of the granitoid rocks.展开更多
The Kunlun Fault, an active fault on the border between the Bayan Har and Kunlun-Qaidam blocks, is one of the major left lateral strike-slip faults in the Tibetan Plateau. Previous research has not reached a consensus...The Kunlun Fault, an active fault on the border between the Bayan Har and Kunlun-Qaidam blocks, is one of the major left lateral strike-slip faults in the Tibetan Plateau. Previous research has not reached a consensus on agreeable slip rates along much of its length and the slip rate gradient along the eastern part, both of which play critical roles in a range of models for the eastward extrusion and thickened crust of the Tibetan Plateau. New slip rates have been determined at sites along the eastern part of the Kunlun Fault by dating deposits and measuring atop displaced fluvial terrace risers. Field investigations and interpretation of satellite images reveal geometrical features of the fault and the late Quaternary offset, new earthquake ruptures and surface-rupturing segmentation, from which long-term slip rates and earthquake recurrence intervals on the fault are estimated. The tectonic geomorphology method has determined that the long-term horizontal slip rates on the Tuosuohu, Maqin and Ma- qu segments from west to east are 11.2±1, 9.3±2, and 4.9±1.3 mm/a while their vertical slip rates are 1.2±0.2, 0.7±0.1, and 0.3 mm/a in the late Quaternary. Results indicate that the slip rates regularly decrease along the eastern -300 km of the fault from 〉10 to 〈5 mm/a. This is consistent with the decrease in the gradient such that at the slip rate break point is at the triple point intersection with the transverse fault, which in turn is transformed to the Awancang Fault. The vector decomposition for this tectonic transformation shows that the western and eastern branches of the Awancang Fault fit the slip-partitioning mode. The slip rate of the southwestern wall is 4.6 mm/a relative to the northeastern wall and the slip direction is 112.1°. The mid-eastern part of the Kunlun Fault can be divided into three independent segments by the A'nyemaqen double restraining bend and the Xigongzhou intersection zone, which compose the surface rupture segmentation indicators for themselves as well as the ending point of the 1937 M7.5 Tuosuohu earthquake. The average recurrence interval of the characteristic earthquakes are estimated to be 500-1000 a, respectively. The latest earthquake ruptures occurred in AD 1937 on the western Tuosuohu segment, as compared to -514-534 a BP on the Maqin segment, and -1055 to 1524 a BP on the Maqu segment. This may indicate a unidirectional migration for surface rupturing earthquakes along the mid-eastern Kunlun Fault related to stress triggered between these segments. Meanwhile, the long-term slip rate is obtained through the single event offset and the recurrence interval, which turn out to be the same results as those determined by the offset tectonic geomorphology method, i.e., the decreasing gradient corresponds to the geometrical bending and the fault's intersection with the transverse fault. Therefore, the falling slip rate gradient of the mid-eastern Kunlun Fault is mainly caused by eastward extension of the fault and its intersection with the transverse fault.展开更多
文摘Various shaped mafic microgranular enclaves (MMEs) together with several mafic massifs are developed within the Yuegelu granitoid pluton in the eastern part of the Eastern Kunlun. On the basis of detailed field geological surveying and of the results of the petrological and geo-chemical studies it is suggested that there must be some ge-netic relationship among the granodiorite host, the MMEs and the hornblende (Hb)-gabbro massifs. Magmatic zircon grains are extracted from samples of granodiorite host rock, Hb-gabbro and the MMEs for U-Pb dating. The U-Pb ages are determined by using SHRIMP Ⅱ technique, which yields the ages of 242±6 Ma, 239±6 Ma and 241±5 Ma, respectively. The overall correspondence in the U-Pb dating results of them excludes the possibility that the MMEs in the granitoids are solid refractory relics from the source region or that they are xenoliths from the wall rocks. It can also rule out the possibility of a later emplacement of basic magma after the solidification of the granitoids. This dating result indicates that they are the products of magma mixing in early-mid Triassic epoch. Among them the granitoid host is chemically akin to the acidic end member during the magma mixing process, the Hb-gabbro is akin to the basic ones while the MMEs are the incompletely mixed basic magma clots trapped in the acidic magma. Combined with the results from other researches on this pluton it is reasonable to con-sider that in the mid-Triassic the Eastern Kunlun granitoid belt had undergone a process of magma mixing between the mantle-derived basic magma and the crustal acidic magma which indicates that the injection of mantle materials and energy into the crust and the reactions between them played an important role in the formation of the granitoid rocks.
基金supported by National Natural Science Foundation of China (Grant Nos. 40821160550 and 40974057)International Scientific Joint Project of China (Grant No. 2009DFA21280)
文摘The Kunlun Fault, an active fault on the border between the Bayan Har and Kunlun-Qaidam blocks, is one of the major left lateral strike-slip faults in the Tibetan Plateau. Previous research has not reached a consensus on agreeable slip rates along much of its length and the slip rate gradient along the eastern part, both of which play critical roles in a range of models for the eastward extrusion and thickened crust of the Tibetan Plateau. New slip rates have been determined at sites along the eastern part of the Kunlun Fault by dating deposits and measuring atop displaced fluvial terrace risers. Field investigations and interpretation of satellite images reveal geometrical features of the fault and the late Quaternary offset, new earthquake ruptures and surface-rupturing segmentation, from which long-term slip rates and earthquake recurrence intervals on the fault are estimated. The tectonic geomorphology method has determined that the long-term horizontal slip rates on the Tuosuohu, Maqin and Ma- qu segments from west to east are 11.2±1, 9.3±2, and 4.9±1.3 mm/a while their vertical slip rates are 1.2±0.2, 0.7±0.1, and 0.3 mm/a in the late Quaternary. Results indicate that the slip rates regularly decrease along the eastern -300 km of the fault from 〉10 to 〈5 mm/a. This is consistent with the decrease in the gradient such that at the slip rate break point is at the triple point intersection with the transverse fault, which in turn is transformed to the Awancang Fault. The vector decomposition for this tectonic transformation shows that the western and eastern branches of the Awancang Fault fit the slip-partitioning mode. The slip rate of the southwestern wall is 4.6 mm/a relative to the northeastern wall and the slip direction is 112.1°. The mid-eastern part of the Kunlun Fault can be divided into three independent segments by the A'nyemaqen double restraining bend and the Xigongzhou intersection zone, which compose the surface rupture segmentation indicators for themselves as well as the ending point of the 1937 M7.5 Tuosuohu earthquake. The average recurrence interval of the characteristic earthquakes are estimated to be 500-1000 a, respectively. The latest earthquake ruptures occurred in AD 1937 on the western Tuosuohu segment, as compared to -514-534 a BP on the Maqin segment, and -1055 to 1524 a BP on the Maqu segment. This may indicate a unidirectional migration for surface rupturing earthquakes along the mid-eastern Kunlun Fault related to stress triggered between these segments. Meanwhile, the long-term slip rate is obtained through the single event offset and the recurrence interval, which turn out to be the same results as those determined by the offset tectonic geomorphology method, i.e., the decreasing gradient corresponds to the geometrical bending and the fault's intersection with the transverse fault. Therefore, the falling slip rate gradient of the mid-eastern Kunlun Fault is mainly caused by eastward extension of the fault and its intersection with the transverse fault.